Cables

Vintage style Switchcraft instrument cables that match the original case candy cables sold with 1960s Fender® and Gibson guitars. These use high quality cable with a braided shielding over the 22AWG single conductor with a durable gray PVC outer jacket. The ends feature the classic molded connectors found on the vintage cables. Features

• Classic Switchcraft Molded ¼” (6.35mm) Connectors
• Straight to Right Angle
• Braided Shielding
• 22AWG Conductor
• Durable PVC Outer Jacket
• Vintage Style

Black nylon cable clamps perfect for securing cables to cabinet walls. These clamps feature a .203 in. mounting hole. The ⅜ in. diameter cable clamp is commonly used on Fender® amplifiers for securing the power cord. The ¼ in. diameter cable clamp is commonly used on Fender® amplifiers for securing the RCA reverb tank cables. The 5/16 in. version works well with the S-W125X and S-W132X bare end power cables. See P-HCABLECLAMP-X for white nylon versions of these clamps.

Included in the PA-9ECB Basic Kit, PA-9ECD Deluxe Kit, and also available separately, the Cable-Green Right Angle jumper allows the user to power Line-6 Stomp-Box modelers and other digital effect units from the ECO-Dapter®. The Cable-Green features a reverse-polarity (tip positive), right-angle male barrel connector with a larger, 2.5 mm internal diameter and spring-loaded clips. The Cable-Green/R can be used with Line-6 Modelers, Electro-Harmonix units, and other pedals requiring a larger internal diameter plug. the Cable-Green/R can be connected to the male plugs on any Power-All Daisy Chain, or directly to the ECO-Dapter® itself.

High quality hand-soldered instrument cables from ProCo. The Excellines line is comprised of highly regarded instrument cables used by professionals and musicians worldwide. This instrument cable features ProCo's 20 AWG, cable, with a very durable & flexible jacket and ¼" Neutrik right angle plug to ¼" Neutrik straight plug.
Features:

• Unbalanced instrument/patch cable, 1/4" TS Male - Right Angle 1/4" TS Male
• Metal Neutrik connectors for reliability
• Exceptional shielding and construction
• Limited Lifetime replacement warranty through Pro Co

Included in the PA-9ECB Basic Kit, PA-9ECD Deluxe Kit, and also available separately, the Cable-Red/R allows the user to power effect units that have reverse polarity barrel connectors (tip positive/barrel negative). The Cable-Red/R features a tip positive, male barrel connector that is spring-loaded to prevent disconnection. The Cable-Red/R can be hooked to any plug on any of the Power-All daisy chains, or directly to the Power-All.

Professional grade ProCo Excelline premium speaker cable. ProCo Excelline cables just work, assuring that the only distortion in your sound comes from your pedal-board. Sometimes buzz or distortion is good—but not when it comes from a bad cable. 2-conductor, 16 AWG. Made In USA.

Made in USA instrument cable with a 0.195” outer diameter. This high quality cable is perfect for pedal boards patch cables and also works great for standard instrument cables.

• 20AWG stranded bare copper conductor
• Polyethylene insulation covered by a sheet of conductive vinyl
• Copper braid shield
• PVC outer jacket

ProCo StageMaster low-impedance microphone cables are designed to be quiet, durable and dependable. These cables are hand-soldered with top-quality metal XLR connectors and extremely low-noise, twisted-pair wire.

• Quiet and Durable CS-MIC.K 2-conductor Shielded Audio Cable
• Terminated with High Quality Nickel Plated XLR Connectors for Years of Superior Performance and Maximum Value
• Individually Tested to Meet Performance and Quality Requirements

Nylon cable clamps perfect for securing cables to cabinet walls. These clamps feature a .203 in. mounting hole. The ⅜ in. diameter cable clamp is commonly used on Fender® amplifiers for securing the power cord. The ¼ in. diameter cable clamp is commonly used on Fender® amplifiers for securing the RCA reverb tank cables. The 5/16 in. version works well with the S-W125X and S-W132X bare end power cables.

Right angle RCA cables for Reverb Tanks and other electronic devices.

Nylon cable tie mounts with adhesive backing. These mounts easily attach to most surfaces using a strong foam adhesive. Zip ties can be fed through the openings on the mount to secure wires to an enclosure, board, or any other convenient location.

20 AWG stranded (27x34) high-conductivity tinned copper conductor, EPDM rubber insulation, conductive textile (100%) plus tinned copper spiral shields (95% coverage), paper tape, CPE jacket. This cable type is popularly used in microphones and has many other applications.

A 6.5mm noiseless cable equipped ¼" straight molded phone plug ends. Specifically designed cables prevent shocks and allows for minimum hum or noise. Provides 100% signal! Braided Fabric Covered Cable with Gold Plated Plugs

Easy to use cable tie gun cuts ties up to 50 lb. tensile. Use this tool to pull ties tightly and then cut the excess length.

Connector - for Accutronics Blue reverb tanks P-RAMC2BF2 and P-RAMC2BF3. One green and one red per item.

A 6.5mm 2P braided microphone cable. Specifically designed to prevent shocks and allows for minimum hum or noise. Provides 100% signal! Braided XLR Female to 1/4" phone plug, High Z

Designed for larger pedalboards, the Power-All Cable-11/R Daisy Chain features ELEVEN right-angle male barrel plugs with spring loaded jacks for extra secure connections – no more losing power mid-solo! 28-gauge cable with oil-resistant sheath and 10-inch cable length between plugs allows connection of larger and odd-sized pedals.

Make your own cable. Excellines 20 AWG 26 strand guitar cable. Sold per foot

Included in the PA-9ECD Deluxe Kit and also sold separately, the Cable-Blue/R features a right-angle jack that allows users to power effect units that use a ⅛" (3.5 MM) phone plug connector with tip-positive polarity. The Cable-Blue/R can be connected to any male jack on the Cable-5 Daisy Chain, or directly to the ECO-Dapter® itself.

ProCo cable is the world renown industry standard. The excellines cable are the musician's choice when it comes to guitar cable made with G&H ¼" BigFoot straight phone plug to ¼" Bigfoot right angle phone plug.

Included in the PA-9ECB Basic Kit and also sold separately, the Cable-Grey allows the user to power vintage and boutique effect units that run off 9-volt batteries but do not have an external AC power jack. The Cable-Grey hooks directly to the unit's Battery Snap and can be connected to any of the Power-All daisy chains, or directly to the Power-All.

Make your own cable. Excellines 16AWG two conductor non-shielded cable is sold by the foot.

The Fender® Original Series raises the bar for quality and reliability with their coiled cables. This cable uses a 23 gauge 99.95% oxygen free copper conductor with a 90% shield and a classic Fender® color for the insulation. These hand soldered cables use nickel plated ¼” connectors with a right angle and one straight plug.

24AWG StageMASTER Instrument Cables are designed to be quiet, durable and dependable. They are hand-soldered to perfection using top quality metal ¼" connectors and extremely low-noise cable.