Amplifier Parts

Rivets - Marshall, Silver, for fastening
Silver rivets for fastening amplifier corners. For use on all Marshalls.
Starting at $8.95
Fuse Set - Fast and Slow Blow, 0.25" x 1.25", 8 types, 20 each
Package of 160
Fuse kit, fast and slow blow. Contains the following fuses:
  • 20x Slo-Blo, 2 Amp F-Z3AG-S2
  • 20x Slo-Blo, 3 Amp F-Z3AG-S3
  • 20x Slo-Blo, 1 Amp F-Z3AG-S1
  • 20x Slo-Blo, 4 Amp F-Z3AG-S4
  • 20x Slo-Blo, 5 Amp F-Z3AG-S5
  • 20x Fast-Blo, 2.5 Amp F-Z3AG-F2D5
  • 20x Fast-Blo, 1 Amp F-Z3AG-F1
  • 20x Fast-Blo, 3 Amp F-Z3AG-F3
$88.95
Handle - Marshall Style, Black Vintage, Silver Ends, Large
Large Marshall style, vintage type large plastic handle with silver ends. Caps sold separately.
$13.12
Fan - 115V, AC ~\frac{50}{60}~ Hz, 1 Phase, low noise
Super low noise 115V-AC. Dimensions are 4 11/16" (height) x 4 11/16" (width) x 1 ½" (depth). The distance between mounting centers is 4 1/8" x 4 1/8".
$29.95
Fan Guard - Metal Grill, Finger Guard
Metal finger-protecting guard for P-HFAN.
$3.50
Tube Stabilizer - Fender®, Hot Rod Series
Replacement foam tube stabilizer for Fender® Hot Rod Deluxe and Hot Rod Deville amps. This foam block slides over the first two preamp tubes. This genuine Fender® replacement is made in the USA.
$9.45
Handle - Ampeg Style, Blue Vintage, White Stitching
Vintage Ampeg style amp handle, center to center measurement is 7 3/8".
See S-H105 for compatible screws and T-nuts.
$17.95
Capacitor Cover - Fender®, for Bassman
Capacitor cover for Fender® Bassman. Mounting center are 5" x 3". Measurements are 5" x 3" x 1 ½".
$36.75
Dial Lamp - #48, T-3-¼, 2.0V, .06A, Screw Base
Package of 10
Package of 10. Long life general replacement lamps for dials, indicators, etc. Size T-3 1/4 Volts 2.0 Amps 0.06 Candle Power 0.04 Filament Shape C-2R Average Life 1,000 Lamp Number 48 Lamp Type Screw
$3.00
Rubber feet - 7/16” Dome Shape, Embedded 6-32 Screw
Dome shaped rubber feet with an embedded 6-32 machine screw. These feet have a 0.4375 inch diameter and have a 0.25 inch screw length. The embedded screw provides a sleek appearance. These are great feet and can also be used as bumpers.
$0.95
Amp Cover - Replacement for Fender® Princeton Reverb
Vintage style using only the finest tolex available.
  • Height: 16"
  • Width: 20.5"
  • Depth: 9"
$32.93
$3.00
Dial Lamp - #45, T-3-¼, 3.2V, .35A, Bayonet Base
Package of 10
Package of 10. Long life general replacement lamps for dials, indicators, etc. Sold in package of 10 bulbs.
$3.00
Vent - Marshall, for top, metal construction
Genuine Marshall™ top metal vent. 16 7/8" x 2 ¼".
$25.95
On Backorder
Amp Cover - Fender®, for 65 Twin Reverb Reissue
Amplifier cover for '65 Twin Reverb Reissue, black
$19.95
Fuse Holder - for Marshall, 3AG Type, PCB Mount
Though-hole PCB mount fuse holder used on many Marshall® JCM2000 series such as the TSL100, TSL122, DSL50, and DSL100 as well as other amps. Check footprint and dimensions for compatibility. This holder fits 3AG fuses and pairs with the S-H212 cap. Cap sold separately.
$6.95
Amp Cover - For Fender '70s Twin Reverbs
Vintage style using only the finest tolex available.
  • Height: 19"
  • Width: 26.5"
  • Depth: 11"
$35.33
Amp Cover - Fender, For Blues Jr., Brown
Protect your investment with a fitted Genuine Fender amplifier cover. Designed to fit your Blues Jr. and Blues Jr III perfectly.
  • Blank brown nylon cover
  • Designed to fit Blues Junior™ and Blues Junior™ III amplifiers (1996-present)
  • Height: 16" (40.64 cm)
  • Width: 18" (45.72 cm)
  • Depth: 9.18" (23.31 cm)
$22.95
Foot - Peavey, Metal Glide, 1.56" x 0.46"
Package of 4
Peavey metal glide feet, set of four with mounting screws included. Allows movement of heavy cabinets along the floor without damaging the cabinet. Rubber inserts cushion the load during transport. 1.56" diameter x 0.46" height (with rubber insert).
$7.95
Amp Cover - For Fender Vintage Silverface Champ
Vintage style using only the finest tolex available.
  • Height: 14"
  • Width: 17"
  • Depth: 7"
$20.35
Amp Cover - Marshall, for Slant 4x12 Cabs (Not 1960TV)
Genuine Marshall cabinet cover. Fits slant 4 X 12 cabinets except the 1960TV.
Height- 30"
Width-30"
Top Depth-11.5"
Bottom Depth-14.5"
$69.95
Panel - aluminum, front, for Super Reverb
Basic front panel for Super Reverb. Material is .032" aluminum.
$19.95
Amp Cover - For Fender 65 Deluxe Reverb
Vintage style using only the finest tolex available.
  • Height: 17"
  • Width: 25"
  • Depth: 9.5"
$24.22
Amp Cover - Marshall, for Most Full Size Marshall Heads
Fits most full-size heads. Does not fit DSL100H. 30" x 11" x 9".
$59.95