Capacitors

Capacitors are passive devices that are used in almost all electrical circuits for rectification, coupling and tuning. Also known as condensers, a capacitor is simply two electrical conductors separated by an insulating layer called a dielectric. The conductors are usually thin layers of aluminum foil, while the dielectric can be made up of many materials including paper, mylar, polypropylene, ceramic, mica, and even air. Electrolytic capacitors have a dielectric of aluminum oxide which is formed through the application of voltage after the capacitor is assembled. Characteristics of different capacitors are determined by not only the material used for the conductors and dielectric, but also by the thickness and physical spacing of the components.
Capacitor - Fender, 150V, Wax Paper
Fender offers a wide selection of Pure Vintage electronics to players looking to restore or upgrade their guitar or amplifier with classic Fender in mind. From potentiometers to select capacitors, tube sockets and more, these electronics are created to closely replicate original-era Fender parts and have been used on a number of Fender reissue instruments and amplifiers, including our American Vintage series of guitars and basses.
Starting at $12.95
Capacitor - Siemens, 250V, .22uF, Film
New old stock radial capacitors from Siemens with 10mm lead spacing. These 0.22uF film capacitors are rated for 250V. The construction matches the style found in vintage equipment such as the MKIII and MKIV Tone Bender pedals.
$5.95
Capacitor - Mod® Electronics, Aluminum Electrolytic, 105°C, Axial Lead
Mod® Electronics electrolytic capacitors provide builders with quality capacitors that offer long-lasting performance at the highest degree. These capacitors are designed with tube amplifiers in mind; each capacitor is rated at 105°C. This temperature rating provides a highly-stable capacitance in any device, be it vacuum tube or solid state. The Mod® electrolytic capacitor line features capacitance values that are common in many vintage amplifiers but are not readily available today. Builders and techs can confidently use these capacitors to match the original specifications of their equipment.
Starting at $0.65
Mounting Plate - Metal, for 1" Can Capacitor
Metal plate for mounting FP type can capacitors. Designed for use with three section, 1” capacitors.
$1.50
Capacitor - Vishay BC, 250V, MKT368, Radial Lead
High quality radial capacitors rated at 250V. These MKT368 capacitors are produced by Vishay BC and formerly by Philips. These capacitors are made with metalized polyester film and sealed in epoxy lacquer. Their style and make is similar to the tropical fish capacitors of the 1960s and 70s. Suggested applications include blocking, bypassing, filtering, coupling and energy reservoir applications. Features
  • Polyester film dielectric
  • Vacuum deposited aluminum electrodes
  • Wound mono construction
  • Flame retardant epoxy material (UL-class 94 V-0)
  • Tinned wire radial leads
  • Performance Grade 1 (long life)
  • ±10% tolerance
  • Rated 250VDC

Voltage Rating SKU 100V C-368-X-100 250V C-368-X-250 400V C-368-X-400
Starting at $0.75
Capacitor - CE Mfg., 400V, 40/40/30/20µF, Electrolytic
CE Manufacturing USA Made Multi Section Can Capacitor. Reproduced To Exact Mallory Specs Using Original Mallory Machinery.
  • 40/40/30/20uF 400VDC Electrolytic.
  • FP / Twist Lock Style. Solder Lugs.
  • -10%, +50% Tolerance, 65°C Temperature Rating.
  • 1 3/8"D X 2.5"H.

