You are here

Capacitors

Capacitors are passive devices that are used in almost all electrical circuits for rectification, coupling and tuning. Also known as condensers, a capacitor is simply two electrical conductors separated by an insulating layer called a dielectric. The conductors are usually thin layers of aluminum foil, while the dielectric can be made up of many materials including paper, mylar, polypropylene, ceramic, mica, and even air. Electrolytic capacitors have a dielectric of aluminum oxide which is formed through the application of voltage after the capacitor is assembled.

Characteristics of different capacitors are determined by not only the material used for the conductors and dielectric, but also by the thickness and physical spacing of the components.

Filter these results

Pages

(16 pages)
C-EC100-40-450Capacitor - CE Mfg., 450V, 100/40µF, Electrolytic

CE Manufacturing USA-made Multi Section Can Capacitor. Reproduced To Exact Mallory Specs Using Original Mallory Machinery. 100/40µF 450VDC FP / Twist Lock Style. Solder Tabs. -10%, +50% Tolerance, 85°C Temperature Rating.


$40.90
Click to read more
SET-CAP-MARSHALL-003Cap Set - for Marshall JCM800 2204, 4010, 4104 (50W Volume)
Package of 5
Replacement electrolytic capacitor set.
Basic set includes:
  • (3) C-EC50-50-500CE
  • (2) C-ET10-160
Premium set includes:
  • (3) C-EC50-50-500FT (F&T)
  • (2) C-SA10-150 (Sprague Atom)
Warning: Some electrolytic capacitors can store charge even after the amp has been turned off and unplugged for some time. Always make sure your original electrolytic capacitors do not have a voltage present before touching them.
Starting at $25.85
Click to read more
C-EC32-32-500CECapacitor - 500V, 32/32µF, Electrolytic

This low ripple capacitor tests superior to any other capacitor of its value currently being made. Commonly used as filter capacitors in guitar amps. 32μF + 32μF @ 500VDC. 1-3/8" dia. x 2" tall. Requires clamp - S-H122. Replacement for LCR.


$7.50
Click to read more
C-EC50-30-30-10Capacitor - CE Mfg., 50µF@300V, 30µF@25V x2, 10µF@350V

Multi-section twist lock capacitor, four sections - 50uF @ 300 VDC, 30uF @ 25 VDC, 30uF @ 25 VDC and 10uF @ 350 VDC. Manufactured to Mallory specs on original Mallory machinery.


$40.90
Click to read more
SET-CAP-FENDER-009Cap Set - for Fender Vibro Champ AA764 (Black face)
Package of 5
Replacement electrolytic capacitor set.
Basic set includes:
  • (1) C-EC20X3-450
  • (3) C-ET25-25
  • (1) C-ET10-50
Premium set includes:
  • (1) C-EC20X3-450 (CE Manufacturing)
  • (3) C-SA25-25 (Sprague Atom)
  • (1) C-SA10-25 (Sprague Atom)
Warning: Some electrolytic capacitors can store charge even after the amp has been turned off and unplugged for some time. Always make sure your original electrolytic capacitors do not have a voltage present before touching them.
Starting at $38.80
Click to read more
SET-CAP-FENDER-003Cap Set - for Fender Champ 5F1 (Tweed)
Package of 4

Replacement electrolytic capacitor set.



Basic set includes closest generic values:



  • (1) C-ET22-450
  • (2) C-ET10-450
  • (1) C-ET25-25


Premium set includes:



  • (1) C-SA16-475 (Sprague Atom)
  • (2) C-SA8-450 (Sprague Atom)
  • (1) C-SA25-25 (Sprague Atom)


Warning: some electrolytic capacitors can store charge even after the amp has been turned off and unplugged for some time. Always make sure your original electrolytic capacitors do not have a voltage present before touching them.


Starting at $4.65
Click to read more
C-EC16-16-500Capacitor - JJ Electronics, 500V, 16/16µF, Electrolytic

JJ Electronics aluminum electrolytic capacitor. Low impedance, low ESR, wide frequency range. For power supplies, high-end exlectronics, and industrial electronics.



  • Rated voltage: 16/16µF
  • Operating temperature: -25°C - 70°C
  • Rated voltage: 500VDC
  • Capacitance tolerance (at 100Hz, 20°C): -10% + 30%
  • Dissipation factor (at 100Hz, 20°C): 0.15 - 0.25


The aluminum case capacitors are supplied with PVC sleeve insulation and a safety vent located on end deck. Load life is 1000 hours (at maximum operating temperature, rated voltage, and AC current load)


$8.25
Click to read more
SET-CAP-FENDER-008Cap Set - for Fender Twin Reverb AB763 (Black face)
Package of 13
Replacement electrolytic capacitor set.
Basic set includes:
  • (3) C-ET22-500-FT
  • (2) C-ET80-450-FT
  • (1) C-ET50-50
  • (7) C-ET25-25
Premium set includes:
  • (3) C-SA20-500 (Sprague Atom)
  • (2) C-SA80-450 (Sprague Atom)
  • (1) C-SA50-50 (Sprague Atom)
  • (7) C-SA25-25 (Sprague Atom)
Warning: Some electrolytic capacitors can store charge even after the amp has been turned off and unplugged for some time.
Starting at $28.00
Click to read more
C-EC40X4-525-PCCapacitor - CE, 40/40/40/40µF, 525VDC, Electrolytic, PC Mount
  • CE Manufacturing USA Made Multi Section Can Capacitor. Reproduced To Exact Mallory Specs Using Original Mallory Machinery.
  • 40/40/40/40uF 525VDC.
  • FP / Twist Lock Style. PCB Mount.
  • -10%, +50% Tolerance, 55°C Temperature Rating.
  • 1-⅜" Dia. X 3-½" H.

$40.90
Click to read more
C-EC220-385Capacitor - JJ Electronics, 385V, 220µF, Electrolytic
JJ Electronic single-section electrolytic can capacitor, 220 µF -10%+30% @ 385 V, 1-3/16" diameter x 2" height (30 x 50 mm). Snap-in PC mount terminals. Excellent for music industry applications.
$7.95
Click to read more

Pages

(16 pages)
Don't see a product you're looking for? Send us your product suggestions!
Subscribe to RSS - Capacitors