Item Unavailable

Sorry! You're trying to check out one of our items which is no longer available. Why not check out one of these alternate options?
W-SC-W01Switch - Switchcraft, Pickup Selector, for Gibson® L-Type

Switchcraft Pickup Selector, Replacement for Gibson L-Type. Similar to Gibson® P-SW01. As found on 335 hollow body style guitars as well as thinner solid bodies such as the Gibson SG.


$11.95
Click to read more about this product.
W-SC-W0213Switch - Switchcraft, Pickup Selector, for Gibson® Straight
Colors Available:

Switchcraft Pickup Selector, Replacement for Gibson Straight-Type. As found on LP style solid body guitars.


Starting at $11.95
Click to read more about this product.
P-GT102XSwitchwashers - Rhythm/Treble, Gold Lettering, for Les Paul
Colors Available:

This Rhythm - Treble Ring for Gibson® Les Paul® is on thin plastic with Gold Lettering. The self-adhesive backing makes it easy to apply under the washer and nut of your typical 3-way toggle switch.


$1.95
Click to read more about this product.
P-GTNN07Nut - Bone, for Gibson, 43mm X 5.9mm X 8mm, Flat
Bone nut for Gibson®, 43mm x 5.9mm x 8mm at highest point with flat bottom.
$5.55
Click to read more about this product.
P-GT100XTruss Rod Cover - Fits Gibson
Colors Available:
This truss rod cover will directly replace any Gibson two-screw bell shaped truss cover with no modifications. Mounts with (2) screws not included. Available in B/W/B or Cream
$4.45
Click to read more about this product.
P-GTNN08Nut - Graphite, for Gibson
This graphite nut will work for most Gibson® and similar style guitars and basses. It is slotted but does require final shaping and fitting to exact size.
PLEASE NOTE: Because this nut tapers in both thickness from top to bottom and height on the fret board side vs. the headstock side all measurements for those dimensions were taken at the center of the nut.
  • Length = 1 23/32 inches (43.75mm)
  • Height #1 (fretboard side) = 5/16 inches (7.81mm)
  • Height #2 (headstock side) = 9/32 inches (7mm)
  • Thickness at bottom = 15/64 inches (6.1mm)
  • Thickness at top = 3/16 inches (4.78mm)
$4.55
Click to read more about this product.
P-H100XJack Plate - Fits Les Paul, Plastic
Colors Available:

Generic plastic jack plate. Fits Les Paul and other guitars. Mount the guitar's output jack in the ⅜" hole in the center of the jack plate.


$1.95
Click to read more about this product.
P-GTFW6130Fret wire - Dunlop, large, for early Gibson
Dunlop®, 6130,.036" x.106", 28% nickel/silver, hard alloy, 2 5/8" long, large/jumbo size, good on early Gibson®, 24 pieces
$12.25
Click to read more about this product.
P-BH-ST-XBridge - Hipshot, SuperTone, 2 Point Bass
Colors Available:

Hipshot 4 string Supertone 2 point bass bridge. A direct replacement for 1967 to 1973 Gibson 2 point bass bridges (e.g. Thunderbird, SG Bass, etc.) using the existing hole pattern. Features complete adjustability for precise intonation, independent string height and side-to-side string spacing. Includes: (2) 5/16-20 hex cap socket screws and (2) hex/allen keys: 1/16” and 5/64”


$115.00
Click to read more about this product.
P-K553XKnob - Top Hat, Embossed Numbers, Gibson Style
Colors Available:

Gibson style top hat knob with embossed numbers. Multiple color options available.


$2.25
Click to read more about this product.
P-GH-CM-2CTuning Machine - Hipshot, Enclosed Gear Classic, Nickel
Multiple Options Available

Hipshot's New Classic Closed (enclosed gear) Guitar Tuners posses the precision, craftsmanship and technology you have come to expect from Hipshot Products.



  • 16:1 gear ratio for finer tuning
  • Schaller M6L Mini footprint.
  • The option for staggered post configuration means you can increase your headstock's break angle, remove buzz at the nut and ditch your pesky string tree!