Great replacement for the Echoplex EP-1.
All CE manufactured can capacitors have a two year warranty against manufactured defects.
$40.95
Cap Set - for Fender Vibro Champ AA764 (Black face)
Replacement electrolytic capacitor set.
Basic set includes:
  • (1) C-EC20X3-450
  • (3) C-ET25-25
  • (1) C-ET10-50
Premium set includes:
  • (1) C-EC20X3-450 (CE Manufacturing)
  • (3) C-SA25-25 (Sprague Atom)
  • (1) C-SA10-25 (Sprague Atom)
Warning: Some electrolytic capacitors can store charge even after the amp has been turned off and unplugged for some time. Always make sure your original electrolytic capacitors do not have a voltage present before touching them.
Starting at $39.27
package of 5
Capacitor - CE Mfg., 350V, 47/47/47μF, Electrolytic
CE Manufacturing USA Made Multi Section Can Capacitor. Reproduced To Exact Mallory Specs Using Original Mallory Machinery.
  • 47/47/47uF 350VDC Electrolytic.
  • FP / Twist Lock Style. Solder Tabs.
  • -10%, +50% Tolerance, 55°C Temperature Rating.
  • 1 ⅜"D X 2.6"H.
$40.95
Capacitor - CE Mfg., 200V, 100/100/100µF, Electrolytic
Made in the USA on Mallory's original machinery. Used in Marantz 10B tuner.
$38.95
Capacitor - CE Mfg., 300V, 120/20 μF
CE Manufacturing USA Made Multi Section Can Capacitor. Reproduced to exact Mallory specs using original Mallory machinery.
  • 120µF@300V, 20µF@300V
  • FP / Twist Lock Style. Solder Tabs.
  • -10%, +50% Tolerance, 85°C Temperature Rating.
  • 1 ⅜"D X 3"H.
  • All CE Manufacturing can capacitors have a two year warranty against manufactured defects.
$40.95
Capacitor - CE Mfg., 250 V, 150/80/80/50 μF
CE Manufacturing USA Made Multi Section Can Capacitor. Reproduced To Exact Mallory Specs Using Original Mallory Machinery.
  • 150/80/80/50 250VDC.
  • FP / Twist Lock Style. Solder Tabs.
  • -10%, +50% Tolerance, 85°C Temperature Rating.
  • 1 ⅜"D X 3"H.

All CE Manufacturing can capacitors have a two year warranty against manufacturer defects.
$36.95
Capacitor - 25V, Radial Lead, Electrolytic
High quality, radial leaded, aluminum electrolytic capacitors rated at 25VDC.
Starting at $0.65
package of 5
Capacitor - CE Mfg., 350V, 60/60/30/30 µF
CE Manufacturing USA Made Multi Section Can Capacitor. Reproduced to exact Mallory specs using original Mallory machinery.
  • 60µF@350V, 60µF@350V, 30µF@350V, 30µF@350V
  • FP / Twist Lock Style. Solder Tabs.
  • -10%, +50% Tolerance, 85°C Temperature Rating.
  • 1 ⅜"D X 3.6"H.
  • All CE Manufacturing can capacitors have a two year warranty against manufactured defects.
$40.95
Cap Set - for Fender Deluxe Reverb AB763 (Black face)
Replacement electrolytic capacitor set. Basic set includes:
  • (5) C-ET16-475-FT
  • (1) C-ET25-50
  • (7) C-ET25-25

Mod set includes:
  • (5) C-ET16-475-MOD
  • (8) C-ET25-50-MOD

Premium set includes:
  • (5) C-SA16-475 (Sprague Atom)
  • (1) C-SA25-50 (Sprague Atom)
  • (7) C-SA25-25 (Sprague Atom)

