Amplifier Parts

Chassis Strap - generic, for mounting amplifier
Generic amplifier chassis straps. Mounting hardware sold separately. Sold individually.
Starting at $2.20
Fuse - Fast-Blow, 250V, 3AG, 0.25" x 1.25"
Protect your expensive investment or hobby with inexpensive fuses.
Starting at $2.25
package of 5
Turrets - Bifurcated, for use on 3mm boards
Bifurcated turrets for use on boards measuring 3mm thick. Made of nickel plated copper. These are sometimes referred to as split or forked turrets. For use with 2mm boards, see S-HTUR-BI-2S. Stake and anvil required for mounting. Staking Tool is our part number S-T1715. Anvil is our part number S-T1717. For a budget tool set see S-T-STAKE-SET.
$2.25
package of 10
Screw - #3 x ⅜”, Phillips, Round Head, Sheet Metal, Nickel-plated
#3 x ⅜” Phillips drive wood screws made of nickel plated steel. This style of round head screw is commonly used to secure Kluson and Kluson style tuners as well as string trees on Fender® guitars.
$2.25
package of 7
Receptacle - IEC C14, Snap-in Panel Mount
High quality snap-in IEC C14 power entry connector. The connector is easy to install and is rated for 250VAC at 15A. The quick disconnect terminals can also be directly soldered to. Features:
  • High quality thermoplastic housing
  • Copper alloy terminals (4.8mm width)
  • Quick installation
  • Fits 0.8mm to 2mm thick panels
$2.29
Turrets - Bifurcated, for use on 2mm boards
Bifurcated turrets for use on boards measuring 2mm thick. Made of nickel plated copper. These are sometimes referred to as split or forked turrets. For use with 3mm boards, see S-HTUR-BI-3S. Stake and anvil required for mounting. Staking Tool is our part number S-T1715. Anvil is our part number S-T1717. For a budget tool set see S-T-STAKE-SET.
$2.30
package of 10
Handle Hinge - Nickel, metal construction, Lift Off
Metal lift-off hinge. 0.17" mounting hole diameter for use with #8 screws.
$2.35
Cord - Replacement Black, Non-Polarized
Black SPT-1 power cable
  • non-polarized
  • tinned leads
  • 6 foot length
  • 18 AWG.
$2.44
Screw - 10-32, Phillips, Flat Head, Machine, stainless steel
Phillips flathead machine screw, 10-32 stainless steel. Fine thread. Designed to go through a hole or nut that is pre-tapped to form a mating thread for the screw. This style head is used in applications where protrusion of the fastener above the mating surface is unacceptable. Phillips drive is the most common drive used and is designed to "camout" when the screw reaches optimum tightness, thus preventing damage to the screw head. Made from austenitic stainless steels. It contains chromium creating an invisible surface film that resists oxidation making the metal corrosion resistant. If the surface layer is damaged, it rebuilds itself in the presence of oxygen.
$2.45
package of 5
Screw - #8-32 x 3.25", for Chassis Straps
#8-32 x 3 ¼" chassis strap screw. Single piece.
$2.49
Covers - for Chassis Socket Hole, Steel
Steel plates for covering unused socket holes on modified chassis. These covers provide a safe solution for modifying any chassis. These covers use elongated mounting holes to fit a variety of socket hole sizes. P-ST9-CVR
  • 9 pin (noval) socket hole cover
  • 5mm x 3.5mm mounting holes
  • 27.1mm center to center

P-ST8-CVR
  • 8 pin (octal) socket hole cover
  • 6.5mm x 3.5mm mounting holes
  • 40mm center to center

