Amplifier Parts

Corner - Marshall Style, Satin Black Plastic, 4-Hole, Rear
Marshall style back corner made of black plastic with a satin surface. These corners feature ¾" radius for the outer edge and a 90° angle for the flat back edge. These corners are a great option for amplifier cabinets and other equipment. Similar to the genuine Marshall back corners P-H1090.
$1.09
Corner - Marshall Style, Textured Black Plastic, 4-Hole, Rear
Marshall style back corner made of black plastic with a textured surface. These corners feature ¾" radius for the outer edge and a 90° angle for the flat back edge. These corners are a great option for amplifier cabinets and other equipment. Similar to the genuine Marshall back corners P-H1090.
$1.09
Corner - Matte Black Plastic, 2-Hole, ⅜” Radius
Corner made of black plastic with a matte surface. These corners feature ⅜” radius and two mounting holes. These corners are a great option for amplifier cabinets and other equipment.
$1.09
Corner - Marshall Style, Satin Black Plastic, 3-Hole
Marshall style front corner made of black plastic with a satin surface. These corners feature ¾" radius and three mounting holes. These corners can be used on both straight and slanted cabinets. These corners are a great option for amplifier cabinets and other equipment.
Similar to the genuine Marshall front corners P-H1091.
$1.09
Corner - Gloss Black Plastic, 3-Hole, ½” Radius
Corner made of black plastic with a glossy surface. These corners feature ½” radius and three mounting holes. These corners are a great option for amplifier cabinets and other equipment.
$1.09
Corner - Matte Black Plastic, 2-Hole, 7/32” Radius
Corner made of black plastic with a matte surface. These corners feature 7/32” radius and two mounting holes. This radius can also work on ¼” radius edges with a very small gap. These corners are a great option for amplifier cabinets and other equipment.
$1.09
Corner - Marshall Style, Textured Black Plastic, 3-Hole
Marshall style front corner made of black plastic with a textured surface. These corners feature ¾" radius and three mounting holes. These corners can be used on both straight and slanted cabinets. These corners are a great option for amplifier cabinets and other equipment.
Similar to the genuine Marshall front corners P-H1091.
$1.09
Corners - Fender, for amplifier, Steel, 3-Hole with hardware
Pure Vintage 3-screw mount amplifier corners
  • Set of four nickel-plated replacement amplifier corners for effective amplifier protection
  • Includes 12 mounting screws
  • Used on Cyber-Champ, Stage™ 100/112SE, Ultimate™ Chorus, Princeton® 65 DSP/650, GE-112, Tone Master™ enclosures, Vibro-King® 212, Deluxe™ 90 DSP/900, Acoustasonic™ SFX II, Stage™ 1000/1600, Super-Sonic™ enclosures, Bassman® enclosures, Acoustasonic Ultralight enclosures, Rumble™ enclosures, Band-Master® VM enclosures and Cyber-Twin® amplifiers
$8.45
package of 4
Screw - 1", Flat top Phillips, Stainless Steel
1" stainless steel Phillips head, flat top screw.
$1.45
package of 4
Screw - #6 x ¾", Flat Head, Stainless Steel
Stainless steel flat head Phillips self-tapping screws. #6 x 3/4" length. Good for use with P-H266 & P-H267 & P-H1087N.
$2.89
package of 8
Corner - Steel, 3-Hole, 18 Gauge, for vinyl/carpeted cabinets
Industry standard 3-leg back side corner cover for vinyl or carpet covered cabinets. 18 gauge steel, 1/2" radius. Sold individually. See S-H101 for mounting hardware.
$1.09
Corner - Steel, 3-Hole, 20 Gauge, for cabinets
11mm / 7/16" Radius, 20 Gauge Steel (Sold individually)
$1.19
Corner - Steel, 2-Hole, 18 Gauge, ¾" Thickness
Steel, 2-Hole corner. Replacement for Fender® Corner wraps around inside edge of cabinet. See S-H101 for mounting hardware.
  • Works on ¾" of wood + material thickness
  • 18 gauge steel
  • 12mm / ½" radius
  • For Fender®
  • Sold individually.
$1.08
Corner - Black Plastic, 4-Hole, Replacement for Vox / Orange
These Tube Amp Doctor black plastic corners are great replacements for certain Vox® amps from 1966 to 2004 and Orange® amps and cabinets that feature this type. The two larger holes are for use with screws while the small holes are intended for pins/nails just like the originals.
$1.35
Corner - Marshall, Black Plastic, 4-Hole, Rear, with rivets
Marshall back corners with gold rivets. 3/4" radius.
For similar generic back corners, see P-H3080.
$6.95
package of 4
Wood Tack - Screw Nail, Steel, 20mm
Steel 20mm screw nails for corners, logos, badges, and more. These screw nails make adding cabinet accessories easy requiring only a mallet for installation. The design is great for speaker cabinets ensuring a better grip than standard nails and tacks under extreme vibrations.
$0.35
Corner - Peavey, Black Steel, 2-Hole, Lip
Black metal, 2 hole with lip, radius ½". Sold individually.
$1.50
Corner - Black Steel, 2-Hole, 18 Gauge, Wraparound, Lip
2-leg black, wraparound with lip. 18 gauge steel, ½" radius. Sold individually.
$1.65
Corner - Black Plastic, 4-Hole, Heavy Duty, Chevron
Heavy duty plastic, stacking chevron corner. Ideal for carpet covered cabinets. See S-H102 for mounting hardware.
Starting at $1.15
Corners - Fender, for amplifier, Nickel, 2-Hole with hardware
Pure Vintage 2-screw mount amplifier, package of 4, screws included.
  • Set of four nickel-plated replacement amplifier corners for effective amplifier protection
  • Includes eight mounting screws
  • Introduced on Blonde, Brown, and Blackface™-era amplifiers
  • Used on Cyber-Champ, Stage™ 100/160/112 SE, Ultimate™ Chorus, Princeton® 65 DSP/650, GE-112 Enclosure, Tone Master® enclosure, Vibro-King® 212 enclosure, '94 Twin, Acoustasonic™ Jr. DSP, Deluxe™ 90 DSP/900, Cyber-Twin®/Cyber-Twin SE, Concert, '65 Super Reverb®, Bullet® 15 DSP, Acoustasonic SFX II, Stage 1000/1600, '65 Twin Custom® 15, Steel King™, Princeton® Recording Amp and Super-Sonic™ series amplifiers
$8.45
package of 4
Screw - #6 x ¾", Pan Head, Stainless Steel
Stainless steel pan head Phillips self-tapping screws. #6 X ¾" length. Good for use with #'s 3,4 and 5.
$4.35
package of 12
Rivets - Marshall, Gold, for fastening
Gold rivets for fastening amplifier corners. For use on all Marshalls.
Starting at $8.95
Corner - Steel, 2-Hole, 18 Gauge, Nickel
Use where total material thickness is 1/2" or more. Works on carpet or vinyl, 18 gauge steel, 1/2" radius. Radius is.50" from the center hole to furthermost edge. Sold individually. See S-H101 for mounting hardware.
$1.09
Rivets - Marshall, Silver, for fastening
Silver rivets for fastening amplifier corners. For use on all Marshalls.
Starting at $8.95