Amplifier Parts
Screw - #6 x ¾", Pan Head, Stainless Steel
Stainless steel pan head Phillips self-tapping screws. #6 X ¾" length. Good for use with #'s 3,4 and 5.
$4.35
package of 12
Faceplate - Marshall, 1960 Vintage plate
Original Marshall™ 1960 Vintage plate
Not for resale. For repair or replacement only.
Note: Frame sold separately.
- Fits 1960AV and 1960BV cabinets
- Black on gold
- 29 x 85mm
- Adhesive backing
Not for resale. For repair or replacement only.
Note: Frame sold separately.
$5.50
Handle - Fender, Black Plastic, Silver Caps, 2 screws per cap
Pure Vintage Amplifier Handle (2-screw mount)
- Black amplifier handle with vinyl sleeve over steel strap and two-screw end caps
- Includes mounting hardware (four screws and T-nuts)
- Used on Cyber Twin, Cyber Twin SE, Cyber Deluxe, Stage™ series, Deluxe 90 DSP/900, Ultimate Chorus™, Princeton 65 DSP, '65 Twin Custom®, '94 (Evil) Twin®, "The Twin", Deluxe VM, Bandmaster VM Head, Steel King, and Bassman® 300 amplifiers
- 8" center to center. 9 ¼" handle length without end caps.
$12.45
Turrets - Bifurcated, Screw Mount
Bifurcated turrets with a screw mount that works on boards with thicknesses of 1.5mm to 4mm. Made of gold plated brass. These are sometimes referred to as split or forked turrets. Includes a mounting washer, lock washer, and mounting nut. The staking tool is not required for these turrets.
$5.99
package of 10
Handle - vintage Ampeg style, brown strap
Replacement handle for vintage ampeg amps. Will work on other amplifiers as well. Center to center measurement is 6".
$10.95
Label - High Voltage Warning, Large, Sticker
High voltage warning label for amplifiers and other equipment. These stickers are a great option for labeling equipment and builds as high voltage whenever necessary. The sticker is a single piece that must be cut to size using scissors or a paper cutter to make a total of four labels. This style of label is perfect for rear panels on amplifiers and other equipment.
$1.25
package of 4
Handle - Black plastic strap, Black Caps, adjustable 8" - 8.75"
Black plastic handle with black end caps. Mounting centers adjustable from 8" to 8.75". 9 5/8" handle length without end caps. Screws not included.
$2.99
Logo - Fender, plate, for Tweed amplifier
Revive the look of your vintage-style or modern Fender amp with a genuine Fender amplifier logo.
Fender part number: 099-409-6000
- Genuine Fender® tweed amp logo
- Mounting pins included
- Designed for
- Pro Junior™
- Blues Junior™
- JazzMaster™ Ultralight
- plus others
Fender part number: 099-409-6000
$19.95
Foot - Metal Glide, 0.39" Tall, 2 Screw
Zinc plated cold rolled steel glide. 0.39" height, two 0.18" diameter mounting holes (#8 screws), 1.59" mounting center distance.
$0.79
Hardware - Fender, Screws & T-Nuts for Handle
Screw - Machine, Phillips Flat Head, 10-32 x 1 in., Stainless, package of 5
Nut - T-Nut, Zinc, 10-32, package of 5
Hardware only. Amp handle not included.
Nut - T-Nut, Zinc, 10-32, package of 5
Hardware only. Amp handle not included.
$4.10
package of 5
Logo - Ampeg, Script, silver metal for amps
Genuine Ampeg™ Script Logo made of metal for installation on amplifiers.
$20.95
Handle - Marshall Style, Black Vintage, Gold Caps, Large
Black/gold, vintage Marshall style handle. Gold end caps and inner clamps included. Mounting screws not included
$16.75
Turret Board - Black, 2mm, 5F1 Layout
Turret board with pre installed turrets designed to be used to build a 5F1 layout or variants.
- 2mm board
- 5F1 Layout
$5.48
Dial Lamp - #46, T-3-¼, 6.3V, .25A, Screw Base
Long life general replacement lamps for dials, indicators, etc. Sold in packages of 10.
$3.00
package of 10
Fuse Holder Cap - Peavey, top-slotted for screwdriver
Peavey cap for fuse holder. 1 1/16" length x 3/8" diameter. Top slotted for flat head screwdriver.
$5.65
Fuse Block - For GMA / GMD Fuses, Low Profile
Open frame fuse block for GMA or GMD 5×20mm size fuses with a low profile design that features solder terminals made of tin plated brass. A unique design feature provides self-alignment of the clips to the fuse caps. This feature, plus a one-piece clip/terminal design, assures low contact resistance.
$4.95
Handle Cap - Marshall Style, Silver
Silver cap for Marshall vintage style handles. Sold individually.
$1.99
Label - 4-Band Resistor Color Code Chart
Two inch wide sticker featuring the 4-band resistor color code chart. This sticker is a great reference when checking resistor values using the color codes. It is easy to read but small enough to place on a workbench, tool box, organizer, or even a soldering station.
$2.95
Turrets - Bifurcated, for use on 2mm boards
Bifurcated turrets for use on boards measuring 2mm thick. Made of nickel plated copper. These are sometimes referred to as split or forked turrets. For use with 3mm boards, see S-HTUR-BI-3S. Stake and anvil required for mounting. Staking Tool is our part number S-T1715. Anvil is our part number S-T1717. For a budget tool set see S-T-STAKE-SET.
$2.30
package of 10
Screw - 6-32 x ⅝”, Phillips, Oval Head, Machine, Nickel-plated
#6-32 x ⅝” Phillips drive machine screws made of nickel plated steel. This style of oval head screw matches the pickup and switch mounting screws found on Fender® guitars with countersunk holes on the pickguard.
$1.45
package of 5
Washer - ⅞" x ⅛" Thick, Rubber, Chassis Mount,
Gum rubber chassis mounting washers as used on thirties vintage Zenith and Philco radio. 1/4 inner dia. Allows proper dial centering in cabinet opening. Adhesive backing for lamenating to other washers to increase thickness. Overall dimensions 7/8" dia. x 1/8" thick.
$0.65
Finishing Washer - #10, Stainless Steel, Countersunk
#10 steel finishing washers. Designed for accommodating the heads of countersunk screws. It provides additional bearing area on the material being fastened and can be used to give a neat, finished appearance. Made of 18-8 stainless steel.
$1.35
package of 10
Capacitor Cover - Fender®, for Reissue Vibroverb
Capacitor cover for Fender ® Reissue Vibroverb. Mounting centers are 5.75" x 3". Measurements are 6.25" x 3.5" x 1.42"
$27.95
Indicator Light - Marshall, Purple Square, LED
Genuine Marshall purple indicator light used in older models such as the Vintage Modern 2266 and 2266C.
$5.50