Capacitors

Capacitors are passive devices that are used in almost all electrical circuits for rectification, coupling and tuning. Also known as condensers, a capacitor is simply two electrical conductors separated by an insulating layer called a dielectric. The conductors are usually thin layers of aluminum foil, while the dielectric can be made up of many materials including paper, mylar, polypropylene, ceramic, mica, and even air. Electrolytic capacitors have a dielectric of aluminum oxide which is formed through the application of voltage after the capacitor is assembled. Characteristics of different capacitors are determined by not only the material used for the conductors and dielectric, but also by the thickness and physical spacing of the components.
Capacitor - CE Mfg., 475V, 20/20/10/10µF, Electrolytic
Made in the USA on Mallory's original machinery.
  • 4 sections - (2) 20μF at 475V and (2) 10μF at 475V
  • -10%, +50% tolerance
  • 65° temperature rating
  • 1-3/8" diameter x 3" tall
$36.95
Capacitor - CE Mfg., 525V, 20/20/20µF
CE Manufacturing USA Made Multi Section Can Capacitor. Reproduced To Exact Mallory Specs Using Original Mallory Machinery.
  • 20/20/20uF 525VDC. FP / Twist Lock Style. Solder Tabs.
  • -10%, +50% Tolerance, 55°C Temperature Rating.
  • 1 3/8"D X 3"H.

Note: This 3-section capacitor is in a 4-section case. A 4-section insulator such as S-H120 should be used with this capacitor, rather than a 3-section insulator.
$38.95
Capacitor - CE Mfg., 475V, 30/30/30/30µF, Electrolytic
Made in the USA on Mallory's original machinery.
  • 4 sections - 30µF all at 475V
  • -10%, +50% tolerance
  • 65° temperature rating
  • 1-3/8" diameter x 2-5/8" tall
$37.95
Capacitor - CE Mfg., 450V, 40/40/40/40µF, Electrolytic
CE Manufacturing USA made multi section can capacitor. Reproduced to Mallory specs using original Mallory machinery. 85°C temperature rating.
$38.95
Capacitor - JJ Electronics, 385V, 350µF, Electrolytic
JJ Electronic single-section electrolytic can capacitor, 350 µF -10%+30% @ 385 V, 1 3/8" diameter x 2" height (35 x 50 mm). Clamp mount, solder lug terminals. Excellent for music industry applications
$11.95
Capacitor - JJ Electronics, 500V, 16/16µF, Electrolytic
JJ Electronics aluminum electrolytic capacitor. Low impedance, low ESR, wide frequency range. For power supplies, high-end exlectronics, and industrial electronics.
  • Rated voltage: 16/16µF
  • Operating temperature: -25°C - 70°C
  • Rated voltage: 500VDC
  • Capacitance tolerance (at 100Hz, 20°C): -10% + 30%
  • Dissipation factor (at 100Hz, 20°C): 0.15 - 0.25

The aluminum case capacitors are supplied with PVC sleeve insulation and a safety vent located on end deck. Load life is 1000 hours (at maximum operating temperature, rated voltage, and AC current load)
$9.95
Capacitor - CE Mfg., 450V, 40/40/30/30µF, Electrolytic
CE Manufacturing USA Made Multi Section Can Capacitor. Reproduced To Exact Mallory Specs Using Original Mallory Machinery.
  • 40/40/30/30 uF 450VDC. FP / Twist Lock Style. Solder Tabs.
  • -10%, +50% Tolerance, 85°C Temperature Rating.
  • 1 ⅜"D X 3"H
$40.95
Capacitor - CE Mfg., 250 V, 150/80/80/50 μF
CE Manufacturing USA Made Multi Section Can Capacitor. Reproduced To Exact Mallory Specs Using Original Mallory Machinery.
  • 150/80/80/50 250VDC.
  • FP / Twist Lock Style. Solder Tabs.
  • -10%, +50% Tolerance, 85°C Temperature Rating.
  • 1 ⅜"D X 3"H.

