You are here

Capacitors

Capacitors are passive devices that are used in almost all electrical circuits for rectification, coupling and tuning. Also known as condensers, a capacitor is simply two electrical conductors separated by an insulating layer called a dielectric. The conductors are usually thin layers of aluminum foil, while the dielectric can be made up of many materials including paper, mylar, polypropylene, ceramic, mica, and even air. Electrolytic capacitors have a dielectric of aluminum oxide which is formed through the application of voltage after the capacitor is assembled.

Characteristics of different capacitors are determined by not only the material used for the conductors and dielectric, but also by the thickness and physical spacing of the components.

Filter these results
Sort By:
products per page
View Mode: List View · Grid View

Pages

(10 pages)
C-EC32-32-500CECapacitor - 500V, 32/32µF, Electrolytic

This low ripple capacitor tests superior to any other capacitor of its value currently being made. Commonly used as filter capacitors in guitar amps. 32μF + 32μF @ 500VDC. 1-3/8" dia. x 2" tall. Requires clamp - S-H122. Replacement for LCR.


$7.50
Click to read more
C-ET220-300-FTCapacitor - F&T, 300V, 220µF, Electrolytic
Electrolytic F&T axial lead electrolytic capacitor
  • 220 uF/ 300V
  • .98" diameter x 1.96" length
  • Operating temperature range -40°C to 85°C
  • Made in Germany

Founded in 1948 by Heinz Fischer and Alfred Tausche, F&T Capacitors has over 60 years of experience in producing some of the finest capacitors available today. F&T Caps are known for their great tone and reliability
$7.50
Click to read more
C-EC220-385Capacitor - JJ Electronics, 385V, 220µF, Electrolytic

JJ Electronic single-section electrolytic can capacitor, 220 µF -10%+30% @ 385 V, 1-3/16" diameter x 2" height (30 x 50 mm). Snap-in PC mount terminals. Excellent for music industry applications.



  • Rated Capacitance: 220 µF
  • Rated Voltage: 385 V
  • max. tanδ at 100Hz, 20° C: 0,15
  • Iac: 650 mA

$7.95
Click to read more
C-EM8-8-450Capacitor - F&T, 450V, 8/8µF, Axial Lead Electrolytic
Made in Germany. 1" diameter x 1.5" length. Used in Vox AC30
Founded in 1948 by Heinz Fischer and Alfred Tausche, F&T Capacitors has over 60 years of experience in producing some of the finest capacitors available today. F&T Caps are known for their great tone and reliability.
$7.95
Click to read more
C-ET16-16-500FTCapacitor - F&T, 500V, 16/16µF, Axial Lead Electrolytic
Axial lead two section electrolytic 16/16µF, 500V. Made in Germany. Founded in 1948 by Heinz Fischer and Alfred Tausche, F&T Capacitors has over 60 years of experience in producing some of the finest capacitors available today. F&T Caps are known for their great tone and reliability.
$7.95
Click to read more
C-EC50-50-500CECapacitor - 500V, 50/50uF, Electrolytic

This low ripple capacitor tests superior to any other capacitor of its value currently being made. Commonly used as filter capacitors in guitar amps. 50uF + 50uF @ 500VDC. 1 3/8" diameter x 2 3/16" tall. Requires clamp - S-H122. Replacement for LCR.


$8.25
Click to read more
C-EC16-16-500Capacitor - JJ Electronics, 500V, 16/16µF, Electrolytic

JJ Electronics aluminum electrolytic capacitor. Low impedance, low ESR, wide frequency range. For power supplies, high-end exlectronics, and industrial electronics.



  • Rated voltage: 16/16µF
  • Operating temperature: -25°C - 70°C
  • Rated voltage: 500VDC
  • Capacitance tolerance (at 100Hz, 20°C): -10% + 30%
  • Dissipation factor (at 100Hz, 20°C): 0.15 - 0.25


The aluminum case capacitors are supplied with PVC sleeve insulation and a safety vent located on end deck. Load life is 1000 hours (at maximum operating temperature, rated voltage, and AC current load)


$8.25
Click to read more
C-EC32-32-500Capacitor - JJ Electronics, 500V, 32/32uF, Electrolytic

Same diameter as LCR. Great for use in Marshall amplifiers. 1-3/8" dia. x 2" long.



  • Rated Capacitance: 32+32 µF
  • Rated Voltage: 500 V
  • max. tanδ at 100Hz, 20° C: 0,20
  • Iac: 150+150 mA

$8.45
Click to read more
C-ET10-10Capacitor - CE Mfg., Tubular, 450V, 10/10µF

CE Manufacturing multi-section electrolytic "Firecracker" style capacitor (modern polarized electrolytic caps in a tube for a vintage look). 10/10 µF ±20% @ 450 VDC. 7/8" diameter x 2-¾" length. Includes zip-tie and mount square. Great for antique radio restoration. Three wires (Orange, Orange, Black):



  • Orange to Black = 10 µF

$8.50
Click to read more
C-EC50-50-500Capacitor - JJ Electronics, 500V, 50/50µF, Electrolytic

Same diameter as LCR. Great for use in Marshall amplifiers. 1-3/8" diameter x 2" tall. S-H122 is a good mounting clamp for this can.



  • Rated Capacitance: 50+50 µF
  • Rated Voltage: 500 V
  • max. tanδ at 100Hz, 20° C: 0,20
  • Iac: 200+200 mA

$8.95
Click to read more

Pages

(10 pages)
Don't see a product you're looking for? Send us your product suggestions!
Subscribe to RSS - Capacitors