Amplifier Parts

LED - 5mm diameter, diffused lens, 5 mCd
Package of 5
Colors Available:
5mm (T-1 ¾) diffused LED’s. Great for use in pedal builds and other applications where a tinted and diffused indicator is needed. Multiple colors available.
  • 5mm size
  • Tinted and diffused
  • Multiple colors available
  • Package of 5
$0.70
Optocoupler - Xvive, Vactrol, VTL5C Series
High quality vactrols from Xvive. The Xvive vactrols are clones of the original Excelitas / Perkins-Elmer vactrols used in man effects pedals, synthesizers, compressors and other equipment. These vactrols feature a thick epoxy sealed casing. The VTL5C3 and VTL5C3/2 both have a steep slope, good dynamic range, a very low temperature coefficient of resistance, and a small light history memory.
Starting at $5.50
Dial Lamp - LED version, #47 or #44, T-3-¼, 6.3V, Bayonet Base
Colors Available:
LED version of the general replacement lamps for dials, indicators, etc. Used as the pilot light on the vast majority of Fender amps and many others as well. This LED version can be used to replace either #44 or #47 bulbs (see P-44 and P-47 for incandescent versions). The color options for this LED bulb can be combined with colored jewels to create new and interesting color options! The opaque shell on these LED bulbs provides a clean diffused glow.
$1.35
Covers - for Chassis Socket Hole, Steel
Steel plates for covering unused socket holes on modified chassis. These covers provide a safe solution for modifying any chassis. These covers use elongated mounting holes to fit a variety of socket hole sizes. P-ST9-CVR
  • 9 pin (noval) socket hole cover
  • 5mm x 3.5mm mounting holes
  • 27.1mm center to center

P-ST8-CVR
  • 8 pin (octal) socket hole cover
  • 6.5mm x 3.5mm mounting holes
  • 40mm center to center

P-ST8-ST9-CNVRT
  • 8 pin to 9 pin (octal to noval) socket adapter
  • Bottom mount 9 pin socket recommended
$2.75
Handle - Fender Style, Strap, 6.375” Spacing
Colors Available:
New!:
Replacement handle for tweed style Fender® amps (6.375" from mounting center to mounter center)
$9.05
Dial Lamp - Fender Style, Premium Pilot Assembly
Lamp holder. Relampable front panel indicators accept a variety of T-2 and T-3 ¼ miniature bayonet lamps.
  • 11/16" chassis hole
  • Total Length = 1.755" (solder lugs included in measurement) (extends about 1.68" from front of panel to end of solder lugs)
  • Rating: 125V, 75W
  • Threading: 9/16 - 24

Available Jewels Amber P-L117 Blue P-L120 Clear P-L122 Green P-L116 Purple P-L121 Red P-L115 Violet P-L121V White P-L123
$3.85
Corner - Steel, 3-Hole, 20 Gauge, for cabinets
11mm / 7/16" Radius, 20 Gauge Steel (Sold individually)
$1.00
Corner - Marshall, Black Plastic, 3-Hole, with rivets
Package of 4
Front corner set, 3/4" radius. Includes gold rivets. Sold in package of 4
$6.75
Foot - Rubber, 1.5" diameter x 1.9" tall, with metal washer
1 ½" diameter x 1 3/16" high with metal washer. Sold individually.
$1.25
Nut - T-Nut, Zinc, for fastening metal to wood or plastic
Package of 5
Zinc t-nut. Used for fastening metal to products made of wood, particle board or plastic. Low carbon steel. Package of 5. Multiple sizes available.
Starting at $1.15
Corner - Marshall, Black Plastic, 3-Hole, Single Corner
Three hole genuine Marshall corners most often used on fronts of heads and cabinets. These corners are sold individually. Mounting rivets sold separately.
For sets of four with uncluded rivets, see P-H1091.
$0.95
Handle - Case, Fender style, 4.5" center to center
Colors Available:
For Fender and other cases. 4 1/2" center to center.
Starting at $4.59
Fuse - Slow-Blow, 250V, 3AG, 0.25" x 1.25"
Package of 5
The 3AG Slo-Blo fuse solves a broad range of application requirements while offering reliable performance and costeffective circuit protection. Fits fuse block S-H259 and fuse holder S-H201.
$3.25
Handle - Ampeg Style, White Stitching
Colors Available:
Vintage Ampeg style amp handle with white stitching. Multiple color options available. See S-H105 for compatible screws and T-nuts.
Starting at $10.98
Fuse Holder - 3AG-Type, High Quality
High quality fuse holder used with 3AG type fuse. Fits in a 1/2" diameter chassis hole. Frame and cap material: phenolic Terminal material: Nickel-plated brass Mounted by nut
$2.06
LED - 3mm, Water Clear, High Brightness, Package of 5
Package of 5
Colors Available:
High brightness 3mm LED. Great for use in pedal builds and other applications where a bold, bright, indicator is needed. Multiple colors available.
  • 3mm size
  • Water clear
  • High brightness
  • Multiple colors available
  • Package of 5
Starting at $1.30
Handle - Fender Style, Black strap with metal caps
Cap Colors Available:
Replacement handle for Fender® and other amps (8.25" from mounting center to mounter center).
Starting at $2.95
Amp Cover - Marshall, for Slant 4x12 Cabs (Not 1960TV)
Genuine Marshall cabinet cover. Fits slant 4 X 12 cabinets except the 1960TV.
Height- 30"
Width-30"
Top Depth-11.5"
Bottom Depth-14.5"
$59.95
Dial Lamp - #50, G-3-½, 7.5V, .22A, Screw Base
Package of 10
Package of 10. Long life general replacement lamps for dials, indicators, etc.
$3.00
Indicator Light - Marshall, Red Square, 6V
Indicator light, square. 6 Volts. Measures: 0.44" Length x 0.44" Width x 0.27" Depth
$5.90
Logo - Fender, plate, for Tweed amplifier
Revive the look of your vintage-style or modern Fender amp with a genuine Fender amplifier logo.
  • Genuine Fender® tweed amp logo
  • Mounting pins included
  • Designed for
    • Pro Junior™
    • Blues Junior™
    • JazzMaster™ Ultralight
    • plus others

Fender part number: 099-409-6000
$18.95
Corner - Black steel, 2-Hole, 18 Gauge, Notched
2-leg notched, black, wraparound. 18 gauge steel, ½" radius. Sold individually.
$1.19
Foot - Rubber, 1.5" diameter x 1" tall, with metal washer
Rubber foot measuring 1 ½" diameter X 1" height with metal washer.
$1.00
Logo - Marshall, Gold Script on white plastic, 6"
Original Marshall™ mini logo.
  • Fits 1959HW, Bluesbreaker model 1962 and others.
  • Gold lettering on white plastic
  • 6” (40 x 150 mm)

Not for resale. For repair or replacement only.
$19.95