Amplifier Parts

Fuse Holder - 3AG-Type, High Quality
High quality fuse holder used with 3AG type fuse. Fits in a 1/2" diameter chassis hole. Frame and cap material: phenolic Terminal material: Nickel-plated brass Mounted by nut
$2.06
Foot - Rubber, .875" x .53", with Metal Washer
7/8" diameter x 17/32" high with metal washer. Sold individually.
$0.55
Handle Mount - for slotted Strap Handles
Colors Available:
Hardware for P-H262, P-H263, P-H315, and P-H282 amp handles. Sold individually. Screws not included. Multiple color options available. See S-H105 for compatible screws and T-nuts.
Starting at $1.39
Corner - Steel, 2-Hole, 18 Gauge, Nickel
Use where total material thickness is 1/2" or more. Works on carpet or vinyl, 18 gauge steel, 1/2" radius. Radius is.50" from the center hole to furthermost edge. Sold individually. See S-H101 for mounting hardware.
$1.00
Dial Lamp - Front Panel Indicator Light, Relampable
Lamp holder. Relampable front panel indicators accept a variety of T-2 and T-3 ¼ miniature bayonet lamps.
  • 11/16" chassis hole
  • Total Length = 1.755" (solder lugs included in measurement) (extends about 1.68" from front of panel to end of solder lugs)
  • Rating: 125V, 75W
  • Threading: 9/16 - 24

Available Jewels Amber P-L117 Blue P-L120 Clear P-L122 Green P-L116 Purple P-L121 Red P-L115 Violet P-L121V White P-L123
$4.25
Corner - Steel, 2-Hole, 18 Gauge, ¾" Thickness
Steel, 2-Hole corner. Replacement for Fender® Corner wraps around inside edge of cabinet. See S-H101 for mounting hardware.
  • Works on ¾" of wood + material thickness
  • 18 gauge steel
  • ½" radius
  • For Fender®
  • Sold individually.
$1.00
Dial Lamp - LED version, #47 or #44, T-3-¼, 6.3V, Bayonet Base
Colors Available:
LED version of the general replacement lamps for dials, indicators, etc. Used as the pilot light on the vast majority of Fender amps and many others as well. This LED version can be used to replace either #44 or #47 bulbs (see P-44 and P-47 for incandescent versions). The color options for this LED bulb can be combined with colored jewels to create new and interesting color options! The opaque shell on these LED bulbs provides a clean diffused glow.
$1.35
Nut - Kep, Hex nut with external tooth, coarse thread, zinc
Package of 10
Popular low-cost lock nut (also known as a Keps nut, k-lock, or washer nut) for commercial and industrial applications. Locking action is achieved when the nut is tightened against a bearing surface as the teeth of the lock washer dig into it.
$1.00
Chassis Strap - generic, for mounting amplifier
Generic amplifier chassis straps. Mounting hardware sold separately. Sold individually.
Starting at $2.05
Corner - Black steel, 2-Hole, 18 Gauge, Notched
2-leg notched, black, wraparound. 18 gauge steel, ½" radius. Sold individually.
$1.19
On Backorder
Corner - 2-Hole, 20 Gauge, for cabinets
Corner wraps around inside edge of cabinet. Works on 3/4" of wood + material thickness. Countersunk mount holes, 20 gauge, 1/2" radius. Sold individually. See S-H102 for mounting hardware.
$1.00
Washer - Internal Tooth Lock, spring steel
Package of 5
Spring steel tooth-lock washer. Uses internal teeth for locking and tension.
Starting at $0.45
Fuse - Slow-Blow, 250V, Miniature, 5mm x 20mm
Package of 5
Protect your expensive investment or hobby with inexpensive fuses. Time-delay, low breaking capacity. Rated at 250V. Package of 5
$3.50
Caster - Swivel, 2" wheel, Fender Replacement
Heavy duty swivel caster for use on Fender and other amps. Each 2" diameter wheel supports 45.359Kg / 100Lb.
Starting at $1.95
Handle - Fender Style, Black strap with metal caps
Cap Colors Available:
Replacement handle for Fender® and other amps (8.25" from mounting center to mounter center).
Starting at $2.95
Fuse - Slow-Blow, 250V, 3AG, 0.25" x 1.25"
Package of 5
The 3AG Slo-Blo fuse solves a broad range of application requirements while offering reliable performance and costeffective circuit protection. Fits fuse block S-H259 and fuse holder S-H201.
$3.25
Corner - Black Steel, 2-Hole, 18 Gauge, Wraparound, Lip
2-leg black, wraparound with lip. 18 gauge steel, ½" radius. Sold individually.
$1.19
LED Bezel - with included 5mm Red LED
5 mm diameter Red LED with holder. Perfect for amps and effects. Mounts in a 5/16" diameter chassis hole.
$1.05
Screw - 4-40, Phillips, Pan Head, Machine, Zinc
Package of 5
Phillips panhead machine screw, 4-40, zinc. Designed to go through a hole or nut that is pre-tapped to form a mating thread for the screw. Has a general purpose bearing area and can be substituted in most applications for round, truss, or binding heads. Phillips drive is the most common drive used and is designed to "camout" when the screw reaches optimum tightness, thus preventing damage to the screw head.
Starting at $0.35
Foot - Chrome Glides, ~\frac{15}{16}~" diameter
Package of 4
Chrome glides in package of 4. Diameter: 15/16" Includes 7/8" wood screws
$3.50
Logo - Marshall, white script, replacement for amplifiers
Original white Marshall™ logo for use on Marshall amplifiers.
Starting at $17.95
Screw - 8-32, Phillips, Pan Head, Machine, Zinc
Package of 5
Phillips panhead machine screw, 8-32, zinc. Phillips panhead machine screw, 4-40, zinc. Designed to go through a hole or nut that is pre-tapped to form a mating thread for the screw. Has a general purpose bearing area and can be substituted in most applications for round, truss, or binding heads. Phillips drive is the most common drive used and is designed to "camout" when the screw reaches optimum tightness, thus preventing damage to the screw head.
Starting at $0.75
Handle - Fender Style, Strap, 6.375” Spacing
Colors Available:
Replacement handle for tweed style Fender® amps (6.375" from mounting center to mounter center)
$9.05
LED Bezel - for 3mm LED, used for mounting
Holder for mounting LEDs to panels.
$0.65