Capacitors

Illinois Capacitor Inc. high quality low leakage axial lead electrolytic capacitor

± 10% tolerance.

Ceramic disc capacitors rated for up to 6kV, 10% tolerance.

Clamp for mounting electrolytic capacitor cans in vertical position. Supplied with #6-32 screw and nut. 1-½" diameter.

Same diameter as LCR. Great for use in Marshall amplifiers. 1-3/8" dia. x 2 7/8" height. S-H122 is a good mounting clamp for this can

High quality low leakage axial lead electrolytic capacitor

• 70uF/100V
• Rated for 85° C operation
• Tolerance: -20%, +50%
• Measures 0.51" dia. x 0.84" length

CE Manufacturing USA Made Multi Section Can Capacitor. Reproduced To Exact Mallory Specs Using Original Mallory Machinery.

• 80/40/30/20uF 525VDC.
• FP / Twist Lock Style. Solder Tabs.
• -10%, +50% Tolerance, 55°C Temperature Rating.
• 1-3/8" Dia. X 3-1/2" H.

Great replacement for the can capacitor in the Princeton 6G2.

Axial electrolytic capacitor.

• Capacitance: 80µF
• Tolerance: ±20%
• Temperature range: -40°C +85°C.
• Voltage rating: 500VDC

Ceramic disc capacitors rated for up to 3kV, ± 10% tolerance.

The new SoZo fully custom silver mica capacitor is a distinct-design capacitor which is manufactured to fully exhibit the electrical characteristics of yesteryear and has custom materials. The overall goal was to manipulate the electrical characteristics to eliminate excess energy and ringing in the out-of-band audio frequencies.

SoZo's Yellow Mustard line of polyester film tube amp capacitors have been thoroughly tested by LA’s best tube amp builders. They are handmade to exact vintage specs, and beat everything available, even in high gain situations.
After years of painstaking research and development, in 2003 SoZo Amplification began manufacturing the SoZo Mustard Cap™ capacitors, which quickly caught on among discriminating musicians and amp designers. Now, hundreds of thousands of capacitors later, SoZo has engineered capacitor product lines optimized for different products, including amps by Marshall™, Fender®, Vox®, HiWatt, and others, as well as professional sound gear from Neve, API, Neumann, Universal Audio, Urei, and virtually any quality gear from the 1950s on.
These caps are successful recreations of the originals and are superbly built and excellent-sounding caps. When one considers the audio signal passes through as many as ten capacitors before exiting the amplifier, you can see how these components play an extremely large role in the tone of the amplifier.

CE Manufacturing USA Made Multi Section Can Capacitor. Reproduced To Exact Mallory Specs Using Original Mallory Machinery.

• 50/50/50/50 μF 350VDC.
• FP / Twist Lock Style. Solder Tabs.
• -10%, +50% Tolerance, 85°C Temperature Rating.
• 1 3/8"D X 2 1/2"H.

Rated for 85 degree operation. Tolerance ±20%. Measures 1.03" diameter X 1.97" height

Ceramic disc capacitors rated for up to 2kV, ± 10% tolerance.

.47" diameter x 1.15" height. Operating temperature range -40°C to 85°C.
Axial lead electrolytic. Made in Germany.
Founded in 1948 by Heinz Fischer and Alfred Tausche, F&T Capacitors has over 60 years of experience in producing some of the finest capacitors available today. F&T Caps are known for their great tone and reliability.

Capacitor - Electrolytic, 30/30/30/10 µF @ 475 VDC Drop-In replacement for Leslie 4 section 30uF/30uF/30uF/10uF @ 475V For use in Leslie 122, 147, many others. CE Manufacturing capacitors are hand made in the USA using original Mallory Equipment. All CE manufactured can capacitors have a two year warranty against manufactured defects.

CE Manufacturing USA made multi section can capacitor. Reproduced to exact Mallory specs using original Mallory machinery. 30/30/30/10 uF @ 525 VDC, FP / Twist Lock Style. Solder Tabs. -10%, +50% Tolerance, 55°C Temperature Rating. 1-3/8" dia. x 2-1/2" tall. All CE manufactured can capacitors have a two year warranty against manufactured defects.

Same diameter as LCR. Great for use in Marshall amplifiers. 1-3/8" dia. x 2" long

Made in Germany. 1" diameter x 2" length. Founded in 1948 by Heinz Fischer and Alfred Tausche, F&T Capacitors has over 60 years of experience in producing some of the finest capacitors available today. F&T Caps are known for their great tone and reliability.

This low ripple capacitor tests superior to any other capacitor of its value currently being made. Commonly used as filter capacitors in guitar amps. 50 μF + 50 μF @ 500 VDC. 1 3/8" diameter x 2 3/16" tall. Requires clamp - S-H122. Replacement for LCR.

CE Manufacturing USA made multi section can capacitor. Made to Mallory specs using original Mallory machinery.

CE Manufacturing USA Made Multi section Can Capacitor. Reproduced To Exact Mallory Specs Using Original Mallory Machinery.

• 30/20/20/20uF 525VDC Electrolytic. Used In Dyanaco ST-70 Amplifiers.
• FP / Twist Lock Style. Solder Tabs.
• -10%, +50% Tolerance, 55°C Temperature Rating.
• 1 ⅜"D X 3 1/2"H.

Clamp for mounting electrolytic can capacitors in vertical position. Supplied with #6-32 screw and nut.

CE Manufacturing USA Made Multi Section Can Capacitor. Reproduced To Exact Mallory Specs Using Original Mallory Machinery.

• 40/20/20/20uF 525VDC Electrolytic.
• FP / Twist Lock Style. Solder Tabs.
• -10%, +50% Tolerance, 55°C Temperature Rating.
• 1 ⅜"D X 2 1/2"H.

All CE manufactured can capacitors have a two year warranty against manufactured defects.