Capacitors

Capacitors are passive devices that are used in almost all electrical circuits for rectification, coupling and tuning. Also known as condensers, a capacitor is simply two electrical conductors separated by an insulating layer called a dielectric. The conductors are usually thin layers of aluminum foil, while the dielectric can be made up of many materials including paper, mylar, polypropylene, ceramic, mica, and even air. Electrolytic capacitors have a dielectric of aluminum oxide which is formed through the application of voltage after the capacitor is assembled. Characteristics of different capacitors are determined by not only the material used for the conductors and dielectric, but also by the thickness and physical spacing of the components.
Capacitor - CE Mfg., 525V, 30/30/30/10uF, Electrolytic
CE Manufacturing USA made multi section can capacitor. Reproduced to exact Mallory specs using original Mallory machinery. 30/30/30/10 uF @ 525 VDC, FP / Twist Lock Style. Solder Tabs. -10%, +50% Tolerance, 55°C Temperature Rating. 1-3/8" dia. x 2-1/2" tall. All CE manufactured can capacitors have a two year warranty against manufactured defects.
$40.95
Capacitor Clamp - 1.5" Diameter, for vertical mounting
Clamp for mounting electrolytic capacitor cans in vertical position. Supplied with #6-32 screw and nut. 1-½" diameter.
$2.65
Capacitor - 160V, Radial Lead, Electrolytic
High quality, radial leaded, aluminum electrolytic capacitors rated at 160VDC.
$0.74
Capacitor - Axial Lead Electrolytic, 70µF, 100VDC
High quality low leakage axial lead electrolytic capacitor
  • 70uF/100V
  • Rated for 85° C operation
  • Tolerance: -20%, +50%
  • Measures 0.51" dia. x 0.84" length
$1.00
Capacitor - CE Mfg., 525V, 40/40/20/20 μF
CE Manufacturing USA made multi section can capacitor. Made to Mallory specs using original Mallory machinery.
$40.95
Capacitor - Solen, 1000V, "Fast", Metalized Polypropylene
Made of the highest quality aluminum metalized polypropylene film available.Made in France.
Starting at $4.75
Capacitor - SoZo, Silver Mica, 1000V
The new SoZo fully custom silver mica capacitor is a distinct-design capacitor which is manufactured to fully exhibit the electrical characteristics of yesteryear and has custom materials. The overall goal was to manipulate the electrical characteristics to eliminate excess energy and ringing in the out-of-band audio frequencies.
Starting at $9.45
Capacitor - F&T, 450V, 33/33µF, Electrolytic
Dual section axial lead electrolytic capacitor from F&T with two 33uF sections rated for 450V. This type of cap is used in Marshall amps. The capacitor body has a 1" diameter and 2" length. Made in Germany.
$10.95
Capacitor - 500V, Axial Lead Electrolytic, 80µF
Axial electrolytic capacitor.
  • Capacitance: 80µF
  • Tolerance: ±20%
  • Temperature range: -40°C +85°C.
  • Voltage rating: 500VDC
$2.55
Capacitor - CE Mfg., 475V, 30/30/30/10µF, Electrolytic
Capacitor - Electrolytic, 30/30/30/10 µF @ 475 VDC Drop-In replacement for Leslie 4 section 30uF/30uF/30uF/10uF @ 475V
For use in Leslie 122, 147, many others.
CE Manufacturing USA Made Multi Section Can Capacitor. Reproduced To Exact Mallory Specs Using Original Mallory Machinery.
  • 30/30/30/10 μF 475VDC.
  • FP / Twist Lock Style. Solder Tabs.
  • -10%, +50% Tolerance, 65°C Temperature Rating.
  • 1 3/8"D X 2 1/2"H.
$38.95
Capacitor - 0.01µF, 250V, Chicklet style, Axial Lead
Flat 0.01uF (10nF) film capacitor rated for 250V. Made of metallized polypropylene film, this capacitor is a great choice for audio applications. The style of this yellow capacitor is similar in appearance to the flat rectangular Philips 341 output caps found in original Fuzz Face pedals.
$1.35
Capacitor - 500V, 50/50μF, Electrolytic
This low ripple capacitor tests superior to any other capacitor of its value currently being made. Commonly used as filter capacitors in guitar amps. 50 μF + 50 μF @ 500 VDC. 1 3/8" diameter x 2 3/16" tall. Requires clamp - S-H122. Replacement for LCR. The common negative terminal is dotted.
$9.25
Capacitor - JJ Electronics, 500V, 100/100µF, Electrolytic
Same diameter as LCR. Great for use in Marshall amplifiers. 1-3/8" dia. x 2 7/8" height. S-H122 is a good mounting clamp for this can
$12.95
Capacitor - Vishay Roederstein, 250V, 0.68 µF, MKT1813, Axial Lead
High quality 0.68uF axial capacitor rated at 250V. This value is popular for cathode bypass capacitors in many vintage Marshall amps. The 8.5x26.5mm size works well for turret board builds of these classic amplifiers. These MKT1813 capacitors are produced by Vishay Roederstein, formerly known as ERO. These capacitors are made with metalized polyester film and sealed in epoxy resin. Suggested applications include blocking, bypassing, filtering, timing, coupling and decoupling, interference suppression in low voltage applications. Features
  • Plastic-wrapped, epoxy resin sealed, flame retardant encapsulation
  • Non polar
  • Tubular metalized polyester film construction
  • ±10% tolerance
  • Axial leads
  • Operational life greater than 300,000 hours (40 °C/0.5 UR)
$2.35
Capacitor - 100V, 100µF, Radial Lead, Electrolytic
High quality, radial leaded, aluminum electrolytic capacitors rated at 100VDC.
$0.90
package of 5
Capacitor - Vishay BC, 250V, MKT368, Radial Lead
High quality radial capacitors rated at 250V. These MKT368 capacitors are produced by Vishay BC and formerly by Philips. These capacitors are made with metalized polyester film and sealed in epoxy lacquer. Their style and make is similar to the tropical fish capacitors of the 1960s and 70s. Suggested applications include blocking, bypassing, filtering, coupling and energy reservoir applications. Features
  • Polyester film dielectric
  • Vacuum deposited aluminum electrodes
  • Wound mono construction
  • Flame retardant epoxy material (UL-class 94 V-0)
  • Tinned wire radial leads
  • Performance Grade 1 (long life)
  • ±10% tolerance
  • Rated 250VDC

