Item Unavailable

Sorry! You're trying to check out one of our items which is no longer available. Why not check out one of these alternate options?
P-GGT-94-XBridge - Gotoh, Vintage Tele, Cut-Down Sides, In-Tune Saddles
Colors Available:

Gotoh’s Telecaster bridge has the vintage look and mounting layout with a few modern additions: The In-Tune saddles give you the vintage look with unique grooves cast into the saddle to move the contact point of each string for more accurate intonation. Each saddle is reversible and can be used in any position. This gives you a huge advantage over traditional barrel style saddles that were never designed with precision intonation in mind. The brass saddles will give you that bright Tele twang! The stamped steel base plate’s cut down sides give you the unrestricted string access that many modern players prefer.


Starting at $44.95
Click to read more
P-GGT-25-XTremolo - Wilkinson/Gotoh, VSVG, vintage nickel
Colors Available:
If you are looking for a tremelo that is designed for enhanced sustain and better reliability, then you have found it. The VSVG Vintage tremolo features enlongated baseplate holes so the screws won't bind and it gives a very smooth, accurate return to pitch. With the string mounting holes being staggered in the steel block you will find much more tuning stability because of the more consistent string angle over the adjustable locking bent-steel saddles. Hardware included.
Starting at $102.00
Click to read more
P-GGT-38-CTremolo - Gotoh, Low Friction, chrome
A newly fashioned design from Gotoh® with almost no internal friction. Designed to directly retrofit the mounting hole pattern of a vintage tremolo. You can use this bridge to replace a conventional, 6 mounting screw Strat® tremolo with no mods to the body. Hardware included.
$90.00
Click to read more
P-GGT-48-CBridge - Gotoh, 510TS-SF2 Series, Tremolo, Vintage Style, chrome
Gotoh 510TS Series Tremolos are machined with Chrome Molybdeumn Steel knife edges to withstand years of abuse and trouble free use. Comes stock with a vintage steel block with more mass and better tone. These are top of the line Gotoh tremolo units. Tremolo-unit includes the following accessories: Arm, Spring, Spring-holder, Wrench, Stud-bolt, Screw etc… Hardware included.
$130.00
Click to read more
P-GGT-68-CBridge - Gotoh, EV510T Series Tremolo
Gotoh 510T Series Tremolos are machined with Chrome Molybdeumn Steel knife edges to withstand years of abuse and trouble free use. The tremolo block is designed to allow the strings to contact the saddle without touching the block as it passes through which increases sustain and tuning stability. Hardware included.
$125.00
On Backorder
Click to read more
P-GGT-69-XNut - Gotoh, Floyd Rose Locking, top mount
Colors Available:
Gotoh locking nuts are superior quality locking nuts that directly replace original Floyd Rose and Floyd Rose style locking nuts. Top mount.
Width: 1-11/16'' (43mm). Included: Retainer bar, screws, wrench. Locking nut for Floyd Rose tremolo units.
$22.75
Starting at $21.75
You save: 4%
Click to read more
P-GGT-62-NGuitar Saddles - Gotoh, Vintage Style, Bass Guitar, nickel
Solid brass vintage style saddles for electric bass guitar. Set of 4 replacement bass guitar saddles.
$19.95
Click to read more
P-GGT-63-SBGuitar Saddles - Gotoh, with Adjustable Pivot, brass, set of 3
Same brass saddles used on the WT3 Wilkinson by Gotoh bridge. Also a great upgrade on your stock vintage style bridge. Adjustable pivot for intonation while maintaining a vintage tone. Set of 3 2-string saddle replacements.
$43.00
Click to read more
P-GGT-71-CSaddles - Gotoh, Steel for guitar, chrome
Steel saddles for electric guitar tremolo bridges and hardtail bridges. 2-3/32'' string spread. Set of 6 replacement steel guitar saddles.
$31.00
Click to read more
P-GGT-45-XEnd Pins - Gotoh
Colors Available:
Gold End Pins Sold in: Sets of 2.
Starting at $4.95
Click to read more
P-GH-CM-2CTuning Machine - Hipshot, Enclosed Gear Classic, Nickel
Multiple Options Available

Hipshot's New Classic Closed (enclosed gear) Guitar Tuners posses the precision, craftsmanship and technology you have come to expect from Hipshot Products.



  • 16:1 gear ratio for finer tuning
  • Schaller M6L Mini footprint.
  • The option for staggered post configuration means you can increase your headstock's break angle, remove buzz at the nut and ditch your pesky string tree!

$9.95
Click to read more
W-SC-W14Switch - Switchcraft, Pickup Selector Toggle, 3 Pos, Nickel Finish, Right Angle

Switchcraft Pickup Selector Toggle, L-Type, 3-Position.



  • Tip not included. See W-SC-W0X
  • Nickel Finish

$17.95
Click to read more
W-SC-W15Switch-Switchcraft, Pickup Selector Toggle, DPDT, Nickel Finish, Right Angle

Switchcraft Pickup Selector Toggle, DPDT, L-Type.



  • Tip not included. See W-SC-W0X
  • Nickel Finish

$19.95
Click to read more
W-SC-W16Switch - Switchcraft, Pickup Selector Toggle, SPST, Black Finish, Right Angle

Switchcraft Pickup Selector, Replacement for Gibson L-Type. Similar to Gibson® P-SW01. As found on 335 hollow body style guitars as well as thinner solid bodies such as the Gibson SG. Features a slightly longer (3/8”) bushing ideal for thicker topped guitars.



  • Tip not included. See W-SC-W0X
  • Black finish

$24.95
Click to read more
P-GB-HINGE-4GHinge - Bigsby/Gretsch, Gold for B11 and B12

Original Bigsby hinge for B11 and B12 models, Gold.


$23.95
Click to read more
S-TGTBAS1Bass Player Tech Kit - CruzTOOLS, GrooveTech

Not wanting to leave bass players out, we developed an alternate kit optimized for low-enders. The hex key set is matched to virtually all bass makes, and the string winder has been removed to save a couple of bucks. Like its guitar brethren, the GrooveTech Bass Kit has top-shelf tools that are lifetime guaranteed, and stored in a pouch that will fit into most gig bags. An Easy Setup Guide will make you comfortable with truss rod, action, pickup, and intonation adjustment.


$57.95
Click to read more
P-NECK-T-33Neck - for Telecaster Guitar, Vintage Rosewood

Replacement Vintage Telecaster® neck with mostly vintage and a few subtle modern features like 21 medium jumbo frets, 10 in. radius, 1 5/8 in. nut width, a comfortable C shaped profile and a honey tinted gloss finish. Rosewood finger board with a heel adjust truss rod location and 8.8mm peg holes drilled for a vintage Kluson® tuning machine as nature intended. Nut not included. Fender Licensed replacement neck.


$166.50
Click to read more
P-GB7-XVibrato - Bigsby, B7 Guitar, for Arch Top Electrics
Colors Available:

Bigsby B7 Specifications



  • Model Name: B-7
  • Series: Original Kalamazoo Line
  • Manufacturing Method: Cast
  • Manufacturing Material: Aluminum
  • Approximate weight: 354 grams/12.5 oz.
  • Overall Length: 8 ¾" /222.3 mm
  • Overall Width: 3 5/8" /92.1 mm
  • Arm adjusts with 1/8" Allen wrench and 5/16" socket wrench


Designed for use on arch top electric guitars. Multiple color options available. Bigsby Part No: 0495-B7 Bigsby Part No: 0495-B7G


Starting at $119.95
Click to read more
P-GTNN10Nut - Plastic, for Strat

Plastic strat guitar nut.


$1.95
On Backorder
Click to read more