Optocoupler - Xvive, Vactrol, VTL5C Series
High quality vactrols from Xvive. The Xvive vactrols are clones of the original Excelitas / Perkins-Elmer vactrols used in man effects pedals, synthesizers, compressors and other equipment. These vactrols feature a thick epoxy sealed casing. The VTL5C3 and VTL5C3/2 both have a steep slope, good dynamic range, a very low temperature coefficient of resistance, and a small light history memory.
Starting at $5.50
Dial Lamp - LED version, #47 or #44, T-3-¼, 6.3V, Bayonet BaseLED version of the general replacement lamps for dials, indicators, etc. Used as the pilot light on the vast majority of Fender amps and many others as well. This LED version can be used to replace either #44 or #47 bulbs (see P-44 and P-47 for incandescent versions). The color options for this LED bulb can be combined with colored jewels to create new and interesting color options! The opaque shell on these LED bulbs provides a clean diffused glow.
Covers - for Chassis Socket Hole, Steel
Steel plates for covering unused socket holes on modified chassis. These covers provide a safe solution for modifying any chassis. These covers use elongated mounting holes to fit a variety of socket hole sizes. P-ST9-CVR
- 9 pin (noval) socket hole cover
- 5mm x 3.5mm mounting holes
- 27.1mm center to center
- 8 pin (octal) socket hole cover
- 6.5mm x 3.5mm mounting holes
- 40mm center to center
- 8 pin to 9 pin (octal to noval) socket adapter
- Bottom mount 9 pin socket recommended
Handle - Fender Style, Strap, 6.375” SpacingReplacement handle for tweed style Fender® amps (6.375" from mounting center to mounter center)
Nut - Kep, Hex nut with external tooth, coarse thread, zinc
Package of 10Popular low-cost lock nut (also known as a Keps nut, k-lock, or washer nut) for commercial and industrial applications. Locking action is achieved when the nut is tightened against a bearing surface as the teeth of the lock washer dig into it.
Dial Lamp - #48, T-3-¼, 2.0V, .06A, Screw Base
Package of 10Package of 10. Long life general replacement lamps for dials, indicators, etc. Size T-3 1/4 Volts 2.0 Amps 0.06 Candle Power 0.04 Filament Shape C-2R Average Life 1,000 Lamp Number 48 Lamp Type Screw
Dial Lamp - #81, G-6, 6.5V, 1.02A, Bayonet Base
Long life general replacement lamps for dials, indicators, etc. Sold individually.
Relay - Fender®, DPDT, 24 V, replacement
Original Fender®, DPDT, 24V, used in Blues Deluxe®, Blues Deville®, Hot Rod Deluxe®, Hot Rod Deville®.
Piggyback Hardware - Fender, Clip Bars
Package of 2Pure Vintage Piggyback Clip Bars
- Set of two chrome-plated clip bars used to mount "piggyback"-style amplifier heads to amplifier cabinets
- Includes all mounting hardware, including tee nuts, ribbon springs and mounting screws
- Introduced on Blonde and Blackface™ era amplifiers
- Used on Tone-Master® 212, Super-Sonic™ 212 and Super-Sonic 60 speaker enclosures
Fuse Cap - PCB Mounting, Universal, GMA
PCB Mount Fuse Cap.
- 1.31” x 0.42”
- Takes GMA sized fuse
Chassis Strap - Fender, vintage amplifier
Package of 2Multiple sizes available to fit any amplifier. Contains two straps and mounting hardware. Original Fender packaging.
Starting at $8.75
Speaker Grill - Flat Black, metal with rubber trim
Metal grills have flat black finish with rubber edge trim. Mounting brackets P-HSGA1 are sold separately. Multiple sizes available.
Starting at $6.25
Handle - Marshall Style, Black Vintage, Silver Ends, Large
Large Marshall style, vintage type large plastic handle with silver ends. Caps sold separately.
Receptacle - AC, Mates with S-W123 & S-W124 with Fuse Holder
I.E.C. Power Cord Receptacle. Mates with power cords S-W123 and S-W124. Rated for 6A, 250V. UL listed. Compatible with GMA fuses
Corner - Steel, 3-Hole, 20 Gauge, for cabinets
11mm / 7/16" Radius, 20 Gauge Steel (Sold individually)
Foot - Rubber, 1" height x 1" diameter
Package of 41" diameter x 1" tall rubber foot with 0.15" mounting hole diameter for #6 screws. Screws not included. Package of 4.
Amp Cover - For Fender 65 Deluxe Reverb
Vintage style using only the finest tolex available.
- Height: 17"
- Width: 25"
- Depth: 9.5"
Faceplate - Marshall, 1960 Vintage plate
Original Marshall™ 1960 Vintage plate
Not for resale. For repair or replacement only.
- Fits 1960AV and 1960BV cabinets
- Black on gold
- 29 x 85mm
- Adhesive backing
Not for resale. For repair or replacement only.
Washer - ⅞" x ⅛" Thick, Rubber, Chassis Mount,
Gum rubber chassis mounting washers as used on thirties vintage Zenith and Philco radio. 1/4 inner dia. Allows proper dial centering in cabinet opening. Adhesive backing for lamenating to other washers to increase thickness. Overall dimensions 7/8" dia. x 1/8" thick.
Corner - Steel, 3-Hole, 18 Gauge, for vinyl/carpeted cabinets
Industry standard 3-leg back side corner cover for vinyl or carpet covered cabinets. 18 gauge steel, 1/2" radius. Sold individually. See S-H101 for mounting hardware.
Capacitor Cover - Fender®, for Reissue Vibroverb
Capacitor cover for Fender ® Reissue Vibroverb. Mounting centers are 5.75" x 3". Measurements are 6.25" x 3.5" x 1.42"
Nut - Hex finished, fine thread, zinc
Package of 5Zinc nut. Designed to be used with any low carbon bolt or screw such as a grade 2 bolt. Most commonly used nut. Achieves strength through cold forming. Low carbon steel.
LED - 3mm, Water Clear, High Brightness, Package of 5High brightness 3mm LED. Great for use in pedal builds and other applications where a bold, bright, indicator is needed. Multiple colors available.
Package of 5
- 3mm size
- Water clear
- High brightness
- Multiple colors available
- Package of 5
Starting at $1.30
Corner - Black Plastic, 4-Hole, Heavy Duty, Chevron
Heavy duty plastic, stacking chevron corner. Ideal for carpet covered cabinets. See S-H102 for mounting hardware.
Starting at $0.95