1. Home
  2. Products
  3. Capacitors

Capacitors

Capacitors are passive devices that are used in almost all electrical circuits for rectification, coupling and tuning. Also known as condensers, a capacitor is simply two electrical conductors separated by an insulating layer called a dielectric. The conductors are usually thin layers of aluminum foil, while the dielectric can be made up of many materials including paper, mylar, polypropylene, ceramic, mica, and even air. Electrolytic capacitors have a dielectric of aluminum oxide which is formed through the application of voltage after the capacitor is assembled. Characteristics of different capacitors are determined by not only the material used for the conductors and dielectric, but also by the thickness and physical spacing of the components.

Multi-Section / Can Type

Multi-Section Can Capacitors can contain either 1,2,3 or 4 separate capacitor sections in one can. The sections can have various capacitance values & multi-voltage cans can also have various voltages for each section as well.
products per page
C-EC50-50-500CE
Capacitor - 500V, 50/50μF, Electrolytic
This low ripple capacitor tests superior to any other capacitor of its value currently being made. Commonly used as filter capacitors in guitar amps. 50 μF + 50 μF @ 500 VDC. 1 3/8" diameter x 2 3/16" tall. Requires clamp - S-H122. Replacement for LCR. The common negative terminal is dotted.
$9.25
C-EC40-20-20
Capacitor - CE Mfg., 500V, 40/20/20 μF
CE Manufacturing USA Made Multi Section Can Capacitor. Reproduced To Exact Mallory Specs Using Original Mallory Machinery.
  • 40/20/20uF 500VDC Electrolytic.
  • FP / Twist Lock Style. Solder Tabs.
  • -10%, +50% Tolerance, 55°C Temperature Rating.
  • 1 3/8"D X 2 1/2"H.
$38.95
C-EC100-100-500
Capacitor - CE Mfg., 500V, 100/100µF
CE Manufacturing USA Made Multi Section Can Capacitor. Reproduced To Exact Mallory Specs Using Original Mallory Machinery
  • 100/100uF - 500VDC Electrolytic
  • FP / Twist Lock Style. Solder Tabs
  • -10%, +50% Tolerance, 55°C Temperature Rating
  • 1 ⅜"D X 4"H
$40.95
C-EC32-32-500
Capacitor - JJ Electronics, 500V, 32/32μF, Electrolytic
Same diameter as LCR. Great for use in Marshall amplifiers. 1-3/8" dia. x 2" long
$9.95
C-EC100X2-500
Capacitor - JJ Electronics, 500V, 100/100µF, Electrolytic
Same diameter as LCR. Great for use in Marshall amplifiers. 1-3/8" dia. x 2 7/8" height. S-H122 is a good mounting clamp for this can
$12.95
C-EC50-50-500
Capacitor - JJ Electronics, 500V, 50/50µF, Electrolytic
Same diameter as LCR. Great for use in Marshall amplifiers. 1-3/8" diameter x 2" tall. S-H122 is a good mounting clamp for this can
$10.95
C-EC30-20X3-525
Capacitor - CE Mfg., 525V, 30/20/20/20 μF
CE Manufacturing USA Made Multi section Can Capacitor. Reproduced To Exact Mallory Specs Using Original Mallory Machinery.
  • 30/20/20/20uF 525VDC Electrolytic. Used In Dyanaco ST-70 Amplifiers.
  • FP / Twist Lock Style. Solder Tabs.
  • -10%, +50% Tolerance, 55°C Temperature Rating.
  • 1 ⅜"D X 3 1/2"H.
$40.95
C-EC30X3-525
Capacitor - CE Mfg., 525V, 30/30/30 μF
CE Manufacturing USA Made Multi Section Can Capacitor. Reproduced To Exact Mallory Specs Using Original Mallory Machinery.
  • 30/30/30uF 525VDC Electrolytic.
  • FP / Twist Lock Style. Solder Tabs.
  • -10%, +50% Tolerance, 55°C Temperature Rating.
  • 1 3/8"D X 3"H.
$38.95
C-EC40X3-525
Capacitor - CE Mfg., 525 V, 40/40/40 μF
CE Manufacturing USA Made Multi Section Can Capacitor. Reproduced To Exact Mallory Specs Using Original Mallory Machinery.
  • 40/40/40uF 525VDC.
  • FP / Twist Lock Style. Solder Tabs.
  • -10%, +50% Tolerance, 55°C Temperature Rating.
  • 1 3/8"D X 3"H.

All CE manufactured can capacitors have a two year warranty against manufactured defects.
$40.95
C-EC20X3-525
Capacitor - CE Mfg., 525V, 20/20/20µF
CE Manufacturing USA Made Multi Section Can Capacitor. Reproduced To Exact Mallory Specs Using Original Mallory Machinery.
  • 20/20/20uF 525VDC. FP / Twist Lock Style. Solder Tabs.
  • -10%, +50% Tolerance, 55°C Temperature Rating.
  • 1 3/8"D X 3"H.

Note: This 3-section capacitor is in a 4-section case. A 4-section insulator such as S-H120 should be used with this capacitor, rather than a 3-section insulator.
$38.95
C-EC40-20X3-525
Capacitor - CE Mfg., 525V, 40/20/20/20µF
CE Manufacturing USA Made Multi Section Can Capacitor. Reproduced To Exact Mallory Specs Using Original Mallory Machinery.
  • 40/20/20/20uF 525VDC Electrolytic.
  • FP / Twist Lock Style. Solder Tabs.
  • -10%, +50% Tolerance, 55°C Temperature Rating.
  • 1 ⅜"D X 2 1/2"H.

