Amplifier Parts

Handle - Marshall, Black Vintage, Black Caps, Large, Strap
Vintage strap. Large, black with black caps. Includes:
  • 2 × Countersunk screws - M5 x 0.8, overall length of 25 mm
  • 2 × Mounting brackets
  • 2 × Black "Marshall" bracket covers
  • 1 × Rubber handle with metallic insert
$10.76
Out of Stock
Tilt Back Leg Kit - Fender, for tilting amps
If your ears were attached to your knees, your amp would sound better, but since they usually are located on the sides of your head, Fender® has Tilt-back Legs! Secured to the sides of your amp cabinet, these legs allow you to tilt you amp back so you can hear what you're doing!
  • BF Bandmaster, BF Twin Reverb, SF Bantam Bass, SF Pro Reverb, SF Vibrosonic Reverb, Blonde Bandmaster, BlondeTwin
  • Comes with mounting hardware
Starting at $40.95
package of 2
Turret Board - Black, 2mm, Loaded with 33 Turrets, 230mm x 70mm
230 x 70 mm, loaded with 33 turrets,2 mm board thickness. This is designed for a 5E3 board.
$15.36
Foot - Rubber, ⅜" height x ~\frac{15}{16}~" diameter
Package of 4 rubber feet (15/16" diameter x ⅜" height) mounting hole is good for #6 screws.
$4.29
package of 4
Tagboard - 300mm x 56mm, 2 x 28 Tags
300mm x 56mm tagboard with two rows of 28 tags. Each connector features two lugs, one facing inward and one facing outward. This can be helpful when connecting components using the inner lugs which leaves the outside lugs open for wiring. A center row of holes can be used for running wires beneath the board as well as for standoffs.
$10.00
Screw - #6 x ¾", Flat Head, Stainless Steel
Stainless steel flat head Phillips self-tapping screws. #6 x 3/4" length. Good for use with P-H266 & P-H267 & P-H1087N.
$2.89
package of 8
Logo - Marshall, Gold Script on white plastic, 6"
Original Marshall™ mini logo.
  • Fits 1959HW, Bluesbreaker model 1962 and others.
  • Gold lettering on white plastic
  • 6” (40 x 150 mm)

Not for resale. For repair or replacement only.
$29.95
Out of Stock
Nut - Fender, Hex Type, for Potentiometers
Hex nut for Fender® potentiometers. Package of 12.
$4.45
package of 12
Finishing Washer - Nickel-plated Brass, Countersunk, Flanged, Fender Style
Flanged finishing washers made of nickel plated brass. Designed for accommodating the heads of countersunk screws. These washers provide additional bearing area on the material being fastened and can be used to give a neat, finished appearance. This design closely resembles the flanged finishing washers found on later blackface and silverface Fender® amplifier cabinets. The #6 size is used for back panels on combo amps and heads. The #8 is used for extension cabinet back panels. For the earlier flush style finishing washers used on these amps, see S-HXFW-1N.
Starting at $5.35
package of 10
Corner - Marshall, Black Plastic, 3-Hole, with rivets
Genuine Marshall front corner set. These corners feature 3/4" radius and three mounting holes. These corners can be used on both straight and slanted cabinets. Includes gold mounting rivets. Sold in package of four corners.
For similar generic front corners, see P-H3081.
$6.75
package of 4
Out of Stock
Turret Board - Black, 3mm, Loaded with 52 Turrets, 258mm x 76mm
258 x 76 mm, loaded with 52 turrets, 3 mm board thickness. This is designed for a for a JTM45 board. Our turrets, part number S-HTUR-BX will fit on this board.
$16.46
Handle - Fender Style, Black strap, Black Metal Caps
Replacement handle for Fender® and other amps (8.27" from mounting center to mounting center). The rubber handle is steel reinforced with steel angular end caps. Mounting hardware sold separately.
$4.29
Screw - #3 x ¼”, Phillips, Round Head, Wood, Nickel-plated
#3 x ¼” Phillips drive wood screws made of nickel plated steel. This style of round head screw is commonly used on Gibson® truss rod covers.
$1.79
package of 5
Finishing Washer - #4, Countersunk
#4 finishing washers. Designed for accommodating the heads of countersunk screws. It provides additional bearing area on the material being fastened and can be used to give a neat, finished appearance.
Starting at $1.35
package of 10
Faceplate Mount - Marshall, Cabinet Logo Frame
Original Marshall™ cabinet logo frame. This mounts to original Marshall™ cabinets using two screws. The adhesive backed badge is then adhered to this frame.
  • Fits 1960 cabinets
  • Black plastic
  • For 29 x 85mm logos
  • Screw mount

Note: Faceplates sold separately.
Faceplates sold separately.
$6.50
Fuse Holder Cap - Marshall, for 900 Series
Fuse holder cap for Marshall™ 900 series amps. Measures 5/8" in length. Fits into S-H213
$3.50
Tagboard - 40 Turret Pins, High Quality
200mm x 45mm turret board with two rows of of 20 turrets. These turrets are seamless contact pin style turrets. Each turret features an additional solderpad for adding additional components or wiring. This board has four mounting holes.
$9.87
Screws - Fender, 10-32x1.5", Phillips Head, Vintage Amp
Made for Fender® and used on a variety of vintage and contemporary models. Package contains twelve Phillips head (10-32 X 1-½") nickel machine screws used for mounting an amplifier chassis. Used on '57 Twin®, Blues Deluxe™/DeVille™, Pro Junior™, Hot Rod Deluxe™/DeVille™, Blues Junior™, '59 Bassman®, '63 Fender® Tube Reverb, Bronco™, Bass Breaker™, '57 Deluxe™, Bassman® TV Series, EC Twinolux™/Tremolux™, '57 Champ®, EC Vibro-Champ™, and '57 Bandmaster™ amplifiers manufactured from 1994-Present.
$5.85
package of 12
Washer - External Tooth Lock, Stainless Steel
Stainless steel lock washers that use external teeth for locking and tension. The external teeth dig into the screw head or nut and the joint. These washers provide greater vibration resistance than split lock washers. Steel lock washers like these can be found in vintage Fender® blackface, silverface, and tweed amplifiers for securing hardware, transformers, and speakers.
Starting at $1.09
package of 10
Handle - Marshall, Black Plastic, Recessed for Cabinet
Recessed plastic side handle for cabinets. Outer Dimensions: 6.19" x 10.63". Molded with a 1.75" Marshall logo.
$24.95
Capacitor Cover - Fender®, for Twin Reverb
Capacitor cover for Fender® Twin Reverb. Mounting centers are 7 1/8" x 3.5". Measurements are 7 1/8" x 3 ½" x 1 ¼".
$20.95
Anti-Skid Tray - Marshall, for 1960A and Other Cabinets
Original Marshall black plastic skid. Inscribed with "Marshall" logo. Used on 1960A and other cabinets. Package of one includes 6 gold rivets.
$11.50
Out of Stock
Screw - #4 x ½”, Phillips, Oval Head, Sheet Metal, Nickel-plated
#4 x ½” Phillips drive sheet metal screws made of nickel plated steel. This style of oval head screw is commonly used on Fender® pickguards, tremolo covers, and some bridge covers.
$1.25
package of 5
Screw - #6 x ¾", Pan Head, Stainless Steel
Stainless steel pan head Phillips self-tapping screws. #6 X ¾" length. Good for use with #'s 3,4 and 5.
$4.35
package of 12