$9.95
Click to read more about this product.
P-GGT-94-XBridge - Gotoh, Vintage Tele, Cut-Down Sides, In-Tune Saddles
Colors Available:

Gotoh’s Telecaster bridge has the vintage look and mounting layout with a few modern additions: The In-Tune saddles give you the vintage look with unique grooves cast into the saddle to move the contact point of each string for more accurate intonation. Each saddle is reversible and can be used in any position. This gives you a huge advantage over traditional barrel style saddles that were never designed with precision intonation in mind. The brass saddles will give you that bright Tele twang! The stamped steel base plate’s cut down sides give you the unrestricted string access that many modern players prefer.


Starting at $44.95
Click to read more about this product.
W-SC-W14Switch - Switchcraft, Pickup Selector Toggle, 3 Pos, Nickel Finish, Right Angle

Switchcraft Pickup Selector Toggle, L-Type, 3-Position.



  • Tip not included. See W-SC-W0X
  • Nickel Finish

$17.95
Click to read more about this product.
W-SC-W15Switch-Switchcraft, Pickup Selector Toggle, DPDT, Nickel Finish, Right Angle

Switchcraft Pickup Selector Toggle, DPDT, L-Type.



  • Tip not included. See W-SC-W0X
  • Nickel Finish

$19.95
Click to read more about this product.
W-SC-W16Switch - Switchcraft, Pickup Selector Toggle, SPST, Black Finish, Right Angle

Switchcraft Pickup Selector, Replacement for Gibson L-Type. Similar to Gibson® P-SW01. As found on 335 hollow body style guitars as well as thinner solid bodies such as the Gibson SG. Features a slightly longer (3/8”) bushing ideal for thicker topped guitars.



  • Tip not included. See W-SC-W0X
  • Black finish

$24.95
Click to read more about this product.
P-GB-HINGE-4GHinge - Bigsby/Gretsch, Gold for B11 and B12

Original Bigsby hinge for B11 and B12 models, Gold.


$23.95
Click to read more about this product.
S-TGTBAS1Bass Player Tech Kit - CruzTOOLS, GrooveTech

Not wanting to leave bass players out, we developed an alternate kit optimized for low-enders. The hex key set is matched to virtually all bass makes, and the string winder has been removed to save a couple of bucks. Like its guitar brethren, the GrooveTech Bass Kit has top-shelf tools that are lifetime guaranteed, and stored in a pouch that will fit into most gig bags. An Easy Setup Guide will make you comfortable with truss rod, action, pickup, and intonation adjustment.


$57.95
Click to read more about this product.
P-NECK-T-33Neck - for Telecaster Guitar, Vintage Rosewood

Replacement Vintage Telecaster® neck with mostly vintage and a few subtle modern features like 21 medium jumbo frets, 10 in. radius, 1 5/8 in. nut width, a comfortable C shaped profile and a honey tinted gloss finish. Rosewood finger board with a heel adjust truss rod location and 8.8mm peg holes drilled for a vintage Kluson® tuning machine as nature intended. Nut not included. Fender Licensed replacement neck.


$166.50
Click to read more about this product.
P-GB7-XVibrato - Bigsby, B7 Guitar, for Arch Top Electrics
Colors Available:

Bigsby B7 Specifications



  • Model Name: B-7
  • Series: Original Kalamazoo Line
  • Manufacturing Method: Cast
  • Manufacturing Material: Aluminum
  • Approximate weight: 354 grams/12.5 oz.
  • Overall Length: 8 ¾" /222.3 mm
  • Overall Width: 3 5/8" /92.1 mm
  • Arm adjusts with 1/8" Allen wrench and 5/16" socket wrench


Designed for use on arch top electric guitars. Multiple color options available. Bigsby Part No: 0495-B7 Bigsby Part No: 0495-B7G


Starting at $119.95
Click to read more about this product.
P-GTNN10Nut - Plastic, for Strat

Plastic strat guitar nut.


$1.95
Click to read more about this product.