All CE Manufacturing can capacitors have a two year warranty against manufacturer defects.
$36.95
Capacitor - CE Mfg., 450V, 10/10/10/10µF, Electrolytic
CE Manufacturing USA Made Multi Section Can Capacitor. Reproduced To Exact Mallory Specs Using Original Mallory Machinery.
  • 10/10/10/10uF 450VDC.
  • FP / Twist Lock Style. Solder Tabs.
  • -10%, +50% Tolerance, 85°C Temperature Rating.
$36.95
Capacitor - CE Mfg., 475V, 40/20/20/10µF
CE Manufacturing USA Made Multi Section Can Capacitor. Reproduced To Exact Mallory Specs Using Original Mallory Machinery. 40/20/20/10 capacitors like this can be found in Seeburg HF-R & HF-J jukebox amplifiers.
  • 40/20/20/10uF 475VDC Electrolytic.
  • FP / Twist Lock Style. Solder Tabs.
  • -10%, +50% Tolerance, 65°C Temperature Rating.
  • 1 ⅜"D X 2 ½"H.
  • All CE manufactured can capacitors have a two year warranty against manufactured defects.
$36.95
Capacitor - 500V, 32/32µF, Electrolytic
This low ripple capacitor tests superior to any other capacitor of its value currently being made. Commonly used as filter capacitors in guitar amps. 32μF + 32μF @ 500VDC. 1-3/8" dia. x 2" tall. Requires clamp - S-H122. Replacement for LCR. The common negative terminal is dotted.
$7.95
Capacitor - CE Mfg., 525V, 30/30/30 μF
CE Manufacturing USA Made Multi Section Can Capacitor. Reproduced To Exact Mallory Specs Using Original Mallory Machinery.
  • 30/30/30uF 525VDC Electrolytic.
  • FP / Twist Lock Style. Solder Tabs.
  • -10%, +50% Tolerance, 55°C Temperature Rating.
  • 1 3/8"D X 3"H.
$38.95
Capacitor - CE Mfg., 450V, 20/20/20/10µF, Electrolytic
CE Manufacturing USA Made Multi Section Can Capacitor. Reproduced To Exact Mallory Specs Using Original Mallory Machinery.
  • 20/20/20/10uF 450VDC.
  • FP / Twist Lock Style. Solder Tabs.
  • -10%, +50% Tolerance, 85°C Temperature Rating.
$36.95
Capacitor - CE Mfg., 350V, 80/50/20/20µF, Electrolytic
Made in the USA on Mallory's original machinery. Used in Marantz 10B tuner.
$38.95
Capacitor - CE Mfg., 525V, 30/30/20 μF
CE Manufacturing USA Made Multi section Can Capacitor. Reproduced To Exact Mallory Specs Using Original Mallory Machinery.
  • 30/30/20uF 525VDC Electrolytic.
  • FP / Twist Lock Style. Solder Tabs.
  • -10%, +50% Tolerance, 55°C Temperature Rating.
  • 1 ⅜"D X 3"H.
$38.95
Capacitor - CE Mfg., 60µF@525V, 40@525, 10@450, 25@50
Capacitor - Electrolytic, 60/525, 40/525, 10/450, 25/50
$36.95
Capacitor - CE Mfg., 450V, 20/10/10/10 µF
CE Manufacturing USA Made Multi Section Can Capacitor. Reproduced to exact Mallory specs using original Mallory machinery.
  • 20/10/10/10uF 450VDC. Used In Dynaco PAM-1 Preamplifiers. This is not a standard design of FP Cap, as the 20 Mfd is B(lank). Standard rolling would be D(iamond) as the high cap section.*
  • FP / Twist lock style, Solder tabs.
  • -10%, +50% Tolerance
  • 85°C temperature rating.
  • 1 3/8"D X 2 1/2"H.

*C-EC20-10-10-10 does contain all four values. This note is indicating that the four tabs for each capacitor section are not marked according to the standard method. The three 10 uF section are marked by D, square and triangle. The one 20 uF section is not marked with a symbol (i.e. blank).
$37.95
Capacitor - CE Mfg., 450V, 80/40/40µF
CE Manufacturing USA Made Multi Section Can Capacitor. Reproduced To Exact Mallory Specs Using Original Mallory Machinery
  • 80/40/40uF - 450VDC Electrolytic
  • FP / Twist Lock Style. Solder Tabs
  • -10%, +50% Tolerance, 55°C Temperature Rating
  • 1 ⅜"D X 4"H
$36.95
Capacitor - CE Mfg., 500V, ~\frac{50}{50}~ μF
CE Manufacturing USA Made Multi Section Can Capacitor. Reproduced to exact Mallory specs using original Mallory machinery.
  • 50µF@500V, 50µF@500V
  • FP / Twist Lock Style. Solder Tabs.
  • -10%, +50% Tolerance, 55°C Temperature Rating.
  • 1 ⅜"D X 2 1”H.

All CE Manufacturing can capacitors have a two year warranty against manufactured defects.
$40.95
Capacitor - CE Mfg., 200V, 100/100/100µF, Electrolytic
Made in the USA on Mallory's original machinery. Used in Marantz 10B tuner.
$38.95
Capacitor - CE Mfg., 500V, 30/30µF, Electrolytic
Reproduced To Exact Mallory Specs Using Original Mallory Machinery. 30/30uF 500VDC Electrolytic. FP / Twist Lock Style. Solder Lugs. -10%, +50% Tolerance, 55°C Temperature Rating. 1 3/8"D X 2 1/2"H.
$36.95
Capacitor - CE Mfg., 40µF/500V, 40µF/450V, 40µF/400V, 20µF/300V
CE Manufacturing USA Made Multi Section Can Capacitor. Reproduced To Exact Mallory Specs Using Original Mallory Machinery. This cap is used in the Fisher 500 C amplifier (capacitor C91).
  • 40uF@500V, 40uF@450V, 40uF@400V, 20uF@300V.
  • FP / Twist Lock Style. Solder Tabs.
  • -10%, +50% Tolerance, 85°C Temperature Rating.
  • 1 ⅜"D X 3"H.
$36.95
Capacitor - CE Mfg., 400 V, 60/40/40/40 μF
CE Manufacturing USA Made Multi Section Can Capacitor. Reproduced To Exact Mallory Specs Using Original Mallory Machinery.
  • 60/40/40/40uF 400VDC.
  • FP / Twist Lock Style. Solder Tabs.
  • -10%, +50% Tolerance, 85°C Temperature Rating.
  • 1 3/8"D X 3.6"H.

All CE manufactured can capacitors have a two year warranty against manufactured defects.
$40.95
Capacitor - CE Manufacturing, 2x 40µF/450V, 2x 25µF/50V
CE Manufacturing USA Made Multi Section Can Capacitor. Reproduced To Exact Mallory Specs Using Original Mallory Machinery. 40uF @ 450V, 40uF @ 450V, 25uF @ 50V, 25uF @ 50V. FP / Twist Lock Style. Solder Tabs.
$38.95