Capacitor - CE Mfg., 525 V, 40/40/40 μF

Capacitor - CE Mfg., 525 V, 40/40/40 μF

CE Manufacturing
Capacitor - CE Mfg., 525 V, 40/40/40 μF image 1
Customer image:<br/>"Replaced filter caps in Foisher A600"
Customer image:<br/>"CE 40 x 3 cap installed in 75!-4"
Customer image:<br/>"40,40,40 all at 350 volts filter can"
Click to zoom in
Capacitor - CE Mfg., 525 V, 40/40/40 μF image 1
Customer Images:
Customer image: "Replaced filter caps in Foisher A600"Customer image: "CE 40 x 3 cap installed in 75!-4"Customer image: "40,40,40 all at 350 volts filter can"
In Stock

CE Manufacturing USA Made Multi Section Can Capacitor. Reproduced To Exact Mallory Specs Using Original Mallory Machinery.

  • 40/40/40uF 525VDC.
  • FP / Twist Lock Style. Solder Tabs.
  • -10%, +50% Tolerance, 55°C Temperature Rating.
  • 1 ⅜"D X 3"H.

All CE manufactured can capacitors have a two year warranty against manufactured defects.

Item ID:
CE Manufacturing
Termination Style:
Voltage Rating:
RoHS Compliant
Product Measurements by Type
Bottom Diameter1.46 in.
Diameter1.375 in.
Item Height3.08 in.
Rated Voltage525 V
Section 1 Capacitance40 μF
Tab Typesolder tabs
Temperature Rating55°C
Tolerance-10%, +50%
Packaging Information
Packaging Dimensions3.5 in. × 1.5 in. × 1.5 in.
Weight (Packaging)0.211 lbs.

My Project Lists

You must be logged in to add items to a project list.

Questions and Answers

Click each question to see its answers.
Asked by [email protected] on October 2nd, 2018.
October 2nd, 2018
Staff Member
The S-H120 should be the correct insulator for this cap:
Asked by Anonymous on November 29th, 2018.
November 29th, 2018
Staff Member
These caps are formed as part of the manufacturing process.
Asked by Anonymous on July 15th, 2020.
July 17th, 2020
Staff Member
You will need a hole to accommodate the mounting style you are using. Since these are mostly used with high voltages, we would recommend a single large hole to reduce the risk of arcing or shorting the tabs.
Asked by Anonymous on July 24th, 2022.
July 25th, 2022
Staff Member
The voltage rating applied to capacitors refer to the maximum amount of voltage it can safely run through it without damage, so in most cases, replacing a cap with one with a higher voltage is absolutely fine. The one thing to keep in mind is that most of the time, going higher in voltage will result in a larger capacitor, so in some cases there is a size restraint that prevents that from being an option.

Product Reviews

4.85 out of 5 based on 20 reviews
gmannz1 - July 14th, 2022
5 out of 5

product was delivered quicky matched the factory configuration and worked great. Thanks

Michael A. Machajewski - May 2nd, 2022
5 out of 5

Was looking for a 40-40-40 at 350v and could not find at my normal electronic supply houses. Someone at suggested Antique Electonic Supply and this item fit the need and was the proper dimensions. Was what I was looking for to complete restoration of my Collins 75A4.

ccarrascal - March 25th, 2022
5 out of 5

excellent quality parts, thanks

John Morgan - March 7th, 2022
5 out of 5

Prefect match for the electrolytic cap in the Collins 75A-4.

Bruce McClean - February 20th, 2022
5 out of 5

This is a drop-in replacement for the C61 ( 40/40/40uf @ 450vdc ) can capacitor in my Browning Mark III transmitter ! The transmitter now operates like new with good signal and audio reports ! Antique Electronic Supply will be my one stop shop for my tube radio restorations from now on ! Many thanks , Bruce

Rob A - February 13th, 2022
5 out of 5

Replaced Mallory can caps from the 80's and slow-formed them using a variac and an in-rush limiter. My amp maxed out at 510v with no tube load and the caps held as they should have. These CE Mfg. caps fit perfectly in the legacy 'twist-type' mounting brackets.

The amp had a low frequency oscillation and hum with the old caps. Now the amp is now very quiet, crisp and clear. I will be purchasing more!

Andrew Thrasher - June 30th, 2020
5 out of 5

I restore tube type Citizens band radios like the Tram and Browning models of days past. These capacitors are well worth every penny and are quality replacement pieces manufactured to the highest standards. I would recommend for any restorations requiring multi-section canister style capacitors.

Matkovich - November 8th, 2019
5 out of 5

Great.quality capacitor!

Lee Craner - November 4th, 2019
5 out of 5

Works just as it should and, for me this is important, it looks original rather than the shiny plated capacitor cans offered by others.

David Harmon K6XYZ - July 26th, 2019
5 out of 5

This 3 section cap is the perfect fit for the Collins 75A-4 receiver.
Unlike other 'can' caps, this cap has true 'twist lok' tabs to enable you to get a positive, tight, no-rattle secure mounting to the chassis.
The cap values checked close to the marked capacitance.
It arrived quickly and I installed it the same day.
Of worked just fine!!!
This is nothing new around here though as I have previously used several of these multisection caps from Antique and will continue to do so.
Thanks for a great product!!