You are here

Capacitors

Capacitors are passive devices that are used in almost all electrical circuits for rectification, coupling and tuning. Also known as condensers, a capacitor is simply two electrical conductors separated by an insulating layer called a dielectric. The conductors are usually thin layers of aluminum foil, while the dielectric can be made up of many materials including paper, mylar, polypropylene, ceramic, mica, and even air. Electrolytic capacitors have a dielectric of aluminum oxide which is formed through the application of voltage after the capacitor is assembled.

Characteristics of different capacitors are determined by not only the material used for the conductors and dielectric, but also by the thickness and physical spacing of the components.

Filter these results
Sort By:
products per page
View Mode: List View · Grid View
C-PFD1-50-RCapacitor - 50V, 0.1µF, Used In Pedal Kits

Polyester Film Capacitor used in MOD® Pedal Kits. Rated at 0.1µF 50V. Tolerance: 10%. Operating temperature: -40 C to +85 C


$1.05
$0.93
You save: 11%
Click to read more
C-PFD047-50-RCapacitor - 50V, 0.047µF, Used In Pedal Kits

Polyester Film Capacitor used in MOD® Pedal Kits. Rated at 0.047µF 50V. Tolerance: 10%. Operating temperature: -40 C to +85 C


$1.00
$0.89
You save: 11%
Click to read more
C-U-630VCapacitor - 630V, Polypropylene, axial leads

± 10% tolerance. Rated to 105°C. Non-inductive, axial lead capacitor with self healing windings. Polypropylene film capacitor. Made by Illinois Capacitor. Capacitance SKU Original Part Number Dimensions .001 µF C-UD001-630 102K630V 0.25" x 0.58" .0022 µF C-UD0022-630 222K630V 0.25" x 0.58" .0033 µF C-UD0033-630 332K630V 0.25" x 0.58" .01 µF C-UD01-630 103K630V 0.26" x 0.58" .022 µF C-UD022-630 223K630V 0.34" x 0.58" .047 µF C-UD047-630 473K630V 0.36" x 0.81" .1 µF C-UD1-630 104K630V 0.42" x 1.15" .22 µF C-UD22-630 224K630V 0.50" x 1.34" .47 µF C-UD47-630 474K630V 0.71" x 1.34"


$0.75
Starting at $0.67
You save: 11%
Click to read more
C-UD0033-400Capacitor - 400V, Polypropylene, Axial Leads, .0033 uF

General purpose polypropylene film capacitor.



  • Dissipation Factor: 0.001 Max at 1000 Hz and 25°C , 0.004 Max at 10 kHz and 25°C
  • Temperature Coefficient: -200 PPM/°C: -100 PPM/°C, 100 PPM/°C
  • ESR: 53.588 Ohms at 1 kHz and 20°C
  • Self Inductance: 1 Nanohenries maximum per mm of body length and lead length
  • dvdt: 15 V/µs
  • Tolerance: -10 % , +10 %
  • Temperature Range: -55°C to +105°C
    • Above 85°C the rated (DC/AC) voltage must be derated at per 1.25%°C
  • WVDC: 400 Volts DC
  • VAC: 220 Volts AC
  • Terminal to Terminal Dielectric strength: 1.6 times the rated DC voltage when applied between the terminals for 2 seconds
  • Terminal to case Dielectric strength: 2 VAC when applied between the terminals and case for 2~5 seconds
  • Insulation Resistance (Terminal to Terminal): 30000 MINIMUM after 100 Volts DC is applied for 60 seconds at 20°C
  • Insulation resistance (Termi

$0.69
$0.61
You save: 12%
Click to read more
C-PEICapacitor - 100V, Polyester Film Inductive
Package of 5

Polyester film dielectric, aluminum foil electrode, copperply leads and epoxy resin coating in inductive type.



  • Small size, light weight and low cost
  • Dissipation factor is small because the leads are directly welded to electrodes
  • Epoxy resin vacuum-dipped enhances the mechanical strength, humidity resistance
  • 100 volt rating
  • Operating temperature range: -40°C to +85°C.
  • Package of 5

$0.45
Starting at $0.40
You save: 11%
Click to read more
C-T-630VCapacitor - 630V, Metal Film, Tubular

± 10% tolerance. Non-inductive self healing windings. Polyester film axial lead capacitor. 630 Volts.


$0.44
Starting at $0.39
You save: 11%
Click to read more
C-T-400VCapacitor - 400V, Metal Film, ± 10%

± 10% tolerance. Non-inductive self healing windings. Polyester film axial lead capacitor. 400 Volts.


Starting at $0.36
Click to read more
Don't see a product you're looking for? Send us your product suggestions!
Subscribe to RSS - Capacitors