Amplifier Parts

Original Fender® handle, brown molded dogbone style. 6" center to center. Includes mounting hardware. Fender part number: 099-0946-000

Pure Vintage Amplifier Handle (2-screw mount)

• Black amplifier handle with vinyl sleeve over steel strap and two-screw end caps
• Includes mounting hardware (four screws and T-nuts)
• Used on Cyber Twin, Cyber Twin SE, Cyber Deluxe, Stage™ series, Deluxe 90 DSP/900, Ultimate Chorus™, Princeton 65 DSP, '65 Twin Custom®, '94 (Evil) Twin®, "The Twin", Deluxe VM, Bandmaster VM Head, Steel King, and Bassman® 300 amplifiers
• 8" center to center. 9 ¼" handle length without end caps.

Original Marshall™ Sprung feet. Screws are included.

230 x 70 mm, loaded with 33 turrets,2 mm board thickness. This is designed for a 5E3 board.

Black plastic handle with nickel end caps. Screws are not included.

Rubber foot. 1.5" diameter x 0.425" height. 0.175" diameter mounting hole for use with #8 screws. (Sold individually, mounting hardware not included).

Package of 4 rubber feet (15/16" diameter x ⅜" height) mounting hole is good for #6 screws.

Hex nut for Fender® potentiometers. Package of 12.

#4 x ½” Phillips drive sheet metal screws made of nickel plated steel. This style of oval head screw is commonly used on Fender® pickguards, tremolo covers, and some bridge covers.

Original Marshall™ cabinet logo frame. This mounts to original Marshall™ cabinets using two screws. The adhesive backed badge is then adhered to this frame.

• Fits 1960 cabinets
• Black plastic
• For 29 x 85mm logos
• Screw mount

Note: Faceplates sold separately.
Faceplates sold separately.

Stainless steel flat head Phillips self-tapping screws. #6 x 3/4" length. Good for use with P-H266 & P-H267 & P-H1087N.

Replacement handle for Fender® and other amps (8.27" from mounting center to mounting center). The rubber handle is steel reinforced with steel angular end caps. Mounting hardware sold separately.

Made for Fender® and used on a variety of vintage and contemporary models. Package contains twelve Phillips head (10-32 X 1-½") nickel machine screws used for mounting an amplifier chassis. Used on '57 Twin®, Blues Deluxe™/DeVille™, Pro Junior™, Hot Rod Deluxe™/DeVille™, Blues Junior™, '59 Bassman®, '63 Fender® Tube Reverb, Bronco™, Bass Breaker™, '57 Deluxe™, Bassman® TV Series, EC Twinolux™/Tremolux™, '57 Champ®, EC Vibro-Champ™, and '57 Bandmaster™ amplifiers manufactured from 1994-Present.

Stainless steel lock washers that use external teeth for locking and tension. The external teeth dig into the screw head or nut and the joint. These washers provide greater vibration resistance than split lock washers. Steel lock washers like these can be found in vintage Fender® blackface, silverface, and tweed amplifiers for securing hardware, transformers, and speakers.

Vintage strap. Large, black with black caps. Includes:

• 2 × Countersunk screws - M5 x 0.8, overall length of 25 mm
• 2 × Mounting brackets
• 2 × Black "Marshall" bracket covers
• 1 × Rubber handle with metallic insert

Fuse holder cap for Marshall™ 900 series amps. Measures 5/8" in length. Fits into S-H213

Gum rubber chassis mounting washers as used on thirties vintage Zenith and Philco radio. 1/4 inner dia. Allows proper dial centering in cabinet opening. Adhesive backing for lamenating to other washers to increase thickness. Overall dimensions 7/8" dia. x 1/8" thick.

Marshall style front corner made of black plastic with a satin surface. These corners feature ¾" radius and three mounting holes. These corners can be used on both straight and slanted cabinets. These corners are a great option for amplifier cabinets and other equipment.
Similar to the genuine Marshall front corners P-H1091.

Replacement handle for vintage ampeg amps. Will work on other amplifiers as well. Center to center measurement is 6".

Recessed plastic side handle for cabinets. Outer Dimensions: 6.19" x 10.63". Molded with a 1.75" Marshall logo.

Stainless steel pan head Phillips self-tapping screws. #6 X ¾" length. Good for use with #'s 3,4 and 5.

Silver cap for Marshall vintage style handles. Sold individually.

Genuine Marshall front corner set. These corners feature 3/4" radius and three mounting holes. These corners can be used on both straight and slanted cabinets. Includes gold mounting rivets. Sold in package of four corners.
For similar generic front corners, see P-H3081.

200mm x 45mm turret board with two rows of of 20 turrets. These turrets are seamless contact pin style turrets. Each turret features an additional solderpad for adding additional components or wiring. This board has four mounting holes.