Item Unavailable

Sorry! You're trying to check out one of our items which is no longer available. Why not check out one of these alternate options?
S-W7XLWire - Hook-Up, Lacquered spool
Colors Available:
#20 stranded copper wire with modern insulation and lacquered cotton braid finish. Provides safety and authentic vintage look.
Multiple sizes and colors available.
105°C temperature rating, 600V.
Starting at $7.50
Click to read more about this product.
S-W22Wire - Hook-Up, 22 AWG, 50 foot roll
Colors Available:
600V stranded, tinned wire. UL style 1015, rated to 105 degrees C. Perfect for new projects or rewiring any electrical equipment.
$4.95
Click to read more about this product.
S-W428XWire - Bus, 100' Spool
Multiple Options Available
Solid tinned copper bus wire.
105°C temperature rating, 600V.
Starting at $6.95
Click to read more about this product.
S-W111Wire - 22 AWG, stranded with tin braid
For vintage reverb tank cables. 22 AWG, stranded with tin braid. Outer Diameter: 0.10".
105°C temperature rating, 600V. Sold per foot.
$0.95
Click to read more about this product.
S-M12-1046Heat Shrink - 3/16" diameter x 6" long, 27 pieces
The shrink ratio on this tubing is 2 to 1, it is fungus resistant and non-corrosive. It is recommended for tightly sealing connectors, terminals, wire splices, and tool handles. It may be shrunk with heat guns, oven, etc. Comes in 6 inch lengths, quantity of 27.
$6.95
Click to read more about this product.
S-M436WSpaghetti - Old-Style, White, 20 AWG
White fiberglass sleeving is varnished and closely resembles early style spaghetti. 20 AWG. 11 AWG also available as part number S-M401W. Minimum order is 10 feet
This product has a Class F electrical insulation, manufactured by impregnating and coating a finely braided fiberglass sleeving with a dielectric film of acrylic resin.
$0.50
A minimum order of at least 10 is required.
Click to read more about this product.
S-M12-1048Heat Shrink - ¼" diameter x 6" long, 23 pieces
The shrink ratio on this tubing is 2 to 1, it is fungus resistant and non-corrosive. It is recommended for tightly sealing connectors, terminals, wire splices, and tool handles. It may be shrunk with heat guns, oven, etc. Comes in 6 inch lengths, quantity of 23.
$6.95
Click to read more about this product.
S-M401WSpaghetti - Old-Style, White, 11 AWG, Minimum Order is 10'
White fiberglass sleeving is varnished and closely resembles early style spaghetti. 11 AWG. 20 AWG available with part number S-M436W. 10 foot minimum order.
This is a coated fiberglass sleeving made by applying a proprietary blend of acrylic polymers to a closely woven electrical grade fiberglass substrate.
This sleeving has excellent electrical, chemical and oil resistance properties, excellent heat stability and flexibility for ease of push-up and recovery. It exhibits excellent resistance to oils, acids and alkalis and solvents.
$0.60
Click to read more about this product.
P-HWRP18-3Cable Organizer - Wrap N Strap, 18", Mixed Colors, Package of 3
Adjustable rubber strap designed to neatly bundle cables. Packages are mixed colors.
$8.75
Click to read more about this product.
S-M12-1080Heat Shrink - Assorted diameters, 6" long, 23 pieces
The shrink ratio on this tubing is 2 to 1, it is fungus resistant and non-corrosive. It is recommended for tightly sealing connectors, terminals, wire splices, and tool handles. It may be shrunk with heat guns, oven, etc. Comes in 6 inch lengths.
$4.50
Click to read more about this product.
P-PC-BB400BreadBoard - Solderless, 400 point pattern

Solderless (plug-in) breadboard with 400 connection tie-points (i.e. 400 wire insertion holes) and 4 power rails. Solderless breadboards are great for building and testing new circuits because parts can be easily inserted and removed making them completely re-usable. This breadboard has a 300 tie-point IC-circuit area plus four 25 tie-point power rails. The housing is made of white ABS plastic, with a printed legend giving numbers and letters for columns and rows. The internal contacts are phosphor bronze with a plated nickel finish and a peelable adhesive tape backing is provided for attaching it to a surface. Be sure to check out the Zipwire™ jumper wire kits for use with this breadboard.


$4.75
Click to read more about this product.
S-CF5S-H6DeoxIT® Fader F5 - Caig, 5% solution

This product is a precision lubricant for moving contact surfaces (faders, switches, potentiometers and other mechanisms with sliding surfaces). It replenishes lubrication lost on surfaces that have been cleaned with solvents or other cleaning solutions.


