Capacitors

Capacitors are passive devices that are used in almost all electrical circuits for rectification, coupling and tuning. Also known as condensers, a capacitor is simply two electrical conductors separated by an insulating layer called a dielectric. The conductors are usually thin layers of aluminum foil, while the dielectric can be made up of many materials including paper, mylar, polypropylene, ceramic, mica, and even air. Electrolytic capacitors have a dielectric of aluminum oxide which is formed through the application of voltage after the capacitor is assembled. Characteristics of different capacitors are determined by not only the material used for the conductors and dielectric, but also by the thickness and physical spacing of the components.
Capacitor - F&T, Multi-Section, Electrolytic
High quality multi-section can capacitors from F&T. These capacitors are similar to the LCR caps found in many Marshall and Hiwatt amplifiers. The body has a 1-⅜" diameter and a 2" length. A 1-⅜" mounting clamp is required. Made in Germany.
Starting at $10.95
Capacitor - CE Mfg., 800V (900V Surge), 16µF, Electrolytic
CE Manufacturing multi-section electrolytic "Firecracker" style capacitor (modern polarized electrolytic caps in a tube for a vintage look). 16 µF ±20% @ 800 VDC. 1-1/16" diameter x 4-½" length. Includes zip-tie and mount square. Great for antique radio restoration. Two wires (Blue, Black)
$10.95
Capacitor - JJ Electronics, 385V, 220µF, Electrolytic
JJ Electronic single-section electrolytic can capacitor, 220 µF -10%+30% @ 385 V, 1-3/16" diameter x 2" height (30 x 50 mm). Snap-in PC mount terminals. Excellent for music industry applications.
$9.95
Capacitor - JJ Electronics, 500V, 16/16µF, Electrolytic
JJ Electronics aluminum electrolytic capacitor. Low impedance, low ESR, wide frequency range. For power supplies, high-end exlectronics, and industrial electronics.
  • Rated voltage: 16/16µF
  • Operating temperature: -25°C - 70°C
  • Rated voltage: 500VDC
  • Capacitance tolerance (at 100Hz, 20°C): -10% + 30%
  • Dissipation factor (at 100Hz, 20°C): 0.15 - 0.25

