Item Unavailable

Sorry! You're trying to check out one of our items which is no longer available. Why not check out one of these alternate options?
M-PAS-SPower Supply - Godlyke, 9V, 2000mA, Power-All System
The PA-9 Power-All is the world's first 2000 mA, single outlet power supply designed specifically for guitar effect users. Don't waste money on batteries or take up valuable space with multiple "wall wart" adaptors or power bricks - the Power-All system can power your entire pedalboard from a single power supply that takes up only one outlet!
The Power-All's special circuit design offers the lowest noise floor of any digital power supply on the market. The PA-9S now comes with a ferrite-core filter built onto its output cable to further reduce noise and hum.
$19.95
Click to read more about this product.
M-PAS-CABLE-5Cable - For Power All Systems, C-GN/R
Included in the Power-All system and also sold separately, the Cable-Green Right Angle jumper allows the user to power Line-6 Stomp-Box modelers and other digital effect units from the PA-9. The Cable-Green features a reverse-polarity (tip positive), right-angle male barrel connector with a larger, 2.5 mm internal diameter and spring-loaded clips.
The Cable-Green/R can be used with Line-6 Modelers, Electro-Harmonix units, and other pedals requiring a larger internal diameter plug.
$3.00
Click to read more about this product.
M-PAS-CABLE-1Cable - For Power All Systems, C-5/R
Right Angle Daisy Chain connector with standard polarity tip negative/barrel positive plugs connects the PA-9 Power-All to five effect pedals. The Cable-5/R can also be used with Power-All jumper cables to power effects that use different style jacks (reverse polarity, phone plug, battery clip, etc.).
You can also link multiple Cable-5/R connectors to power over twenty 9-volt effect pedals or similar devices (actual number of units depends on current draw of individual units used).
Plugs: (5): Diameter 5.5 mm external, 2.1 mm internal. Barrel length: 10 mm. Spring-loaded right-angle male plugs prevent accidental disconnection from power source or pedal.
Cable length: 1397 mm (55”) total, 270 mm (10.5") between jacks.
Whether you’re using our Power-All digital Power Supply or another manufacturers’ multi-output power brick, Power-All cables are the best way to assure that your pedals are getting the power they need - when and where they need it.
$7.50
Click to read more about this product.
M-PAS-CABLE-4Cable - For Power All Systems, C-BL/R
Included in the Power-All System and also sold separately, the Cable-Blue/R features a right-angle jack that allows users to power effect units that use a 1/8" (3.5 MM) phone plug connector with tip-positive polarity. The Cable-Blue/R can be connected to any male jack on the Cable-5 Daisy Chain, or directly to the PA-9 itself.
Note: to achieve tip-negative polarity from the Cable-Blue/R, simply attach a Cable-Red (M-PAS-CABLE-7) in between it and the power source.
Plug: Right-Angle Configuration with 3.5 mm (1/8") W x 15 mm L Phone plug.
Length: 130 mm (approximately 5.25 inches) between plugs
Whether you’re using the Power-All digital Power Supply or another manufacturers’ multi-output power brick, Power-All cables are the best way to assure that your pedals are getting the power they need - when and where they need it.
$3.00
Click to read more about this product.
M-PAS-CABLE-2Cable - For Power All Systems, C-11/R
Designed for larger pedalboards, the Power-All Cable-11/R Daisy Chain features ELEVEN right-angle male barrel plugs with spring loaded jacks for extra secure connections – no more losing power mid-solo! 28-gauge cable with oil-resistant sheath and 10-inch cable length between plugs allows connection of larger and odd-sized pedals.
Plugs: (11): Diameter 5.5 mm external, 2.1 mm internal. Barrel length: 10 mm. Spring-loaded right-angle male plugs
Cable length: 3962.4 mm (approximately 156 inches) total, 270 mm (10.5") between jacks.
Whether you’re using the Power-All digital Power Supply or another manufacturers’ multi-output power brick, Power-All cables are the best way to assure that your pedals are getting the power they need - when and where they need it.
$15.00
Click to read more about this product.
M-PAS-CABLE-7Cable - For Power All Systems, C-R/R
Included in the Power-All System and also available separately, the Cable-Red/R allows the user to power effect units that have reverse polarity barrel connectors (tip positive/barrel negative). The Cable-Red/R features a tip positive, male barrel connector that is spring-loaded to prevent disconnection.
The Cable-Red/R can be hooked to any plug on any of the Power-All daisy chains, or directly to the Power-All.
Length: Cable-Red/R is 140 mm (approximately 5.5 inches) in length from plug to plug.
Whether you’re using the Power-All digital Power Supply or another manufacturers’ multi-output power brick, Power-All cables are the best way to assure that your pedals are getting the power they need - when and where they need it.
$3.00
Click to read more about this product.
M-PAS-CABLE-3Cable - For Power All Systems, C-BK/R
Included in the Power-All System and also sold separately, the Cable-Black/R allows the user to power over-sized effect units or units w/AC jacks in hard-to-reach places off of the Power-All Daisy Chain. The Cable-Black can be connected to any plug on any Power-All daisy chain, or directly to the PA-9 itself.
Plug: 5.5 mm W x 10 mm L with 2.1 mm internal diameter and spring-loaded plug.
Length: 267 mm (approximately 10.5 inches) between plugs.
Whether you’re using the Power-All digital Power Supply or another manufacturers’ multi-output power brick, Power-All cables are the best way to assure that your pedals are getting the power they need - when and where they need it.
$3.00
Click to read more about this product.
M-PAS-DKit - Power All System deluxe, for effects pedals
The Power-All Deluxe Kit provides 9 volts DC at 2000 milliamps @ more than enough current to power dozens of effect pedals, including up to 4 Line 6 Modelers! The Power-All Deluxe Kit can power eleven pedals out of the box, and comes complete with a variety of jumper cables that allow connection of phone plug, reverse polarity, digital, and battery-only pedal types.
$39.95
Click to read more about this product.
P-ECB-002Power Supply - Dunlop, 9V, 200mA, 3.5mm Positive Tip
AC Adapter. Plug type. 9 volt. US. Original Dunlop replacement part.
$11.75
Click to read more about this product.
M-PAS-CABLECAPCable Cap - For Power All Systems, Package of 3
Designed to fit over unused male barrel connectors on a daisy chain or power supply, Cable-Caps protect against short circuits that can occur when a live lead touches a metal surface.
Sold in sets of three. Fits over standard 5.5 mm diameter barrel plug connectors.
$1.95
Click to read more about this product.
P-H604Switch - Footswitch, SPST, Momentary, Solder Lugs, Soft Switch

