Amplifier Parts

Clamp - Speaker Grill Mount, Plastic
Black plastic clamp for mounting speaker grills. Sold individually, mounting hardware not included.
$0.85
Turrets - Bifurcated, for use on 3mm boards
Bifurcated turrets for use on boards measuring 3mm thick. Made of nickel plated copper. These are sometimes referred to as split or forked turrets. For use with 2mm boards, see S-HTUR-BI-2S. Stake and anvil required for mounting. Staking Tool is our part number S-T1715. Anvil is our part number S-T1717. For a budget tool set see S-T-STAKE-SET.
$2.25
package of 10
Indicator Light Clip - Marshall, for securing lights
Clip for square Marshall indicator lights - used to secure the indicator lights in place
$5.20
Screw - #3 x ⅜”, Phillips, Oval Head, Wood, Nickel-plated
#3 x ⅜” Phillips drive wood screws made of nickel plated steel. This style of oval head screw is commonly used on Gibson® pickguards, truss rod covers, and some humbucker rings.
$1.59
package of 5
Handle - Case, Fender style, 4.5" center to center
Colors Available:
For Fender and other cases. 4 1/2" center to center.
Starting at $4.85
Foot - Rubber, 1.5" x .75", with Metal Washer
1 ½" diameter x ¾" high with metal washer. Sold individually.
$2.20
Foot - Rubber, 1.5" diameter x .425" tall
Rubber foot. 1.5" diameter x 0.425" height. 0.175" diameter mounting hole for use with #8 screws. (Sold individually, mounting hardware not included).
$1.25
Fuse - Fast-Blow, Miniature, GMA-type 5mm x 20mm
Protect your expensive investment or hobby with inexpensive fuses. • GMA Type • Measures .78"(20mm) in length, 0.19"(5mm) in diameter • Fast-Blow • Package of 5
Starting at $3.25
package of 5
Foot - Marshall, Sprung Amplifier Head
Original Marshall™ Sprung feet. Screws are included.
$10.75
package of 2
Out of Stock
Receptacle - IEC C14, Bulgin, Replacement for Marshall Pignose
Black nylon AC power entry connector with the same mounting dimensions as the original Bulgin “Pignose” connectors used on early Marshall amps. This connector allows the amp to be fitted with a safer connector with no modifications to the chassis. Mounting hardware not included.
$4.95
Foot - Rubber, 1.5" diameter x 1.9" tall, with metal washer
1 ½" diameter x 1 3/16" high with metal washer. Sold individually.
$1.50
Handle - Black Metal, Recessed for Cabinet
Recessed black metal handle for installation in cabinets
Starting at $8.35
LED Lens - Square, Fresnel, Polycarbonate, 3mm
Colors Available:
Panel mount LED lenses made of high quality polycarbonate. These square lenses provide a clean semi-flush appearance with a small panel footprint and work well in any project using LED indicators. Features:
  • 0.171” mounting hole
  • For panel thicknesses of 0.031” to 0.125″
  • Fresnel lens
  • Low Profile
  • Fits standard 3mm LEDs
$0.85
Screw - #8, Phillips, Oval Head, Wood, Nickel-plated
#8 Phillips drive wood screws made of nickel plated steel. This style of oval head screw is commonly used on Fender® blackface and silverface speaker cabinets to secure the back panel. They are also used to attach baffle boards on amps from this era. They are also the same type used for securing strap buttons as well as for mounting necks on Telecaster®, Stratocaster®, and other Fender® guitars.
Starting at $2.15
package of 4
Washer - Flat, M6, Stainless Steel, Oversized
Stainless steel M6 flat washers that are nearly identical to the chassis mounting washers used on many Marshall amps. These oversized M6 washers pair with 30mm M6 screws S-HSM6-1X30-SS to attach the amplifier chassis to the head cabinet. Fits any Marshall head that uses M6 screws. Also fits #12 imperial screws.
$1.49
package of 5
Dial Lamp - NE51, T-3-¼, 90/110V, .0003A, Bayonet Base
Long life general replacement lamps for dials, indicators, etc. Sold individually.
$1.95
Indicator Light - for Marshall, Red Square, 120V
Indicator light, square. 120 Volts. Measures: 0.47" Length x 0.47" Width x 0.09" Depth (3/8" mounting hole)
$4.85
Screw - #8 x ¾”, Phillips, Flat Head, Sheet Metal, Stainless Steel
18-8 stainless steel sheet metal screws. These flat head #8 screws have a length of ¾” and are commonly used to secure cable clamps directly to the cabinet for RCA reverb tank cables used in vintage Fender® blackface and silverface combo amps. For the larger #10 screws often used with power cables, see S-HFS10-34.
$1.59
package of 5
LED Lens - Flat Cylindrical, Fresnel, Polycarbonate, 3mm
Colors Available:
Panel mount LED lenses made of high quality polycarbonate. These flat cylindrical lenses provide a unique retro appearance with a small panel footprint and work well in any project using LED indicators. Features:
  • 0.171” mounting hole
  • For panel thicknesses of 0.031” to 0.094″
  • Fresnel lens
  • Flat cylindrical shape
  • Fits standard 3mm LEDs
$0.85
Corners - Fender, for amplifier, Nickel, 2-Hole with hardware
Pure Vintage 2-screw mount amplifier, package of 4, screws included.
  • Set of four nickel-plated replacement amplifier corners for effective amplifier protection
  • Includes eight mounting screws
  • Introduced on Blonde, Brown, and Blackface™-era amplifiers
  • Used on Cyber-Champ, Stage™ 100/160/112 SE, Ultimate™ Chorus, Princeton® 65 DSP/650, GE-112 Enclosure, Tone Master® enclosure, Vibro-King® 212 enclosure, '94 Twin, Acoustasonic™ Jr. DSP, Deluxe™ 90 DSP/900, Cyber-Twin®/Cyber-Twin SE, Concert, '65 Super Reverb®, Bullet® 15 DSP, Acoustasonic SFX II, Stage 1000/1600, '65 Twin Custom® 15, Steel King™, Princeton® Recording Amp and Super-Sonic™ series amplifiers
$8.45
package of 4
Turret Strip - 60 Lugs, Two Rows, U-style
Two rows of 30 U-style terminals (60 total) on a black board. The U-style terminal strips are spaced 8.3mm apart allowing for more densely populated point-to-point builds. The boards are 0.063” thick.
$5.99
Handle - Black plastic strap, Nickel end caps
Black plastic handle with nickel end caps. Screws are not included.
$4.35
Turret Board - Blank, 189 Holes, 10 ⅛” x 2 ⅝”, Phenolic
Vintage style phenolic turret boards with a 3mm thickness. The phenolic material matches the appearance and construction of those used in classic amplifiers from Marshall and others. These boards are made of the highest grade phenolic material and are rated for high voltage applications. They have a high mechanical strength in addition to their high dielectric strength making them the perfect candidate for turret board based tube amplifiers.
This 189 hole version has 7 rows and 27 columns. This size can be found in vintage Marshall amps such as the 1973 and 1974 18W amps, 20W amps such as the 2022T JMP Tremolo 20, 2061 Lead-Bass, PA20, and the 10W 1930 Popular.
Complete the vintage turret board look with S-HTUR-PR-BI-3S turrets.
$7.50
Handle - Fender®, molded Dogbone style
Colors Available:
Original Fender® handle, brown molded dogbone style. 6" center to center. Includes mounting hardware. Fender part number: 099-0946-000
$11.95