P-ST8-ST9-CNVRT
  • 8 pin to 9 pin (octal to noval) socket adapter
  • Bottom mount 9 pin socket recommended
Starting at $2.50
Fuse Holder - 3AG-Type, High Quality
High quality fuse holder used with 3AG type fuse. Fits in a 1/2" diameter chassis hole. Frame and cap material: phenolic Terminal material: Nickel-plated brass Mounted by nut
$2.55
Screw - #8 x 1 ¾”, Slotted, Oval Head, Wood, Nickel-plated
#8 x 1 ¾” slotted drive wood screws made of nickel plated steel. This style of oval head screw is commonly used for mounting the bridge plate on early Telecaster® guitars including the Nocaster® and Esquire® guitars.
$2.59
package of 4
Screw - #6 x 1 ¼”, Phillips, Round Head, Wood, Nickel-plated
#6 x 1 ¼” Phillips drive wood screws made of nickel plated steel. This style of round head screw is commonly used on vintage style Fender® Stratocaster® bridges mounted directly to the body using six screws.
$2.59
package of 6
Fiberboard - Vulcanized, 3" x 15", .062" Thick
Vulcanized Fiberboard, used for laying out circuits using eyelets such as S-HEYE-A and our staking tool S-T1715.
  • .062" thick
  • 3" x 15"
$2.65
Insulation Cover - Fuse Holder, 15.5 x 36.8mm, PVC
High quality insulation cover for panel mount fuse holders. The cover is made of a thick durable PVC and fits many fuse holders. The wire sleeve can securely fit over any standard wire gauge used with fuse holders providing a fully insulated fuse connection.
Features
  • Provides insulation against shock on rear of fuse holder
  • PVC
  • UL94V-0 rated flame retardant material

Fits S-H205
$2.65
Washer - #8, Internal-External Tooth Lock, Steel
Steel lock washers that use both internal and external teeth for locking and tension. The teeth dig into the screw head or nut and the joint. These washers provide greater vibration resistance than split lock washers. Steel lock washers like these can be found in vintage Fender® blackface and silverface amplifiers for securing speakers to the cabinet. These washers have a zinc finish.
$2.65
package of 10
Caster - Swivel, 2" wheel, Fender Replacement
Heavy duty swivel caster for use on Fender and other amps. Each 2" diameter wheel supports 45.359Kg / 100Lb.
Starting at $2.70
Fuse Holder - for Fender®, 3AG-Type
High quality Fender® Style fuse holder replacement for guitar amplifiers.
  • Fits ½" chassis hole diameter
  • Mounted by Nut
$2.75
Screw - #6 x ¾", Flat Head, Stainless Steel
Stainless steel flat head Phillips self-tapping screws. #6 x 3/4" length. Good for use with P-H266 & P-H267 & P-H1087N.
$2.89
package of 8
Finishing Washer - Nickel-plated Brass, Countersunk, Flush, Fender Style
Flush finishing washers made of nickel plated brass. Designed for accommodating the heads of countersunk screws. These washers provide additional bearing area on the material being fastened and can be used to give a neat, finished appearance. This design closely resembles the flush finishing washers found on earlier blackface Fender® amplifier cabinets. The #6 size is used for back panels on combo amps and heads. The #8 is used for extension cabinet back panels. For the later flanged style finishing washers used on these amps, see S-HXFW-2N.
Starting at $2.95
package of 10
Label - 4-Band Resistor Color Code Chart
Two inch wide sticker featuring the 4-band resistor color code chart. This sticker is a great reference when checking resistor values using the color codes. It is easy to read but small enough to place on a workbench, tool box, organizer, or even a soldering station.
$2.95
Screw - 8-32 x ½”, Phillips, Round Head, Machine, Brass
8-32 x ½” Phillips round head machine screws made of solid brass. These brass round head screws visually match the screws found on vintage Marshall amplifiers. They are a great choice for restoration or replica builds. The 8-32 x ½” size works in place of original M4.5 screws that were used for mounting the power and output transformers. These will also work well in many other types of projects. Brass round head screws are available in the following sizes: Diameter/TPI SKU 4-40 S-HSB4-X 6-32 S-HSB6-X 8-32 S-HSB8-12 Pairs with S-HBNX brass nuts and S-HLWX-B lock washers. S-HBWX flat washers are also available.
$2.95
package of 5
Screw - #3 x ⅜”, Slotted, Round Head, Sheet Metal, Nickel-plated
#3 x ⅜” slotted drive wood screws made of nickel plated steel. This style of round head screw is commonly used to secure Kluson and Kluson style tuners as well as string trees on early Telecaster® guitars including the Nocaster® and Esquire® guitars.
$2.95
package of 7