All CE manufactured can capacitors have a two year warranty against manufactured defects.
$40.95
C-EC80-40-30-20
Capacitor - CE Mfg., 525V, 80/40/30/20µF
CE Manufacturing USA Made Multi Section Can Capacitor. Reproduced To Exact Mallory Specs Using Original Mallory Machinery.
  • 80/40/30/20uF 525VDC.
  • FP / Twist Lock Style. Solder Tabs.
  • -10%, +50% Tolerance, 55°C Temperature Rating.
  • 1-3/8" Dia. X 3-1/2" H.

Great replacement for the can capacitor in the Princeton 6G2.
$43.95
C-EC4020X2-525
Capacitor - CE Mfg., 525V, 40/40/20/20 μF
CE Manufacturing USA made multi section can capacitor. Made to Mallory specs using original Mallory machinery.
$40.95
S-H121
Insulator - 3 Section, for FP Cap, 1.5" Mounting Centers
Phenolic insulator for mounting FP type can capacitors.
$1.50
S-H123
Capacitor Clamp - 1" diameter, for vertical mounting
Clamp for mounting electrolytic can capacitors in vertical position. Supplied with #6-32 screw and nut.
$2.70
S-H120M
Mounting Plate - Metal, for 1.375" Can Capacitor
Metal plate for mounting 4 section (1-3/8" diameter) FP type can capacitors.
$2.69
S-H128
Capacitor Clamp - 1.5" Diameter, for vertical mounting
Clamp for mounting electrolytic capacitor cans in vertical position. Supplied with #6-32 screw and nut. 1-½" diameter.
$2.65
S-H120
Insulator - 4 Section, for FP can capacitors
Phenolic insulator for mounting 4 section (1-3/8" diameter) FP type can capacitors.
$2.95
C-EC16-16-500
Capacitor - JJ Electronics, 500V, 16/16µF, Electrolytic
JJ Electronics aluminum electrolytic capacitor. Low impedance, low ESR, wide frequency range. For power supplies, high-end exlectronics, and industrial electronics.
  • Rated voltage: 16/16µF
  • Operating temperature: -25°C - 70°C
  • Rated voltage: 500VDC
  • Capacitance tolerance (at 100Hz, 20°C): -10% + 30%
  • Dissipation factor (at 100Hz, 20°C): 0.15 - 0.25

The aluminum case capacitors are supplied with PVC sleeve insulation and a safety vent located on end deck. Load life is 1000 hours (at maximum operating temperature, rated voltage, and AC current load)
$9.95
C-EC40-15-10-25
Capacitor - CE Mfg., 40µF@450V, 15µF@450V, 10µF@450V, 25@25
CE Manufacturing USA Made Multi Section Can Capacitor. Reproduced to exact Mallory specs using original Mallory machinery.
  • 40µF@450V, 15µF@450V, 10µF@450V, 25@25
  • FP / Twist Lock Style. Solder Tabs.
  • -10%, +50% Tolerance, 85°C Temperature Rating.
  • 1 ⅜"D X 2.6"H.

All CE Manufacturing can capacitors have a two year warranty against manufactured defects.
$36.95
C-EC25-50-150
Capacitor - CE Mfg., 150V, 25/50/150μF, Electrolytic
CE Manufacturing USA Made Multi Section Can Capacitor. Reproduced To Exact Mallory Specs Using Original Mallory Machinery.
  • 25/50/150uF 150VDC Electrolytic.
  • FP / Twist Lock Style. Solder Tabs.
  • -10%, +50% Tolerance, 85°C Temperature Rating.
  • 1 ⅜"D X 3"H.
$36.95
C-EC80-40-40
Capacitor - CE Mfg., 450V, 80/40/40µF
CE Manufacturing USA Made Multi Section Can Capacitor. Reproduced To Exact Mallory Specs Using Original Mallory Machinery
  • 80/40/40uF - 450VDC Electrolytic
  • FP / Twist Lock Style. Solder Tabs
  • -10%, +50% Tolerance, 55°C Temperature Rating
  • 1 ⅜"D X 4"H
$36.95
C-EC30-30-500
Capacitor - CE Mfg., 500V, 30/30µF, Electrolytic
Reproduced To Exact Mallory Specs Using Original Mallory Machinery. 30/30uF 500VDC Electrolytic. FP / Twist Lock Style. Solder Lugs. -10%, +50% Tolerance, 55°C Temperature Rating. 1 3/8"D X 2 1/2"H.
$36.95
C-EC50X2-500
Capacitor - CE Mfg., 500V, ~\frac{50}{50}~ μF
CE Manufacturing USA Made Multi Section Can Capacitor. Reproduced to exact Mallory specs using original Mallory machinery.
  • 50µF@500V, 50µF@500V
  • FP / Twist Lock Style. Solder Tabs.
  • -10%, +50% Tolerance, 55°C Temperature Rating.
  • 1 ⅜"D X 2 1”H.

All CE Manufacturing can capacitors have a two year warranty against manufactured defects.
$40.95