Capacitor - CE Mfg., 525V, 40/40/20/20 μF
CE Manufacturing USA made multi section can capacitor. Made to Mallory specs using original Mallory machinery.
- 40/40/20/20uF 525VDC.
- FP / Twist Lock Style. Solder Tabs.
- -10%, +50% Tolerance, 55°C Temperature Rating.
- 1-⅜" dia. X 3" tall.
SKU:
C-EC4020X2-525
Item ID:
001522
UPC/EAN:
609722128018
Brand:
CE Manufacturing
Termination Style:
Voltage Rating:
RoHS Compliant
| Bottom Diameter | 1.46 in. | |
| Diameter | 1.375 in. | |
| Item Height | 3.08 in. | |
| Rated Voltage | 525 V | |
| Section 1 Capacitance | 40 μF | |
| Section 2 Capacitance | 40 μF | |
| Tab Type | solder tabs | |
| Temperature Rating | 55°C | |
| Tolerance | -10%, +50% |
| Packaging Dimensions | 3.6 in. × 1.5 in. × 1.5 in. | |
| Weight (Packaging) | 0.188 lbs. |
My Project Lists
Questions and Answers
Click each question to see its answers.
1 answers
Are these new production units?
Asked by Anonymous on September 6th, 2015.
September 8th, 2015
Staff MemberTop Contributor
These capacitors are produced by us in Tempe, Arizona USA to original Mallory specs on Mallory equipment.
1 answers
Does the Negative lead go to the case?
Asked by Anonymous on November 11th, 2016.
November 11th, 2016
Staff Member
Yes, the negative or common ground is the tab attached to the case.
1 answers
Please give the distance between centers of the mounting plate holes.
Asked by Anonymous on May 2nd, 2017.
May 2nd, 2017
Staff Member
These 4 section can caps correspond with our mounting plates: S-H120. The center to center distance of these mountings plates is: 1.79".
1 answers
Hi can you please tell me the distance between the mounting tabs?
When I say distance I am referring to the flat face of one tab to the flat face of its opposite....for instance the tab at 12 o'clock measured to the tab at 6 o'clock.....hopefully it's 1 inch.
Asked by 66GT on June 24th, 2018.
June 25th, 2018
Staff Member
These are just over an inch at 1.09".
1 answers
Hi. I'm considering this 40/40/20/20 cap to replace my existing 40/40/20 cap. Since this has one more pole than what I need, should I connect the unused 20uf lead to ground or leave it open?
Asked by Anonymous on June 29th, 2020.
June 30th, 2020
Staff Member
You can leave the unused section disconnected.
1 answers
I am looking to replace a Seeburg Amp case that is a Mallory 40/450,40/450/20/400,20/400 with this unit and note that the temp rating is only 55C in this one, while original is 85C. How critical is that difference for this type of use?
Asked by Anonymous on January 21st, 2021.
January 28th, 2021
Staff Member
It is advised to get as close as possible to the original temperature rating as the original cap.
1 answers
Does the height dimension include the connection tabs?
Asked by Anonymous on February 1st, 2021.
February 3rd, 2021
Staff Member
The mounting tabs are not included in the 3" measurement.
Product Reviews
Perfect cap for the first two power nodes of a LAUB model26R (close design to a Magnatone 460). For the last two lower voltage power supply nodes in the LAUB, I used the 475 volt, 40/20/20/10 CE Mfg. cap which allows me to combine or separate the 20 uF and 10uF node for the initial preamp section. After forming these caps using a slow stepped voltage ramp-up process, the amp sounds amazing and now has more voltage protection compared to the original 450 volt multisection capacitors. These caps fit nicely on the LAUB chassis with plenty of clearance. I'll continue to use CE caps in my tube amps.
Absolutely wonderful. I had two remaining problems with my 1955 vintage Fisher console: slight hum on stronger AM/FM stations that got worse the longer you ran the unit and occasional dropout of audio high frequencies through its Jensen 2-way speaker.
Even though the 2 original capacitor cans had normal uf readings, it turns out they were hiding the effects of their age. When I installed these replacements the remaining problems disappeared completely. The audio quality is simply amazing! Pricey item but well worth the money and time.
Absolutely wonderful. I had two remaining problems with my 1955 vintage Fisher console: slight hum on stronger AM/FM stations that got worse the longer you ran the unit and occasional dropout of audio high frequencies through its Jensen 2-way speaker.
Even though the 2 original capacitor cans had normal uf readings, it turns out they were hiding the effects of their age. When I installed these replacements the remaining problems disappeared completely. The audio quality is simply amazing! Pricey item but well worth the money and time.
perfect classic replacement
I Restore and build vintage tube amplifiers and have probably purchased a dozen of these CE caps over the years. The capicitive values are always within the stated tolerance and I've never had a failure yet. If CE keeps making them, I'll keep buying them Thanks. I
The CE Mfg capacitor was needed for my Fisher X-202-B amplifier. The cap fit as expected and is now installed and working in my Fisher amp. Thanks Antique Electronic Supply for having, and stocking the exact replacement part for my Fisher amp. It's still working and providing a wonderful sound for my collection of vinyl records.
Purchased to replace the original filter cap in a Fisher A600 stereo. Perfect fit and a 525 volt rating too
I have used this cap when restoring several old stereo amplifiers. Great choice for an Eico ST-40, some Heathkits, and the Fisher X-100 amps. Size is the same as the original and electrically better. I'll buy more when I need another. Thanks to CE for manufacturing them and AES for stocking them.
Fit , and func. Very good.
Fit , and func. Very good.