$16.95
Click to read more about this product.
P-PC-SB404BreadBoard - Solderable PCB, 400 point pattern
Solderable PC BreadBoard enables you to transfer your circuit and wires from a plug-in breadboard without recutting wires or changing your layout. This breadboard has the same pattern as a standard 400 connection point solderless plug-in breadboard which has a standard 5-hole strip for each IC pin, just like solderless breadboards. However, it has the advantage that soldered joints provide a more reliable long-term connection than solderless contacts.
The board has four power rails like solderless breadboards, plus two bonus rails for power or signals. There are bonus two-hole pads along the centerline allowing DIL (dual in-line) headers to be used as well as a top side silkscreen to position components. Four mounting holes allow your projects to be secured.
$4.50
Click to read more about this product.
S-CAX1W-20Axe wipes - Caig, metal string cleaner, package of 20
Axe Wipes - Metal string cleaner. Pack of 20, individually wrapped
Get better sound quality from ALL your strings
Cleaner, lubricant and protectant for metal strings
  • Prolongs life of metal strings
  • Improves sound quality
  • Dissolves oxidation and corrosion
  • Protects against acid from hands
  • Lubricates for fast / smooth movement
  • Safe to use. No waxy buildup. Contains no teflon, silicone or solvents
  • Package of 20

Use on all metal musical instrument strings;
guitars, banjo, violin, autoharp, hammer dulcimer, mandola, pedal steel, zither, etc.
$13.95
Click to read more about this product.
S-TGTBAS1Bass Player Tech Kit - CruzTOOLS, GrooveTech

Not wanting to leave bass players out, we developed an alternate kit optimized for low-enders. The hex key set is matched to virtually all bass makes, and the string winder has been removed to save a couple of bucks. Like its guitar brethren, the GrooveTech Bass Kit has top-shelf tools that are lifetime guaranteed, and stored in a pouch that will fit into most gig bags. An Easy Setup Guide will make you comfortable with truss rod, action, pickup, and intonation adjustment.


$57.95
Click to read more about this product.
S-CMP02Fretboard Conditioner - Lizard Spit, 4oz.
Removes dirt and stains and slows oxidation of frets. Protects against drying and cracking by moisturizing and conditioning to preserve fret board life. Use Lizard Spit Guitar Polish for finished surfaces.
$8.25
Click to read more about this product.
S-CMP04Cloth - Lizard Spit, Micro Fiber
Baby blue micro fiber cloth for use with Lizard Spit or other polishing products.
$6.25
Click to read more about this product.
S-CMP08Polish - Lizard Spit, VIP Vintage for Instruments, 4 oz.

Lizard Spit vintage polish for all paint surfaces. Removes: Old wax build-up without causing chemical reactions commonly associated with other products. Produces: Brilliant Shine.


$10.75
Click to read more about this product.
S-CGBCP01Care Pack - Lizard Spit, for Guitar/Bass

This Lizard Spit Guitar and Bass Care Pack contains 4 oz. Fretboard Conditioner, 4 oz. Guitar Polish, and a Lizard Spit Micro Fiber Cloth, everything you need to keep your guitar or bass in good condition and looking brand new!


$21.00
Click to read more about this product.
P-PC-PAD1PadBoard - Size 1, Double Sided, Plated Holes

Prototyping circuit board that has a general purpose pad-per-hole pattern making it great for general purpose analog and digital use. It is a double-sided board with plated holes, which allows components to be easily soldered to either side of the board. A square pad is provided every 5th hole, which makes it easy to align components on the top and bottom of the board. An anti-tarnish coating protects the copper for a long shelf-life and provides easy soldering.



For fastening your project to a surface see our adhesive standoffs (S-H190-X)



Features:



  • Pad-per-hole prototyping board with plated-thru holes. A square pad every 5th hole makes it easy to align components on top and bottom.
  • Double-sided high-quality FR4 glass-epoxy circuit board with plated holes. Components can be soldered to either side.
  • 1oz/ft2 copper with an anti-tarnish coating for easy soldering.
  • 31 x 19 holes, 0.037" holes are drilled on 0.1" (2.54mm) centers. Four 0.125” mounting holes.
  • Size 1 = 1.97 x 3.15in (50 x 80mm), 1/16" thick (1.6mm)

$2.95
Click to read more about this product.