Capacitor - CE Mfg., 475V, 20/20/20/20µF, Electrolytic
CE Manufacturing USA Made Multi Section Can Capacitor. Reproduced To Exact Mallory Specs Using Original Mallory Machinery.
- 20/20/20/20uF 475VDC Electrolytic.
- FP / Twist Lock Style. Solder Lugs.
- -10%, +50% Tolerance, 65°C Temperature Rating.
- 1 ⅜"D X 2"H.
Great replacement for the can capacitor in the Princeton AA964, Princeton AB1270, Princeton Reverb AA1164, Princeton Reverb AA760 and Princeton Reverb AB1270.
All CE manufactured can capacitors have a two year warranty against manufactured defects.
SKU:
C-EC20X4-475
Item ID:
001508
UPC/EAN:
609722127943
Brand:
CE Manufacturing
Capacitance:
Termination Style:
Voltage Rating:
RoHS Compliant
Bottom Diameter | 1.46 in. | |
Diameter | 1.375 in. | |
Item Height | 2.1 in. | |
Rated Voltage | 475 V | |
Section 1 Capacitance | 20 μF | |
Section 2 Capacitance | 20 μF | |
Section 3 Capacitance | 20 μF | |
Section 4 Capacitance | 20 μF | |
Tab Type | solder tabs | |
Temperature Rating | 65°C | |
Tolerance | -10%, +50% |
Packaging Dimensions | 2.6 in. × 1.5 in. × 1.5 in. | |
Weight (Packaging) | 0.127 lbs. |
My Project Lists
Questions and Answers
Click each question to see its answers.
1 answers
Do you carry a matching chassis clamp to go with this multi-section cap?
Asked by [email protected] on December 14th, 2015.
Yes, the corresponding clamp would be part # S-H122
1 answers
Why is the voltage rating only 55°C on some of your multi section caps and 85°C on others?
Asked by bereanbill on January 30th, 2017.
All caps over 500 volts will have a voltage rating of 85°C and caps below 500 volts will have a rating of 55°C. These are the original Mallory specs and we makes these in house on genuine Malory equipment.
1 answers
Is the can common ground on this cap?
Asked by Anonymous on February 1st, 2017.
Yes, the can itself would be the common ground.
1 answers
What do the tag markings mean?
Asked by Anonymous on March 21st, 2019.
Each of the sections will be assigned a shape that corresponds to the lug for that section of the cap. These are included to more easily keep track of what section is being wired in which way.
Product Reviews
Used a pair of these in two 100 watt Chicago Transformer 6550 based tube amp projects I'm building. It was the perfect fit for the lower voltage preamp stages. Nice low profile and looks great on the chassis!
Good drop in replacement. It was within tolerance and works well.
Fit perfectly into the RCA 18T I was refurbishing. It had higher capacity for 3 of the sections which were 10 MFD 460V, and the 4th section originally was 20MFd at 50V... this exceeded the old specs and works very well.
I installed two on my old Bogen AP30 stereo amp. Nice to have it running quietly again.
I installed two on my old Bogen AP30 stereo amp. Nice to have it running quietly again.
Replaced the can capacitor on a Heathkit W4-AM. Value are perfect match, the height is a little less than the one that was in there (not sure if it was original, but probably was given the looks of the soldering). The base fit perfectly with the insulating mounting pad that I also ordered.
Works like a champ in my SRA-3. Suitable sub!
product great as usual!!! Always go here to get the best capacitors.
fit my Dynaco PAS-3 perfectly with a additional radial cap under the chassis
Great drop in replacement for old AMPEG ET-2B Super Twin Echo amp.
Nice product.