Amplifier Parts

Phillips flathead machine screw, 10-32 stainless steel. Fine thread. Designed to go through a hole or nut that is pre-tapped to form a mating thread for the screw. This style head is used in applications where protrusion of the fastener above the mating surface is unacceptable. Phillips drive is the most common drive used and is designed to "camout" when the screw reaches optimum tightness, thus preventing damage to the screw head. Made from austenitic stainless steels. It contains chromium creating an invisible surface film that resists oxidation making the metal corrosion resistant. If the surface layer is damaged, it rebuilds itself in the presence of oxygen.

Bifurcated turrets for use on boards measuring 2mm thick. Made of nickel plated copper. These are sometimes referred to as split or forked turrets. For use with 3mm boards, see S-HTUR-BI-3S. Stake and anvil required for mounting. Staking Tool is our part number S-T1715. Anvil is our part number S-T1717. For a budget tool set see S-T-STAKE-SET.

~1" (25mm) diameter x 1" (25.4mm) high rubber foot / recessed bumper with a steel insert. The 0.217” (5.5mm) mounting hole works well with a variety of screw sizes. Screws sold separately.

Capacitor cover for Fender ® Reissue Vibroverb. Mounting centers are 5.75" x 3". Measurements are 6.25" x 3.5" x 1.42"

Corner made of black plastic with a matte surface. These corners feature ⅜” radius and two mounting holes. These corners are a great option for amplifier cabinets and other equipment.

Screw - Machine, Phillips Flat Head, 10-32 x 1 in., Stainless, package of 5
Nut - T-Nut, Zinc, 10-32, package of 5
Hardware only. Amp handle not included.

Long life general replacement lamps for dials, indicators, etc. Sold in packages of 10.

New-old-stock Soviet pilot lights that fit screw base bulbs. These lights have a unique bakelite frame and bakelite bezel. The lights come with a 6.3V bulb but can be used with any G-3-½ screw base bulb. The diameter of the light is 0.785” and the diameter of the mounting hole is 0.625”. Includes a bakelite mounting nut. Note: A small 0.2” notch must either be filed into the 0.625” mounting hole or filed off of the light to flush mount with a panel.

Thumb screws for piggyback amplifier, used for locking amp heads to cabs. Original Fender.

8-32 x ½” Phillips round head machine screws made of solid brass. These brass round head screws visually match the screws found on vintage Marshall amplifiers. They are a great choice for restoration or replica builds. The 8-32 x ½” size works in place of original M4.5 screws that were used for mounting the power and output transformers. These will also work well in many other types of projects. Brass round head screws are available in the following sizes: Diameter/TPI SKU 4-40 S-HSB4-X 6-32 S-HSB6-X 8-32 S-HSB8-12 Pairs with S-HBNX brass nuts and S-HLWX-B lock washers. S-HBWX flat washers are also available.

P-H261 with mounting hardware Includes:

• (1) P-H261
• (1) S-HS1032-1F
• (1) S-HTN1032

#10 steel finishing washers. Designed for accommodating the heads of countersunk screws. It provides additional bearing area on the material being fastened and can be used to give a neat, finished appearance. Made of 18-8 stainless steel.

Two inch wide sticker featuring the 4-band resistor color code chart. This sticker is a great reference when checking resistor values using the color codes. It is easy to read but small enough to place on a workbench, tool box, organizer, or even a soldering station.

Long life general replacement lamps for dials, indicators, etc. Sold in packages of 10.

Long life general replacement lamps for dials, indicators, etc. Very commonly found in RCA radios.

#3 x ⅜” Phillips drive wood screws made of nickel plated steel. This style of round head screw is commonly used to secure Kluson and Kluson style tuners as well as string trees on Fender® guitars.

Round metal handle with 3.5" mounting centers and 1.5" height. These handles are great for amplifiers, rackmount gear, and guitar pedals. Mounting screws and lock washers are included. Features

• Made of round steel
• 2 Screws - Panhead 8-32 x 1/2"
• 2 Internal Tooth Lockwashers

Metal grills have flat black finish with rubber edge trim. Mounting brackets P-HSGA1 are sold separately. Multiple sizes available.

Ampeg-style strap handle. Black. Center to center measurement is 6". Can be used on other amplifiers.

Danger high voltage label for amplifiers and other equipment. These stickers are a great option for labeling equipment and builds as high voltage whenever necessary. The sticker is a single piece that must be cut to size using scissors or a paper cutter to make a total of four labels. This style of label is perfect for smaller areas like circuit boards, components, heatsinks and other areas inside the chassis.

1" stainless steel Phillips head, flat top screw.

#6 x 1” slotted drive wood screws made of nickel plated steel. This style of oval head screw is commonly used on early Fender® tweed amps to secure the back panels. They are also the same type used for securing strap buttons as well as for mounting the bridge plate on early Telecaster® guitars including the Nocaster® and Esquire® guitars.

Gold rivets for fastening amplifier corners. For use on all Marshalls.

Revive the look of your vintage-style or modern Fender amp with a genuine Fender amplifier logo.

• Genuine Fender® flat black amplifier logo
• Mounting screws included
• Designed for Bassman® series, Super-Sonic™ series and Vibro-King® series amplifiers plus others

Measurements:

• Bottom Horizontal Mounting Holes Center-To-Center : 4.14” (150.1mm)
• Top Horizontal Mounting Holes Center-To-Center : 3.18” (81.9mm)
• Vertical Mounting Holes On “F” Center-To-Center : 1.98” (50.4mm)
• Vertical Mounting Holes On “R” Center-To-Center : .98” (24.9mm)