Capacitors
Capacitors are passive devices that are used in almost all electrical circuits for rectification, coupling and tuning. Also known as condensers, a capacitor is simply two electrical conductors separated by an insulating layer called a dielectric. The conductors are usually thin layers of aluminum foil, while the dielectric can be made up of many materials including paper, mylar, polypropylene, ceramic, mica, and even air. Electrolytic capacitors have a dielectric of aluminum oxide which is formed through the application of voltage after the capacitor is assembled.
Characteristics of different capacitors are determined by not only the material used for the conductors and dielectric, but also by the thickness and physical spacing of the components.
Capacitor - F&T, 500V, Type A, Axial Lead
Axial lead electrolytic capacitors from F&T. The capacitors have an operating temperature range -40°C to 85°C. Made in Germany.
Starting at $4.25
Capacitor - JJ Electronics, 500V, 100/100µF, Electrolytic
Same diameter as LCR. Great for use in Marshall amplifiers. 1-3/8" dia. x 2 7/8" height. S-H122 is a good mounting clamp for this can
$12.95
Capacitor - JJ Electronics, 500V, Axial Lead Electrolytic
Electrolytic axial capacitor rated at 500 Volts. These capacitors have special features which enable them to excel in music industry applications. Low impedance, Low ESR, Wide frequency range.
1.66" length x 0.99" diameter 1.70" lead length.
- Operating temperature: -25°C to 70°C
- Nominal Voltage: 500Vdc
- Rated Capacitance: 30µF - 100 µF (depending on capacitor)
- Capacitance tolerance (at 100Hz, 20°C): -10%+30%
- Dissipation factor (at 100Hz, 20°C): 0.18
- Leakage current (after 5 minutes application of rated voltage): 0.004 C.U.
1.66" length x 0.99" diameter 1.70" lead length.
Starting at $7.75
Capacitor - JJ Electronics, 500V, 50/50µF, Electrolytic
Same diameter as LCR. Great for use in Marshall amplifiers. 1-3/8" diameter x 2" tall. S-H122 is a good mounting clamp for this can
$10.95
Capacitor - JJ Electronics, 500V, 500µF, Electrolytic
JJ Electronic single-section electrolytic can capacitor, 500 µF -10%+30% @ 500 V. 1 3/8" diameter x 3 1/2" height (35 x 88 mm). Clamp mount, solder lug terminals. Excellent for music industry applications
$21.95
Capacitor - JJ Electronics, 500V, 40/20/20/20µF, Electrolytic
JJ Electronic multi-section electrolytic can capacitor, 40/20/20/20 µF -10%+30% @ 500 V. 1-1/2" diameter x 2" height (40 x 50 mm). Clamp mount, solder lug terminals. Excellent for music industry applications
$18.95
Capacitor - CE Mfg., 525 V, 40/40/40 μF
CE Manufacturing USA Made Multi Section Can Capacitor. Reproduced To Exact Mallory Specs Using Original Mallory Machinery.
All CE manufactured can capacitors have a two year warranty against manufactured defects.
- 40/40/40uF 525VDC.
- FP / Twist Lock Style. Solder Tabs.
- -10%, +50% Tolerance, 55°C Temperature Rating.
- 1 3/8"D X 3"H.
All CE manufactured can capacitors have a two year warranty against manufactured defects.
$40.95
Capacitor - CE Mfg., 525V, 20/20/20µF
CE Manufacturing USA Made Multi Section Can Capacitor. Reproduced To Exact Mallory Specs Using Original Mallory Machinery.
Note: This 3-section capacitor is in a 4-section case. A 4-section insulator such as S-H120 should be used with this capacitor, rather than a 3-section insulator.
- 20/20/20uF 525VDC. FP / Twist Lock Style. Solder Tabs.
- -10%, +50% Tolerance, 55°C Temperature Rating.
- 1 3/8"D X 3"H.
Note: This 3-section capacitor is in a 4-section case. A 4-section insulator such as S-H120 should be used with this capacitor, rather than a 3-section insulator.
$38.95
Capacitor - CE Mfg., 525V, 40/20/20/20µF
CE Manufacturing USA Made Multi Section Can Capacitor. Reproduced To Exact Mallory Specs Using Original Mallory Machinery.
All CE manufactured can capacitors have a two year warranty against manufactured defects.
- 40/20/20/20uF 525VDC Electrolytic.
- FP / Twist Lock Style. Solder Tabs.
- -10%, +50% Tolerance, 55°C Temperature Rating.
- 1 ⅜"D X 2 1/2"H.
All CE manufactured can capacitors have a two year warranty against manufactured defects.
$40.95
Capacitor - CE Mfg., 525V, 40/40/20/20 μF
CE Manufacturing USA made multi section can capacitor. Made to Mallory specs using original Mallory machinery.
$40.95
Capacitor - CE Mfg., 525V, 30/20/20/20 μF
CE Manufacturing USA Made Multi section Can Capacitor. Reproduced To Exact Mallory Specs Using Original Mallory Machinery.
- 30/20/20/20uF 525VDC Electrolytic. Used In Dyanaco ST-70 Amplifiers.
- FP / Twist Lock Style. Solder Tabs.
- -10%, +50% Tolerance, 55°C Temperature Rating.
- 1 ⅜"D X 3 1/2"H.
