Capacitor - CE Mfg., 350V, 50/50/50/50 μF

Capacitor - CE Mfg., 350V, 50/50/50/50 μF

CE Manufacturing
Capacitor - CE Mfg., 350V, 50/50/50/50 μF image 1
Click to zoom in
Customer Images:
No Images yet! Submit a product image below!
In Stock

CE Manufacturing USA Made Multi Section Can Capacitor. Reproduced To Exact Mallory Specs Using Original Mallory Machinery.

  • 50/50/50/50 μF 350VDC.
  • FP / Twist Lock Style. Solder Tabs.
  • -10%, +50% Tolerance, 85°C Temperature Rating.
  • 1 ⅜"D X 2 ½"H.
Item ID:
CE Manufacturing
Termination Style:
Voltage Rating:
RoHS Compliant
Product Measurements by Type
Bottom Diameter1.46 in.
Diameter1.375 in.
Item Height2.6 in.
Rated Voltage350 V
Section 1 Capacitance50 μF
Section 2 Capacitance50 μF
Section 3 Capacitance50 μF
Section 4 Capacitance50 μF
Tab Typesolder tabs
Temperature Rating85°C
Tolerance-10%, +50%
Packaging Information
Packaging Dimensions3.1 in. × 1.5 in. × 1.5 in.
Weight (Packaging)0.175 lbs.

My Project Lists

You must be logged in to add items to a project list.

Questions and Answers

Click each question to see its answers.
Asked by Anonymous on February 28th, 2016.
March 1st, 2016
Staff Member
Top Contributor
This capacitor should be a great replacement providing the values and overall measurement match your specs.

Product Reviews

5.00 out of 5 based on 8 reviews
- September 13th, 2021
5 out of 5

The capacitor appeared to be an exact replacement for a power supply filter capacitor in an antique McIntosh MX110 stereo tuner and preamplifier. The capacitor attaches to the chassis by a mounting flange. Both the capacitor and the mounting flange were physically identical to the one being replaced. This exact fit made replacement easy. I tested the replacement unit, and all four of the partitions tested with a few extra microFarads over the 50 advertised. This extra capacity was a definite plus. I also noticed that the working voltage of the new unit was 350 Volts, whereas the unit being replaced had a working Voltage of only 200 Volts. I welcomed the extra voltage.

I am more than satisfied with the quality of the capacitor, and its being such a perfect replacement.

- March 26th, 2021
5 out of 5

perfect classic replacement. Thankful it's still around!

- July 27th, 2019
5 out of 5

This CE Mfg. cap works well as a replacement for the original 80uF/80uF/60uF @ 300V filter cap as used in my Hallicrafters SX-130 receiver. I wired the replacement as a 100uF/50uF/50uF @ 350V and it sounds good with no 60 Hz hum (half wave silicon rectifier).

- February 28th, 2019
5 out of 5

I was very delighted with this capacitor. It was a perfect replacement for the old Cornell Dobilier cap in my McIntosh MR 65B. Fit right into the slots for the old cap. Thanks

- June 3rd, 2015
5 out of 5

Excellent..they fit just like the originals....

- May 17th, 2015
5 out of 5

These were ideal to replace old capacitors in a voltage doubler circuit in a Fisher tube type amplifier. All sections were bridged together to develop 200uF value for each one. A cardboard sleeve was made to cover one to prevent shock hazard when handling the unit while it was on. Glad that you had these available!

- December 11th, 2014
5 out of 5

Easy to install and has performed well in my H.H. Scott 340 B Stereo Receiver.

- December 2nd, 2014
5 out of 5

Excellet capacitor, nice quality and detail. Very pleased with item and purchase. I would like to see more C&E multisection twist-lok types available. The power supply caps for the older Fisher tube type receivers and for the Mcintosh, 250mfd @ 250volt voltage doubler caps used in the MC240, mc40, mc75 etc. are two examples.