Amplifier Parts

Replacement latch for Ampeg Flip Top. For use with P-H300-TOP. All rivets and top completely covered. Top has one hole, and projections which bite into the material to prevent turning. With one finger the lever is raised to the vertical, - let go, and it pops open. Surface mounting.

Tweed style hand mounting bracket hardware for P-H262, P-H263, P-H315, and P-H282 amp handles. Sold individually. Screws not included. Multiple color options available.

Screw - Machine, Phillips Flat Head, 10-32 x 1 in., Stainless, package of 5
Nut - T-Nut, Zinc, 10-32, package of 5
Hardware only. Amp handle not included.

Suitcase Type Latch Top. The top is flat with two holes completely hidden. Mates with P-H300.

New-old-stock Soviet pilot lights that operate on 9V. These lights have a unique bakelite frame and metal bezel. The lights come with a 9V bulb but can be used with any voltage bulb that fits this type of socket. The diameter of the light is 12mm and the diameter of the mounting hole is 8.1mm. Includes a wavy washer and knurled nut. Note: There can be small differences in the appearance and tint of the lens and color of the bakelite. A small 0.1” notch must either be filed into the 0.625” mounting hole or filed off of the fuse to flush mount with a panel. The small bulbs can come loose during shipping and reseating the bulb is recommended before use.

New-old-stock Soviet pilot lights that fit screw base bulbs. These lights have a unique bakelite frame and bakelite bezel. The lights come with a 6.3V bulb but can be used with any G-3-½ screw base bulb. The diameter of the light is 0.785” and the diameter of the mounting hole is 0.625”. Includes a bakelite mounting nut. Note: A small 0.2” notch must either be filed into the 0.625” mounting hole or filed off of the light to flush mount with a panel.

Indicator light, square. 120 Volts. Measures: 0.47" Length x 0.47" Width x 0.09" Depth (3/8" mounting hole)

Genuine Marshall purple indicator light used in older models such as the Vintage Modern 2266 and 2266C.

Indicator light, square. 6 Volts. Measures: 0.44" Length x 0.44" Width x 0.27" Depth

Plexi style pilot lights that operate on 120VAC. These lights match the style used on many vintage Marshall amplifiers. The lights use a neon bulb with an internal current limiting resistor so no external circuitry is required for use. The mounting diameter hole is 0.380” (9.65mm). Includes an internal tooth lock washer and hex nut.

Clip for square Marshall indicator lights - used to secure the indicator lights in place

High quality insulation cover for panel mount fuse holders. The cover is made of a thick durable PVC and fits many fuse holders. The wire sleeve can securely fit over any standard wire gauge used with fuse holders providing a fully insulated fuse connection.
Features

• Provides insulation against shock on rear of fuse holder
• PVC
• UL94V-0 rated flame retardant material

Fits S-H205

Fender® style lamp jewels are used on countless amps from all kinds of manufacturers. Threading: 9/16 - 27. Note: When back-lit, the color of the amp jewels will be affected by the color of the bulb behind it.

Fluted dome style lamp jewels were used on vintage equipment from many manufacturers. This jewel fits the standard P-L124-P pilot light found on most Fender amps as well as the P-L110. Threading: 9/16 - 27

Two inch wide sticker featuring the 4-band resistor color code chart. This sticker is a great reference when checking resistor values using the color codes. It is easy to read but small enough to place on a workbench, tool box, organizer, or even a soldering station.

Vintage style AA battery orientation label. This label matches the size and style of those found in original FZ-1 fuzz pedals. It is a great option for replica style builds or other vintage inspired effects.

Danger high voltage label for amplifiers and other equipment. These stickers are a great option for labeling equipment and builds as high voltage whenever necessary. The sticker is a single piece that must be cut to size using scissors or a paper cutter to make a total of four labels. This style of label is perfect for smaller areas like circuit boards, components, heatsinks and other areas inside the chassis.

Vintage style model information label. This label has a line for a model name or number, the serial number, builder name or company, and the build date. This sticker is a great way to provide build info with a professional presentation on the chassis of a pedal or amp.

High voltage warning label for amplifiers and other equipment. These stickers are a great option for labeling equipment and builds as high voltage whenever necessary. The sticker is a single piece that must be cut to size using scissors or a paper cutter to make a total of four labels. This style of label is perfect for rear panels on amplifiers and other equipment.

Vintage style quality assurance label. This label has an electronic test line for the name of a technician responsible for testing the electronics and a sound test line for the name of a technician responsible for testing the functionality of the device. This sticker is a great way to document quality assurance testing with a professional presentation on the chassis of a pedal or amp.

Vintage style service information label. This label has a line for the name of a tech or service company, contact information, and the date of service. This sticker is a great way to provide service info with a professional presentation on the chassis of a pedal or amp.

Lens Diameter: 3 mm Overall Height: 5.4 mm Lens Type: Diffused Multiple color options available.

High brightness 3mm LED. Great for use in pedal builds and other applications where a bold, bright, indicator is needed. Multiple colors available.

• 3mm size
• Water clear
• High brightness
• Multiple colors available
• Package of 5