Capacitor - CE Mfg., 525V, 80/40/30/20µF
CE Manufacturing USA Made Multi Section Can Capacitor. Reproduced To Exact Mallory Specs Using Original Mallory Machinery.
- 80/40/30/20uF 525VDC.
- FP / Twist Lock Style. Solder Tabs.
- -10%, +50% Tolerance, 55°C Temperature Rating.
- 1-⅜" Dia. X 3-½" H.
Great replacement for the can capacitor in the Princeton 6G2.
|Bottom Diameter||1.46 in.|
|Item Height||3.6 in.|
|Rated Voltage||525 V|
|Section 1 Capacitance||80 μF|
|Section 2 Capacitance||40 μF|
|Section 3 Capacitance||30 μF|
|Section 4 Capacitance||20 μF|
|Tab Type||solder tabs|
|Packaging Dimensions||4 in. × 1.5 in. × 1.5 in.|
|Weight (Packaging)||0.235 lbs.|
My Project Lists
Questions and Answers
Click each question to see its answers.
2 answers I need a 80-40-40 mfd 150v 40mfd 25v. Will this work for me? Thank You
Asked by David Feller on April 18th, 2018.
If you only need three sections, connecting the 20uf section in parallel with the 30uf section yields a combined capacitance of 50uf.
1 answers I'm looking for a 100 uf/500v 30uf/450 volt cap. Other than the Capacitor - Multi-section, 80/40/30/20 µF 525 VDC, is there anything that is a better fit? Thanks Dan
Asked by dbrostoff on May 23rd, 2016.
This will probably be your best option. We have a 100/100 @ 500 but that would leave you with a much higher value on the 30uF side. You can combine sections on the 80/40/30/20 or you can also run individual caps under the chassis and leave the bad can in the unit for aesthetic purposes.
1 answers Do these caps come already charged, or do they need to be "formed"?
Asked by Anonymous on July 19th, 2017.
1 answers I need 80/40/20 uf, 450 v. Will this setup work for me? How do I bypass the 30 uf capacitor? Thank you, Bryan.
Asked by Anonymous on December 4th, 2017.
1 answers Need to know the spacing of the twist lock tabs. Otherwise this should work electrically. Will be installing on a Fisher 50-A monoblock. Richard
Asked by Anonymous on August 2nd, 2018.
The twist lock tabs are .18" in diameter and each adjacent tab is .59" apart. Also, the tabs are about 1.08" apart from each other going from one end of the cap to the other.
Customers who purchased this item also bought
- Capacitor - Mod® Electronics, Aluminum Electrolytic, 105°C, Axial Lead
- Capacitor - 630V, Polypropylene, axial leads
- Resistors - 2 Watt, Metal Oxide, Power
- Capacitor - 600V, 715P Series, Polypropylene
- Capacitor - Solen, 630V, Metalized Polypropylene, "Fast"
- Capacitor - Sprague Atom, Aluminum Electrolytic
This series of multi-section can capacitors is great for their physical compatibility with the older capacitors they replace. They drop right in. Good selection of values, and each one has functioned perfectly in-circuit
Like everyone says, its a perfect fit for the Dynakit 70 and sounds great. Just make sure as Bob Latino says that you put the 80 cap in the back. As it turns out I was lucky to get it in when I did. The old can was bulging and soon to fail.
Fit my Dynaco ST70 amp perfectly.
this is an awesome upgrade to my ST-70's
Quad capacitor fit perfectly into my Dyanco ST70 that I am rebuilding. Used this version for the added capacitance over the original version. Works like a champ!
Capacitor dropped in perfectly in a Fisher 50-A for a customer. 525VDC rating is needed for today's higher line voltage. Wish the mechanical specs were available online w/o inquiring.
Perfect fit ty!
Always nice to have a reliable supply of good quality twist lock caps at a reasonable price. My McIntosh collectors appreciate my efforts to use parts similar to what McIntosh used in the sixties.
Works great! Perfect for giving the amp the extra headroom and low end grunt.