Amplifier Parts

This handle has a flexible molded black grip with two rugged die-cast mounts. There are two holes per mount for use with M4 screws. See specifications below for dimensions.

Vintage style phenolic turret boards with a 3mm thickness. The phenolic material matches the appearance and construction of those used in classic amplifiers from Marshall and others. These boards are made of the highest grade phenolic material and are rated for high voltage applications. They have a high mechanical strength in addition to their high dielectric strength making them the perfect candidate for turret board based tube amplifiers.
This 216 hole version has 8 rows and 27 columns. This size can be found in vintage Marshall amps such as various revisions of the JTM45 and 50W JMP amps.
Complete the vintage turret board look with S-HTUR-PR-BI-3S turrets.

Tweed style hand mounting bracket hardware for P-H262, P-H263, P-H315, and P-H282 amp handles. Sold individually. Screws not included. Multiple color options available.

Fender® style lamp jewels are used on countless amps from all kinds of manufacturers. Threading: 9/16 - 27. Note: When back-lit, the color of the amp jewels will be affected by the color of the bulb behind it.

Flush finishing washers made of nickel plated brass. Designed for accommodating the heads of countersunk screws. These washers provide additional bearing area on the material being fastened and can be used to give a neat, finished appearance. This design closely resembles the flush finishing washers found on earlier blackface Fender® amplifier cabinets. The #6 size is used for back panels on combo amps and heads. The #8 is used for extension cabinet back panels. For the later flanged style finishing washers used on these amps, see S-HXFW-2N.

Black plastic handle with nickel end caps. Screws are not included.

Peavey cap for fuse holder. 1 1/16" length x 3/8" diameter. Top slotted for flat head screwdriver.

Round steel handle with 4" mounting hole center. 1.3" tall. Hardware included.

Bifurcated turrets for use on boards measuring 3mm thick. Made of nickel plated copper. These are sometimes referred to as split or forked turrets. For use with 2mm boards, see S-HTUR-BI-2S. Stake and anvil required for mounting. Staking Tool is our part number S-T1715. Anvil is our part number S-T1717. For a budget tool set see S-T-STAKE-SET.

Original Marshall™ Sprung feet. Screws are included.

Metal grills have flat black finish with rubber edge trim. Mounting brackets P-HSGA1 are sold separately. Multiple sizes available.

Lens Diameter: 3 mm Overall Height: 5.4 mm Lens Type: Diffused Multiple color options available.

Panel mount 3AG fuse holder with spade lug connectors. This fuse holder matches the style of vintage tweed amps and is a great replacement for original amps or new builds. Mounting nut and rubber washer included.
Note: The spade lugs have a detent rather than a hole.

P-H261 with mounting hardware Includes:

• (1) P-H261
• (1) S-HS1032-1F
• (1) S-HTN1032

High quality snap-in IEC C14 power entry connector. The connector is easy to install and is rated for 250VAC at 15A. The quick disconnect terminals can also be directly soldered to. Features:

• High quality thermoplastic housing
• Copper alloy terminals (4.8mm width)
• Quick installation
• Fits 0.8mm to 2mm thick panels

Corner wraps around inside edge of cabinet. Works on 3/4" of wood + material thickness. Countersunk mount holes, 20 gauge, 1/2" radius. Sold individually. See S-H102 for mounting hardware.

Vintage style using only the finest tolex available.

• Height: 14"
• Width: 17"
• Depth: 7"

Self tapping Phillips panhead machine screw #8, zinc type AB. Type AB screws tap their own mating internal thread. They require a preformed hole for installation into metallic materials but not necessary for wood or plastic materials. Combines locating point of Type A with thread size and pitch of Type B. Normal limitations of Type B apply. Has a general purpose bearing area and can be substituted in most applications for round, truss, or binding heads. Provides good control in driving and is the most recommended drive.

Tube Amp Doctor has created an exact replica of the vents used on Vox® amps and the Marshall® Super PA. These high quality brass ventilation grills are hand crafted. Measures 0.720" x 4.805".

6-32 Phillips round head machine screws made of solid brass. These brass round head screws visually match the screws found on vintage Marshall amplifiers. They are a great choice for restoration or replica builds. The 6-32 size works in place of original M3.5 screws that were used for the rotary selector switches, octal sockets, capacitor clamps, and chokes. These will also work well in many other types of projects. Brass round head screws are available in the following sizes: Diameter/TPI SKU 4-40 S-HSB4-X 6-32 S-HSB6-X 8-32 S-HSB8-12 Pairs with S-HBNX brass nuts and S-HLWX-B lock washers. S-HBWX flat washers are also available.

Replacement handle for vintage ampeg amps. Will work on other amplifiers as well. Center to center measurement is 6".

Indicator light, square. 120 Volts. Measures: 0.47" Length x 0.47" Width x 0.09" Depth (3/8" mounting hole)

Protect your expensive investment or hobby with inexpensive fuses. Time-delay, low breaking capacity. Rated at 250V. Package of 5

Steel lock washers that use both internal and external teeth for locking and tension. The teeth dig into the screw head or nut and the joint. These washers provide greater vibration resistance than split lock washers. Steel lock washers like these can be found in vintage Fender® blackface and silverface amplifiers for securing speakers to the cabinet. These washers have a zinc finish.