The aluminum case capacitors are supplied with PVC sleeve insulation and a safety vent located on end deck. Load life is 1000 hours (at maximum operating temperature, rated voltage, and AC current load)
$9.95
Capacitor - F&T, 25V, 25/25µF, Electrolytic
Dual section axial lead electrolytic capacitor from F&T with two 25uF sections rated for 25V. This type of cap is used in Fender amps. The capacitor body has a 1" diameter and 2" length. Made in Germany.
$9.95
Capacitor - JJ Electronics, 500V, 32/32μF, Electrolytic
Same diameter as LCR. Great for use in Marshall amplifiers. 1-3/8" dia. x 2" long
$9.95
Capacitor - SoZo, Silver Mica, 1000V
The new SoZo fully custom silver mica capacitor is a distinct-design capacitor which is manufactured to fully exhibit the electrical characteristics of yesteryear and has custom materials. The overall goal was to manipulate the electrical characteristics to eliminate excess energy and ringing in the out-of-band audio frequencies.
Starting at $9.45
Capacitor - 500V, 50/50μF, Electrolytic
This low ripple capacitor tests superior to any other capacitor of its value currently being made. Commonly used as filter capacitors in guitar amps. 50 μF + 50 μF @ 500 VDC. 1 3/8" diameter x 2 3/16" tall. Requires clamp - S-H122. Replacement for LCR. The common negative terminal is dotted.
$9.25
Capacitor - Illinois, 300V, 220µF, Axial Lead Electrolytic
Rated for 85 degree operation. Tolerance ±20%. Measures 1.03" diameter X 1.97" height
$8.95
Capacitor - CE Mfg., 33µF@160V, 47µF@160V, 22µF@25V
CE Manufacturing multi-section electrolytic "Firecracker" style capacitor (modern polarized electrolytic caps in a tube for a vintage look). 33/47 µF @ 160 VDC & 22 µF ±20% @ 25 VDC. 7/8" diameter x 2-¾" length. Includes zip-tie and mount square. Great for antique radio restoration. Four wires (Blue, Red, Orange, Black):
  • Blue to Black = 33 µF
  • Red to Black = 47 µF
  • Orange to Black = 22 µF
$8.95
Capacitor - CE Mfg., 160V, 33/33/47 µF, Electrolytic
CE Manufacturing multi-section electrolytic "Firecracker" style capacitor (modern polarized electrolytic caps in a tube for a vintage look). Made in the USA. Three sections 33uf, 33uf, 47uf at 160VDC. Measures 1" (diameter) x 3.7" (length).
$8.95
Capacitor - CE Mfg., 160V, 47/47µF, Electrolytic
CE Manufacturing multi-section electrolytic "Firecracker" style capacitor (modern polarized electrolytic caps in a tube for a vintage look). 47/47 µF ±20% @ 160 VDC. 7/8" diameter x 2-¾" length. Includes zip-tie and mount square. Great for antique radio restoration. Three wires (Red, Red, Black):
  • Red to Black = 47 µF
$8.95
Capacitor - F&T, 500V, 16/16µF, Axial Lead Electrolytic
Dual section axial lead electrolytic capacitor from F&T with two 16uF sections rated for 500V. This type of cap is used in Marshall amps. The capacitor body has a 1" diameter and 2" length. Made in Germany.
$8.95
Capacitor - CE Mfg., 160V, 47/80µF, Electrolytic
CE Manufacturing multi-section electrolytic "Firecracker" style capacitor (modern polarized electrolytic caps in a tube for a vintage look). 47/80 µF ±20% @ 160 VDC. 1-1/16" diameter x 3-¾" length. Includes zip-tie and mount square. Great for antique radio restoration. Three wires (Red, Orange, Black):
  • Red to Black = 47 µF
  • Orange to Black = 80 µF
$8.95
Capacitor - JJ Electronics, 385V, 100µF, Electrolytic
JJ Electronic single-section electrolytic can capacitor, 100 µF -10%+30% @ 385 V, 7/8" diameter x 1 5/8" height (22 x 42 mm). Snap-in PC mount terminals. Excellent for music industry applications
$8.95
Capacitor - CE Mfg., 160V, 33/47/47 µF, Electrolytic
CE Manufacturing multi-section electrolytic "Firecracker" style capacitor (modern polarized electrolytic caps in a tube for a vintage look). Made in the USA. 33/47/47 µF ±20% @ 160 VDC. 1-1/16" diameter x 3-¾" length. Includes zip-tie and mount square. Great for antique radio restoration. Four wires (Blue, Red, Red, Black):
  • Blue to Black = 33 µF
  • Red to Black = 47 µF
$8.95
Capacitor - CE Mfg., 160V, 33/47µF, Electrolytic
CE Manufacturing multi-section electrolytic "Firecracker" style capacitor (modern polarized electrolytic caps in a tube for a vintage look). 33/47µF ±20% @ 160 VDC. ⅞" diameter x 2-¾" length. Includes zip-tie and mount square. Great for antique radio restoration. Three wires (Blue, Red, Black):
  • Blue to Black = 33 µF
  • Red to Black = 47 µF
$8.95
Capacitor - CE Mfg., Tubular, 450V, 10/10µF
CE Manufacturing multi-section electrolytic "Firecracker" style capacitor (modern polarized electrolytic caps in a tube for a vintage look). 10/10 µF ±20% @ 450 VDC. 7/8" diameter x 2-¾" length. Includes zip-tie and mount square. Great for antique radio restoration. Three wires (Orange, Orange, Black):
  • Orange to Black = 10 µF
  • Orange leads are the anodes
  • Black lead is the common cathode
$8.50
Capacitor - F&T, 300V, 220µF, Electrolytic
Electrolytic F&T axial lead electrolytic capacitor
  • 220 uF/ 300V
  • .98" diameter x 1.96" length
  • Operating temperature range -40°C to 85°C
  • Made in Germany

Founded in 1948 by Heinz Fischer and Alfred Tausche, F&T Capacitors has over 60 years of experience in producing some of the finest capacitors available today. F&T Caps are known for their great tone and reliability
$8.35
Capacitor - F&T, 450V, 8/8µF, Axial Lead Electrolytic
Dual section electorlyic capacitor from F&T with two 8uF sections rated for 450V. This type of cap is used in Vox AC30 amps. The capacitor body has a 1" diameter and 1.5" length. Made in Germany.
$8.25
Capacitor - 500V, 32/32µF, Electrolytic
This low ripple capacitor tests superior to any other capacitor of its value currently being made. Commonly used as filter capacitors in guitar amps. 32μF + 32μF @ 500VDC. 1-3/8" dia. x 2" tall. Requires clamp - S-H122. Replacement for LCR. The common negative terminal is dotted.
$7.95
Capacitor - JJ Electronics, 385V, 47µF, Electrolytic
JJ Electronic single-section electrolytic can capacitor, 47µF -10%+30% @ 385 V. 7/8" diameter x 1-5/8" height (22 x 42 mm). Snap-in PC mount terminals. Excellent for music industry applications
$7.95
Capacitor - Illinois, 100 µF @ 450V, Axial Lead Electrolytic
Illinois Capacitor 450 V axial lead electrolytic. Rated for 85 degree operation.
$7.95
Capacitor - JJ Electronics, 500V, Axial Lead Electrolytic
Electrolytic axial capacitor rated at 500 Volts. These capacitors have special features which enable them to excel in music industry applications. Low impedance, Low ESR, Wide frequency range.
  • Operating temperature: -25°C to 70°C
  • Nominal Voltage: 500Vdc
  • Rated Capacitance: 30µF - 100 µF (depending on capacitor)
  • Capacitance tolerance (at 100Hz, 20°C): -10%+30%
  • Dissipation factor (at 100Hz, 20°C): 0.18
  • Leakage current (after 5 minutes application of rated voltage): 0.004 C.U.

1.66" length x 0.99" diameter 1.70" lead length.
Starting at $7.75