You are here

Capacitors

Capacitors are passive devices that are used in almost all electrical circuits for rectification, coupling and tuning. Also known as condensers, a capacitor is simply two electrical conductors separated by an insulating layer called a dielectric. The conductors are usually thin layers of aluminum foil, while the dielectric can be made up of many materials including paper, mylar, polypropylene, ceramic, mica, and even air. Electrolytic capacitors have a dielectric of aluminum oxide which is formed through the application of voltage after the capacitor is assembled.

Characteristics of different capacitors are determined by not only the material used for the conductors and dielectric, but also by the thickness and physical spacing of the components.

Filter these results

Pages

(17 pages)
C-EC60401025Capacitor - CE Mfg., 60µF@525V, 40@525, 10@450, 25@50

Capacitor - Electrolytic, 60/525, 40/525, 10/450, 25/50


$36.70
Click to read more
SET-CAP-MARSHALL-003Cap Set - for Marshall JCM800 2204, 4010, 4104 (50W Volume)
Package of 5
Replacement electrolytic capacitor set.
Basic set includes:
  • (3) C-EC50-50-500CE
  • (2) C-ET10-160
Premium set includes:
  • (3) C-EC50-50-500FT (F&T)
  • (2) C-SA10-150 (Sprague Atom)
Warning: Some electrolytic capacitors can store charge even after the amp has been turned off and unplugged for some time. Always make sure your original electrolytic capacitors do not have a voltage present before touching them.
Starting at $25.85
Click to read more
C-EC50-30-30-10Capacitor - CE Mfg., 50µF@300V, 30µF@25V x2, 10µF@350V

Multi-section twist lock capacitor, four sections - 50uF @ 300 VDC, 30uF @ 25 VDC, 30uF @ 25 VDC and 10uF @ 350 VDC. Manufactured to Mallory specs on original Mallory machinery.


$40.90
Click to read more
C-ER47-47-160Capacitor - CE Mfg., 160V, 47/47µF, Electrolytic

CE Manufacturing multi-section electrolytic "Firecracker" style capacitor (modern polarized electrolytic caps in a tube for a vintage look). 47/47 µF ±20% @ 160 VDC. 7/8" diameter x 2-¾" length. Includes zip-tie and mount square. Great for antique radio restoration. Three wires (Red, Red, Black):



  • Red to Black = 47 µF

$8.95
Click to read more
C-D-100VCapacitor - 100V, Ceramic Disc, ± 10%
± 10% tolerance.
Starting at $0.20
On Backorder
Click to read more
C-EC16-16-500Capacitor - JJ Electronics, 500V, 16/16µF, Electrolytic

JJ Electronics aluminum electrolytic capacitor. Low impedance, low ESR, wide frequency range. For power supplies, high-end exlectronics, and industrial electronics.



  • Rated voltage: 16/16µF
  • Operating temperature: -25°C - 70°C
  • Rated voltage: 500VDC
  • Capacitance tolerance (at 100Hz, 20°C): -10% + 30%
  • Dissipation factor (at 100Hz, 20°C): 0.15 - 0.25


The aluminum case capacitors are supplied with PVC sleeve insulation and a safety vent located on end deck. Load life is 1000 hours (at maximum operating temperature, rated voltage, and AC current load)


$8.25
Click to read more
C-EC40X4-525-PCCapacitor - CE, 40/40/40/40µF, 525VDC, Electrolytic, PC Mount
  • CE Manufacturing USA Made Multi Section Can Capacitor. Reproduced To Exact Mallory Specs Using Original Mallory Machinery.
  • 40/40/40/40uF 525VDC.
  • FP / Twist Lock Style. PCB Mount.
  • -10%, +50% Tolerance, 55°C Temperature Rating.
  • 1-⅜" Dia. X 3-½" H.

$40.90
Click to read more
C-EC20-10-10-10Capacitor - CE Mfg., 450V, 20/10/10/10 µF
CE Manufacturing USA Made Multi Section Can Capacitor. Reproduced to exact Mallory specs using original Mallory machinery.

  • 20/10/10/10uF 450VDC. Used In Dynaco PAM-1 Preamplifiers. This is not a standard design of FP Cap, as the 20 Mfd is B(lank). Standard rolling would be D(iamond) as the high cap section.*
  • FP / Twist lock style, Solder tabs.
  • -10%, +50% Tolerance
  • 85°C temperature rating.
  • 1 3/8"D X 2 1/2"H.


*C-EC20-10-10-10 does contain all four values. This note is indicating that the four tabs for each capacitor section are not marked according to the standard method. The three 10 uF section are marked by D, square and triangle. The one 20 uF section is not marked with a symbol (i.e. blank).
$38.80
Click to read more
C-D-6000VCapacitor - 6000V, Ceramic Disc, ± 10%
Ceramic disc capacitors rated for up to 6kV, 10% tolerance.
Starting at $0.55
Click to read more
C-EC40-40-30-20-400Capacitor - CE Mfg., 400V, 40/40/30/20µF, Electrolytic

CE Manufacturing USA Made Multi Section Can Capacitor. Reproduced To Exact Mallory Specs Using Original Mallory Machinery.



  • 40/40/30/20uF 400VDC Electrolytic.
  • FP / Twist Lock Style. Solder Lugs.
  • -10%, +50% Tolerance, 65°C Temperature Rating.
  • 1 3/8"D X 2"H.


Great replacement for the Echoplex EP-1.


All CE manufactured can capacitors have a two year warranty against manufactured defects.

$40.90
Click to read more

Pages

(17 pages)
Don't see a product you're looking for? Send us your product suggestions!
Subscribe to RSS - Capacitors