SPST(single pole,single throw) normally open (off-on) momentary foot switch. Solder lugs, soft switching. These high quality switches are great for upgrading the footswitch in relay based pedals as well as tap tempo applications. Depressing the switch shorts the lugs together and when the switch is released it returns to it’s non connected state with no click.



  • SPST momentary switch
  • Soft, silent switching with no click
  • Normally open operation
  • Solder lugs
  • Nuts and washer included

$2.50
Click to read more about this product.
P-ECB-554Switch - Dunlop, MXR, DPDT, PC mount for Carbon Copy
Genuine Dunlop replacement foot switch for Carbon copy delay. DPDT, PC Mount.
$5.50
Click to read more about this product.
K-978Effects Pedal Kit - MOD® Kits, Step Ladder, Input Attenuator

The Step Ladder is a passive input attenuator using high quality components for excellent reliability. True-bypass mode provides the maximum signal level. The attenuator pot and two toggle switches allow for flexibility in the amount of signal attenuation when not in bypass mode. Treble bleed capacitors in the circuit retain crisp high frequencies even at maximum attenuation. The Step Ladder is ideal for anything from getting a slight boost while playing single-note acoustic guitar leads or for jumping from clean to overdrive in a high-gain electric guitar amp.


$36.95
Click to read more about this product.
K-980Effects Pedal Kit - MOD® Kits, The Persuader Deluxe, Overdrive
The Persuader Deluxe utilizes a Darlington preamp to push cascaded triode vacuum tubes into distortion.
Four dual triode vacuum tubes are included with each kit (JJ 5751, 12AX7B China, JJ 12AU7 and a NOS USA-made 12AT7). Swap to create a wide range of tones from just a hint of break up from the JJ 5751 to over the top crunchy distortion using the NOS US made 12AT7.
A boost switch provides an additional layer of flexibility with added gain and a little extra bottom end. An LED indicator lights up when the Persuader Deluxe is engaged and not in true bypass mode.
Operates on a 9V battery or AC adapter, which is not included. When completed, this pedal draws considerable current and battery life will be short. The Godlyke 9-volt adapter (M-PAS-S) may be purchased separately to power your new pedal.
$99.95
Click to read more about this product.
P-H501Switch - Footswitch, 3PDT, Blue, high quality

Good stomp-box effects switch (Triple Pole, Double Throw). 3PDT Latching type footswitch. High quality, made in Taiwan.


$6.95
Click to read more about this product.
P-H501-PCSwitch - Footswitch, 3PDT, Blue, PC Mount

3PDT latching footswitch with PC terminals. Blue with 9 terminals. Made in Taiwan.


$7.95
Click to read more about this product.
P-H498Switch - Footswitch, DPDT
Great replacement for stomp-box effects requiring a DPDT (Double Pole, Double Throw) switch.
$3.95
Click to read more about this product.
P-H492Switch - Carling, Footswitch, SPDT

Carling SPDT footswitch used in footswitch boxes and effects pedals (112-P).


$7.25
Click to read more about this product.
P-H493Switch - Carling, Footswitch, SPST, for Fender® & Others

Carling SPST footswitch. Used in Fender etc. Reverb/tremolo/channel switching pedals, (110-P).


$5.95
Click to read more about this product.
P-ECB-035Switch - Dunlop, Footswitch, GCB-95

GCB-95 switch. Original Crybaby part for all Crybaby models. Original Dunlop replacement part.


$9.65
Click to read more about this product.