Warning: some electrolytic capacitors can store charge even after the amp has been turned off and unplugged for some time. Always make sure your original electrolytic capacitors do not have a voltage present before touching them.
Starting at $14.95
package of 13
Partially Out of Stock
Capacitor - Jupiter, Red Astron Capacitors, Tin Foil, Axial Lead
Modeled after the legendary capacitors, the Jupiter Red Astron capacitors have a similar style to the vintage capacitors to give a very authentic tone and look, yet with high reliability and longevity. This phenolic case potted tin foil and mylar capacitor yields a uniquely vintage tone perfect for guitar amplifiers and vintage audio amplifiers alike.
  • Construction: Polyester/Tin Foil
  • Case: Potted Phenolic Paper
  • Tolerance: +/-10%
  • Operating temperature: -55C – 85C, derate 50% at 125C.
  • Leads: 20AWG Tinned Copper
  • Application: Guitar Amplifier, Guitar Tone Control, Vintage Audio Amplifier
  • Made in the USA of US-made materials.
Starting at $12.95
Capacitor - CE Mfg., 450V, 15/15/15/10µF, Electrolytic
CE Manufacturing USA-made Multi Section Can Capacitor. Reproduced To Exact Mallory Specs Using Original Mallory Machinery.
  • 15/15/15/10 µF 450VDC
  • -FP / Twist Lock Style. Solder Tabs.
  • -10%, +50% Tolerance
  • -85°C Temperature Rating.
  • -1 ⅜"D X 2 ½"H.
$38.95
Capacitor - CE Mfg., 80µF@350V, 40µF@350V, 40µF@350V, 50µF@50V
CE Manufacturing USA Made Multi Section Can Capacitor. Reproduced to exact Mallory specs using original Mallory machinery.
  • 80µF@350V, 40µF@350V, 40µF@350V, 50µF@50V
  • FP / Twist Lock Style. Solder Tabs.
  • -10%, +50% Tolerance, 85°C Temperature Rating.
  • 1 ⅜"D X 3.6"H.
  • All CE Manufacturing can capacitors have a two year warranty against manufactured defects.
$40.95
Capacitor - CE Mfg., 450V, 20/20/20µF, Electrolytic
CE Manufacturing USA made multi section can capacitor. 3 sections 20µF at 450VDC. 85°C temp rating.
Great replacement for the can capacitor in the Champ AA764, Vibro-Champ AA764, and Bronco Amp AB764.
$37.95
Capacitor - Orange Drop, 100V, Polyester
Orange Drop 225P series Polyester film/foil capacitors, 100v, 10% tolerance. The 225P series capacitors in 100v rating are ideal for work in guitar wiring where a smaller footprint is needed to fit in the tight spaces often found in instrument control cavities. With over 35 years of proven dependability in the guitar and amp world you can count on Orange Drop caps to get you the tone you’re looking for. Features:
  • Non- inductively wound polyester film/foil construction
  • Radial lead
  • 10% tolerance
  • 100v voltage rating
  • Rated for 85°C operation
  • Tinned copper-clad steel leads
Starting at $2.15
Capacitor - CE Mfg., 40µF@450V, 10µF@450V, 10µF@450V, 250@25
CE Manufacturing USA Made Multi Section Can Capacitor. Reproduced to exact Mallory specs using original Mallory machinery.
  • 40µF@450V, 10µF@450V, 10µF@450V, 250@25
  • FP / Twist Lock Style. Solder Tabs.
  • -10%, +50% Tolerance, 55°C Temperature Rating.
  • 1 ⅜"D X 3"H.

All CE manufactured can capacitors have a two year warranty against manufactured defects.
$36.95
Capacitor - 600V, .047µF, Oil-Soaked Polyester
Non-inductive polyester and oil caps, these film capacitors use oil-soaked polyester as di-electric material and are smooth and natural in sound.
$5.40
On Backorder
Capacitor - CE Mfg., 350 V, 120/100/100/100 μF
CE Manufacturing USA Made Multi Section Can Capacitor. Reproduced To Exact Mallory Specs Using Original Mallory Machinery. Similar to Mallory FP417.26.
  • 120/100/100/100uF 350VDC.
  • FP / Twist Lock Style. Solder Tabs.
  • -10%, +50% Tolerance, 85°C Temperature Rating.
  • 1 ⅜" D X 3.5" H.
  • All CE manufactured can capacitors have a two year warranty against manufactured defects.
$40.95
Capacitor - CE Mfg., 450V, 70/40/40µF, Electrolytic
CE Manufacturing USA Made Multi Section Can Capacitor. Reproduced To Exact Mallory Specs Using Original Mallory Machinery.
  • 70/40/40µF 450VDC
  • FP / Twist Lock Style. Solder Tabs.
  • -10%, +50% Tolerance, 85°C Temperature Rating.
$40.95
Tool Oil - for Maintenance & Work
Multi-use tool oil for both maintaining and using tools. This rust-preventive oil can be used to lubricate tools such as hinges on pliers. It can also be used to thinly coat metal tools to avoid future corrosion. Additionally, it can be used as a cutting and filing lubricant when slotting a nut for a guitar, slotting bridge saddles, and other cutting purposes. The 15ml bottle features a needle dropper tip.
$5.50