$40.95
Capacitor - CE Mfg., 525V, 30/30/30 μF
CE Manufacturing USA Made Multi Section Can Capacitor. Reproduced To Exact Mallory Specs Using Original Mallory Machinery.
- 30/30/30uF 525VDC Electrolytic.
- FP / Twist Lock Style. Solder Tabs.
- -10%, +50% Tolerance, 55°C Temperature Rating.
- 1 3/8"D X 3"H.
$38.95
Capacitor - CE Mfg., 800V (900V Surge), 25µF, Electrolytic
CE Manufacturing multi-section electrolytic "Firecracker" style capacitor (modern polarized electrolytic caps in a tube for a vintage look). 25 µF ±20% @ 800 VDC. 1-1/16" diameter x 4-½" length. Includes zip-tie and mount square. Great for antique radio restoration. Two wires (Red, Black)
$12.25
Capacitor - CE Mfg., 80µF@350V, 40µF@350V, 40µF@350V, 50µF@50V
CE Manufacturing USA Made Multi Section Can Capacitor. Reproduced to exact Mallory specs using original Mallory machinery.
- 80µF@350V, 40µF@350V, 40µF@350V, 50µF@50V
- FP / Twist Lock Style. Solder Tabs.
- -10%, +50% Tolerance, 85°C Temperature Rating.
- 1 ⅜"D X 3.6"H.
- All CE Manufacturing can capacitors have a two year warranty against manufactured defects.
$40.95
Capacitor - 50V, Radial Lead, Electrolytic
High quality, radial leaded, aluminum electrolytic capacitors rated at 50VDC.
$0.60
package of 5
Capacitor - 500V, Axial Lead Electrolytic, 80µF
Axial electrolytic capacitor.
- Capacitance: 80µF
- Tolerance: ±20%
- Temperature range: -40°C +85°C.
- Voltage rating: 500VDC
$2.55
Capacitor - CE Mfg., 450V, 40/40µF, Electrolytic
CE Manufacturing USA Made Multi Section Can Capacitor. Reproduced To Exact Mallory Specs Using Original Mallory Machinery.
- 2 sections - 40/40µF at 450V
- -10%, +50% tolerance
- 85° temperature rating
- 1-⅜" dia. x 2.6" tall
$40.95
Capacitor - CE Mfg., 450V, 100/40µF, Electrolytic
CE Manufacturing USA-made Multi Section Can Capacitor. Reproduced To Exact Mallory Specs Using Original Mallory Machinery. 100/40µF 450VDC FP / Twist Lock Style. Solder Tabs. -10%, +50% Tolerance, 85°C Temperature Rating.
$40.95
Capacitor - CE Mfg., 20@450V x2, 100@50V x 2
USA made CE Manufacturing multi section electrolytic can capacitor. The four sections are - 20uF at 450VDC, 100uF at 50VDC, 100uF at 50VDC, and 20uF at 450VDC. Manufactured to Mallory specs on original Mallory machinery.
- 20@450V x2,100@50V x 2 Electrolytic
- FP / Twist Lock Style. Solder Tabs
- -10%, +50% Tolerance, 85°C Temperature Rating
- 1 ⅜"D X 2 ½"H
$36.95
Capacitor - CE Mfg., 450V, 20/20/20µF, Electrolytic
CE Manufacturing USA made multi section can capacitor. 3 sections 20µF at 450VDC. 85°C temp rating.
Great replacement for the can capacitor in the Champ AA764, Vibro-Champ AA764, and Bronco Amp AB764.
Great replacement for the can capacitor in the Champ AA764, Vibro-Champ AA764, and Bronco Amp AB764.
$37.95
Capacitor - Jupiter, Cosmos, Wet Electrolytic, Axial Lead
The Cosmos Wet Electrolytic Capacitors present a new axial range from Jupiter Condenser. Inspired from and designs based on early American Wet Electrolytic capacitors used in audio amplifiers, guitar amplifiers, and pro audio applications. Made in the USA. Available ranging from 10uF to 250uF and voltages from 25V to 500V
Starting at $4.99
Capacitor - CE Mfg., 60µF@525V, 40@525, 10@450, 25@50
Capacitor - Electrolytic, 60/525, 40/525, 10/450, 25/50
$36.95
Capacitor - Illinois, 50V, 22µF, Non / Bi-Polar Axial Lead Electrolytic
High quality bipolar / non-polarized (NP) electrolytic capacitor from Illinois Capacitor. Rated for 50V and -40°C to +85°C operation, these capacitors have a ±20% tolerance and axial leads. Bipolar capacitors are popular for audio coupling and crossovers. The 22µF value is great for cathode bypass capacitors on preamp tubes as well as Mk1 Tonebender builds using P-PC-BEND-MKI or other boards.
$0.95
Capacitor - Mod® Electronics, Aluminum Electrolytic, 105°C, Axial Lead
Mod® Electronics electrolytic capacitors provide builders with quality capacitors that offer long-lasting performance at the highest degree. These capacitors are designed with tube amplifiers in mind; each capacitor is rated at 105°C. This temperature rating provides a highly-stable capacitance in any device, be it vacuum tube or solid state. The Mod® electrolytic capacitor line features capacitance values that are common in many vintage amplifiers but are not readily available today. Builders and techs can confidently use these capacitors to match the original specifications of their equipment.
Starting at $0.65