You are here

Capacitors

Capacitors are passive devices that are used in almost all electrical circuits for rectification, coupling and tuning. Also known as condensers, a capacitor is simply two electrical conductors separated by an insulating layer called a dielectric. The conductors are usually thin layers of aluminum foil, while the dielectric can be made up of many materials including paper, mylar, polypropylene, ceramic, mica, and even air. Electrolytic capacitors have a dielectric of aluminum oxide which is formed through the application of voltage after the capacitor is assembled.

Characteristics of different capacitors are determined by not only the material used for the conductors and dielectric, but also by the thickness and physical spacing of the components.

Filter these results
Sort By:
products per page
View Mode: List View · Grid View

Pages

(10 pages)
C-EC100-100-500Capacitor - CE Mfg., 500V, 100/100µF
  • CE Manufacturing USA Made Multi Section Can Capacitor. Reproduced To Exact Mallory Specs Using Original Mallory Machinery
  • 100/100uF - 500VDC Electrolytic
  • FP / Twist Lock Style. Solder Tabs
  • -10%, +50% Tolerance, 55°C Temperature Rating
  • 1 3/8"D X 4"H

$40.90
Click to read more
C-EC100-385Capacitor - JJ Electronics, 385V, 100µF, Electrolytic

JJ Electronic single-section electrolytic can capacitor, 100 µF -10%+30% @ 385 V, 7/8" diameter x 1 5/8" height (22 x 42 mm). Snap-in PC mount terminals. Excellent for music industry applications.



  • Rated Capacitance: 100 µF
  • Rated Voltage: 385 V
  • max. tanδ at 100Hz, 20° C: 0,15
  • Iac: 450 mA

$7.35
Click to read more
C-EC100-40-450Capacitor - CE Mfg., 450V, 100/40µF, Electrolytic
CE Manufacturing USA-made Multi Section Can Capacitor. Reproduced To Exact Mallory Specs Using Original Mallory Machinery.
100/40µF 450VDC
FP / Twist Lock Style. Solder Tabs.
-10%, +50% Tolerance, 85°C Temperature Rating.
$40.90
Click to read more
C-EC100X2-500Capacitor - JJ Electronics, 500V, 100/100µF, Electrolytic

Same diameter as LCR. Great for use in Marshall amplifiers. 1-3/8" dia. x 2 7/8" height. S-H122 is a good mounting clamp for this can.



  • Rated Capacitance: 100+100 µF
  • Rated Voltage: 500 V
  • max. tanδ at 100Hz, 20° C: 0,20
  • Iac: 410+410 mA

$11.50
Click to read more
C-EC1015X3-450Capacitor - CE Mfg., 450V, 15/15/15/10µF, Electrolytic
CE Manufacturing USA-made Multi Section Can Capacitor. Reproduced To Exact Mallory Specs Using Original Mallory Machinery.
  • 15/15/15/10 µF 450VDC
  • -FP / Twist Lock Style. Solder Tabs.
  • -10%, +50% Tolerance
  • -85°C Temperature Rating.
  • -1 ⅜"D X 2 ½"H.
$39.95
Click to read more
C-EC1020X3-450Capacitor - CE Mfg., 450V, 20/20/20/10µF, Electrolytic
  • CE Manufacturing USA Made Multi Section Can Capacitor. Reproduced To Exact Mallory Specs Using Original Mallory Machinery.
  • 20/20/20/10uF 450VDC.
  • FP / Twist Lock Style. Solder Tabs.
  • -10%, +50% Tolerance, 85°C Temperature Rating.

$30.50
Click to read more
C-EC10X4-450Capacitor - CE Mfg., 450V, 10/10/10/10µF, Electrolytic
  • CE Manufacturing USA Made Multi Section Can Capacitor. Reproduced To Exact Mallory Specs Using Original Mallory Machinery.
  • 10/10/10/10uF 450VDC.
  • FP / Twist Lock Style. Solder Tabs.
  • -10%, +50% Tolerance, 85°C Temperature Rating.

$31.45
Click to read more
C-EC16-16-500Capacitor - JJ Electronics, 500V, 16/16µF, Electrolytic

JJ Electronics aluminum electrolytic capacitor. Low impedance, low ESR, wide frequency range. For power supplies, high-end exlectronics, and industrial electronics.



  • Rated voltage: 16/16µF
  • Operating temperature: -25°C - 70°C
  • Rated voltage: 500VDC
  • Capacitance tolerance (at 100Hz, 20°C): -10% + 30%
  • Dissipation factor (at 100Hz, 20°C): 0.15 - 0.25


The aluminum case capacitors are supplied with PVC sleeve insulation and a safety vent located on end deck. Load life is 1000 hours (at maximum operating temperature, rated voltage, and AC current load)


$8.25
Click to read more
C-EC20-10-10-10Capacitor - CE Mfg., 450V, 20/10/10/10µF
  • CE Manufacturing USA Made Multi Section Can Capacitor. Reproduced to exact Mallory specs using original Mallory machinery.
  • 20/10/10/10uF 450VDC. Used In Dynaco PAM-1 Preamplifiers. This is not a standard design of FP Cap, as the 20 Mfd is B(lank). Standard rolling would be D(iamond) as the high cap section.*
  • FP / Twist lock style, Solder tabs.
  • -10%, +50% Tolerance
  • 85°C temperature rating.
  • 1 3/8"D X 2 ½"H.


*C-EC20-10-10-10 does contain all four values.


$38.80
Click to read more
C-EC2010X2-475Capacitor - CE Mfg., 475V, 20/20/10/10µF, Electrolytic

Made in the USA on Mallory's original machinery.



  • 4 sections - (2) 20μF at 475V and (2) 10μF at 475V
  • -10%, +50% tolerance
  • 55° temperature rating
  • 1-3/8" diameter x 3" tall

$36.70
Click to read more

Pages

(10 pages)
Don't see a product you're looking for? Send us your product suggestions!
Subscribe to RSS - Capacitors