Voltage Rating SKU 100V C-368-X-100 250V C-368-X-250 400V C-368-X-400
Starting at $0.75
Capacitor - CE Mfg., 500V, 40/20/20 μF
CE Manufacturing USA Made Multi Section Can Capacitor. Reproduced To Exact Mallory Specs Using Original Mallory Machinery.
  • 40/20/20uF 500VDC Electrolytic.
  • FP / Twist Lock Style. Solder Tabs.
  • -10%, +50% Tolerance, 55°C Temperature Rating.
  • 1 3/8"D X 2 1/2"H.
$38.95
Capacitor - F&T, 25V, 25/25µF, Electrolytic
Dual section axial lead electrolytic capacitor from F&T with two 25uF sections rated for 25V. This type of cap is used in Fender amps. The capacitor body has a 1" diameter and 2" length. Made in Germany.
$9.95
Capacitor - F&T, 160V, 33µF, Axial Lead Electrolytic
Electrolytic F&T axial lead electrolytic capacitor
  • 33 uF/ 160V
  • .47" diameter x 1.15" length
  • Operating temperature range -40°C to 105°C
  • Made in Germany

Founded in 1948 by Heinz Fischer and Alfred Tausche, F&T Capacitors has over 60 years of experience in producing some of the finest capacitors available today. F&T Caps are known for their great tone and reliability
$1.95
Capacitor - CE Mfg., 525V, 30/20/20/20 μF
CE Manufacturing USA Made Multi section Can Capacitor. Reproduced To Exact Mallory Specs Using Original Mallory Machinery.
  • 30/20/20/20uF 525VDC Electrolytic. Used In Dyanaco ST-70 Amplifiers.
  • FP / Twist Lock Style. Solder Tabs.
  • -10%, +50% Tolerance, 55°C Temperature Rating.
  • 1 ⅜"D X 3 1/2"H.
$40.95
Capacitor - CE Mfg., 525V, 40/20/20/20µF
CE Manufacturing USA Made Multi Section Can Capacitor. Reproduced To Exact Mallory Specs Using Original Mallory Machinery.
  • 40/20/20/20uF 525VDC Electrolytic.
  • FP / Twist Lock Style. Solder Tabs.
  • -10%, +50% Tolerance, 55°C Temperature Rating.
  • 1 ⅜"D X 2 1/2"H.

All CE manufactured can capacitors have a two year warranty against manufactured defects.
$40.95
Capacitor - Mallory, 100V, 0.68 µF, 150s, Axial Lead
0.68uF Mallory axial capacitors rated for 100V. This value is popular for cathode bypass capacitors in many vintage Marshall amps. The 8.5x20.5mm size works well for turret board builds of these classic amplifiers. The Type 150 series are axial lead metallized polyester non inductive capacitors. Type 150 is a general purpose capacitor for use in blocking, bypass, decoupling, smoothing and some timing applications. Features
  • Epoxy end fill meets UL94V-0
  • Non inductively wound
  • Flame retardant outer wrap meets UL510
  • Non polar
$3.95
Capacitor - 250V, 47µF, Axial Lead Electrolytic
High quality low leakage tubular electrolytic capacitor. Rated for 85° C operation.
Tolerance -20%, +50%.
Size .63" dia. x 1.25" length.
$1.40
Insulator - 3 Section, for FP Cap, 1.5" Mounting Centers
Phenolic insulator for mounting FP type can capacitors.
$1.50