Amplifier Parts

Zinc t-nut. Used for fastening metal to products made of wood, particle board or plastic. Low carbon steel. Package of 5. Multiple sizes available.

Panel mount LED lenses made of high quality polycarbonate. These lenses provide a clean semi-flush appearance with a small panel footprint and work well in any project using LED indicators. Features:

• 0.171” mounting hole
• For panel thicknesses of 0.031” to 0.125″
• Fresnel lens
• Low Profile
• Fits standard 3mm LEDs

For a version that fits 5mm LEDs, see P-L710-X.

#6-32 x 1-¼” machine screws made of bronze plated steel. This style of rosette head screw is similar to the baffle mount screws found on many early Fender® tweed amplifiers. For an 8-32 rosette head screw, see S-HRS8-1116.

Original white Marshall™ logo for use on Marshall amplifiers.

#6 steel finishing washers. Designed for accommodating the heads of countersunk screws. It provides additional bearing area on the material being fastened and can be used to give a neat, finished appearance. Made of 18-8 stainless steel.

#8-32 x 1 1/16” machine screws made of brass plated steel. This style of rosette head screw is similar to the baffle mount screws found on many early Fender® tweed amplifiers. For a 6-32 rosette head screw, see S-HRS6-114.

18-8 stainless steel sheet metal screws. These flat head #10 screws have a length of ¾” and are commonly used to secure cable clamps directly to the cabinet for AC power cables used in vintage Fender® blackface and silverface combo amps. For the smaller #8 screws often used with reverb cables, see S-HFS8-34.

Ampeg plastic "a" logo (mounting centers: 2 1/4" x 2 3/8")

Plastic IEC C14 connector for power entry. This power receptacle mounts with two screw holes which are counterunk for a clean look when using countersunk screws. This is a 3 prong connector for power cables with ground connections. Internal connections can be soldered into place or used with quick disconnects. This receptacle features a built-in fuse holder for 5mm x 20mm fuses. See Specifications, Files, and Documents for a datasheet with dimensions and panel cut out sizing.

Phillips panhead machine screw, 10-32, zinc. Phillips panhead machine screw, 4-40, zinc. Designed to go through a hole or nut that is pre-tapped to form a mating thread for the screw. Has a general purpose bearing area and can be substituted in most applications for round, truss, or binding heads. Phillips drive is the most common drive used and is designed to "camout" when the screw reaches optimum tightness, thus preventing damage to the screw head.

Vox style black plastic handle with diamond pattern and brackets. Center to center measurement is 6 1/4".
See S-H105 for compatible screws and T-nuts.

#8 Phillips drive wood screws made of nickel plated steel. This style of oval head screw is commonly used on Fender® blackface and silverface speaker cabinets to secure the back panel. They are also used to attach baffle boards on amps from this era. They are also the same type used for securing strap buttons as well as for mounting necks on Telecaster®, Stratocaster®, and other Fender® guitars.

Imperial threaded hex nuts made of 18-8 stainless steel. Hex nuts like these can be found in countless pieces of equipment such as Fender® blackface, silverface, and tweed amplifiers for securing hardware, transformers, and speakers.

Black plastic AC power entry module with built in fuse holder. This power entry module is rated at 10A, 250VAC and fits 5mm x 20mm fuses. Mates with S-W123 & S-W124

Retro fit for Fender, Molded dogbone style. 6" center to center. Replacement for Fender: 099-0946-000. For handle mounting hardware, see part number S-H105.

Through-hole PCB mounted fuse holder clips found in Peavey amps and other electronics. These small clips allow for minimal space fuse mourning directly on PCB’s. Fits GMA 5×20mm fuses. A pair is required to mount a fuse. Sold individually.

3-leg black, standard. 18 gauge steel, ½" radius. Sold individually.

Long life general replacement lamps for dials, indicators, etc.

Marshall back corners with gold rivets. 3/4" radius.
For similar generic back corners, see P-H3080.

Self tapping Phillips panhead machine screw #8, zinc type AB. Type AB screws tap their own mating internal thread. They require a preformed hole for installation into metallic materials but not necessary for wood or plastic materials. Combines locating point of Type A with thread size and pitch of Type B. Normal limitations of Type B apply. Has a general purpose bearing area and can be substituted in most applications for round, truss, or binding heads. Provides good control in driving and is the most recommended drive.

#3 x ⅜” Phillips drive wood screws made of nickel plated steel. This style of oval head screw is commonly used on Gibson® pickguards, truss rod covers, and some humbucker rings.

These Tube Amp Doctor black plastic corners are great replacements for certain Vox® amps from 1966 to 2004 and Orange® amps and cabinets that feature this type. The two larger holes are for use with screws while the small holes are intended for pins/nails just like the originals.

Genuine Marshall™ large plastic vent. Measures 17 5/8" in length and 3" in width.

Protect your expensive investment or hobby with inexpensive fuses. • GMA Type • Measures .78"(20mm) in length, 0.19"(5mm) in diameter • Fast-Blow • Package of 5