Capacitors

Capacitors are passive devices that are used in almost all electrical circuits for rectification, coupling and tuning. Also known as condensers, a capacitor is simply two electrical conductors separated by an insulating layer called a dielectric. The conductors are usually thin layers of aluminum foil, while the dielectric can be made up of many materials including paper, mylar, polypropylene, ceramic, mica, and even air. Electrolytic capacitors have a dielectric of aluminum oxide which is formed through the application of voltage after the capacitor is assembled. Characteristics of different capacitors are determined by not only the material used for the conductors and dielectric, but also by the thickness and physical spacing of the components.
Capacitor - 50V, 680pF, Ceramic Disc
Ceramic disc capacitor, 680 pF (.00068µF) rated for up to 50 V.
Non linear temperature coefficient of capacitance
$0.60
Capacitor - CE Mfg., 475V, 40/20/20/10µF
CE Manufacturing USA Made Multi Section Can Capacitor. Reproduced To Exact Mallory Specs Using Original Mallory Machinery. 40/20/20/10 capacitors like this can be found in Seeburg HF-R & HF-J jukebox amplifiers.
  • 40/20/20/10uF 475VDC Electrolytic.
  • FP / Twist Lock Style. Solder Tabs.
  • -10%, +50% Tolerance, 65°C Temperature Rating.
  • 1 ⅜"D X 2 ½"H.
  • All CE manufactured can capacitors have a two year warranty against manufactured defects.
$36.95
Capacitor - F&T, 500V, 16/16µF, Axial Lead Electrolytic
Dual section axial lead electrolytic capacitor from F&T with two 16uF sections rated for 500V. This type of cap is used in Marshall amps. The capacitor body has a 1" diameter and 2" length. Made in Germany.
$8.95
Capacitor - 0.01µF, 250V, Chicklet style, Axial Lead
Flat 0.01uF (10nF) film capacitor rated for 250V. Made of metallized polypropylene film, this capacitor is a great choice for audio applications. The style of this yellow capacitor is similar in appearance to the flat rectangular Philips 341 output caps found in original Fuzz Face pedals.
$1.35
Capacitor - CE Mfg., 500V, 30/30µF, Electrolytic
Reproduced To Exact Mallory Specs Using Original Mallory Machinery. 30/30uF 500VDC Electrolytic. FP / Twist Lock Style. Solder Lugs. -10%, +50% Tolerance, 55°C Temperature Rating. 1 3/8"D X 2 1/2"H.
$36.95
Cap Set - for Later 80s Marshall JCM800 2203, 4103 (100W Master)
Replacement electrolytic capacitor set.
Basic set includes:
  • (3) C-EC50-50-500CE
  • (2) C-ET10-160
Premium set includes:
  • (3) C-EC50-50-500FT (F&T)
  • (2) C-SA10-150 (Sprague Atom)
Warning: Some electrolytic capacitors can store charge even after the amp has been turned off and unplugged for some time. Always make sure your original electrolytic capacitors do not have a voltage present before touching them.
Starting at $28.95
package of 5
Capacitor - CE Mfg., 40/40/40/40µF, 525VDC, Electrolytic
CE Manufacturing USA Made Multi Section Can Capacitor. Reproduced To Exact Mallory Specs Using Original Mallory Machinery.
  • 40/40/40/40uF 525VDC.
  • FP / Twist Lock Style. Solder Tabs.
  • -10%, +50% Tolerance, 55°C Temperature Rating.
  • 1-⅜" Dia. X 3.6" H.
$40.95
Capacitor - CE Mfg., 200V, 100/100/100/20µF, Electrolytic
Made in the USA on Mallory's original machinery.
  • 4 sections - 100/100/100/20µF at 200V
  • -10%, +50% tolerance
  • 85° temperature rating
  • 1-3/8" dia. x 3" tall
$38.95
Cap Set - for Fender Showman AA763 / AB763, Black / Silverface
Replacement electrolytic capacitor set. Basic set includes:
  • (3) C-ET22-500-FT
  • (2) C-ET80-450-FT
  • (1) C-ET25-50
  • (5) C-ET25-25

Mod set includes:
  • (3) C-ET20-500-MOD
  • (2) C-ET70-350-MOD
  • (6) C-ET25-50-MOD

Premium set includes:
  • (3) C-SA20-500 (Sprague Atom)
  • (2) C-SA80-450 (Sprague Atom)
  • (1) C-SA25-50 (Sprague Atom)
  • (5) C-SA25-25 (Sprague Atom)

Warning: some electrolytic capacitors can store charge even after the amp has been turned off and unplugged for some time. Always make sure your original electrolytic capacitors do not have a voltage present before touching them.
Starting at $17.20
package of 11
Partially Out of Stock
Capacitor - CE Mfg., 20@450V x2, 100@50V x 2
USA made CE Manufacturing multi section electrolytic can capacitor. The four sections are - 20uF at 450VDC, 100uF at 50VDC, 100uF at 50VDC, and 20uF at 450VDC. Manufactured to Mallory specs on original Mallory machinery.
  • 20@450V x2,100@50V x 2 Electrolytic
  • FP / Twist Lock Style. Solder Tabs
  • -10%, +50% Tolerance, 85°C Temperature Rating
  • 1 ⅜"D X 2 ½"H
$36.95
Capacitor - 100V, 100µF, Radial Lead, Electrolytic
High quality, radial leaded, aluminum electrolytic capacitors rated at 100VDC.
$0.90
package of 5
Capacitor - CE Mfg., 350V, 100/100/20/20 μF
CE Manufacturing USA Made Multi Section Can Capacitor. Reproduced to exact Mallory specs using original Mallory machinery.
  • 100µF@350V, 100µF@350V, 20µF@350V, 20µF@350V
  • FP / Twist Lock Style. Solder Tabs.
  • -10%, +50% Tolerance, 85°C Temperature Rating.
  • 1 ⅜"D X 3.6"H.
  • All CE Manufacturing can capacitors have a two year warranty against manufactured defects.
$40.95
Capacitor - 250V, .068µF, Metal Film, ±10%
0.068uF Metal Film capacitor. ± 10% tolerance. Non-inductive self healing windings. Polyester film axial lead capacitor. 250 Volts.
$0.50
Capacitor - 475V, Axial Lead Electrolytic, Capacitance: 16 uF
  • 16µF, 475VDC
  • Rated for -25° C through +85° C
  • Tolerance ± 20%
  • Ripple current rated at 90mA rms at 120 Hz 105° C
  • Measures 26mm in length x 13mm in diameter.
$1.95
Capacitor - CE Mfg., 450V, 200/60 µF
CE Manufacturing USA Made Multi Section Can Capacitor. Reproduced to exact Mallory specs using original Mallory machinery.
  • 200µF@450V, 80µF@450V
  • FP / Twist Lock Style. Solder Tabs.
  • -10%, +50% Tolerance, 85°C Temperature Rating.
  • 1 ⅜"D X 3.6"H.
  • All CE Manufacturing can capacitors have a two year warranty against manufactured defects.
$40.95
Cap Set - for Fender Bassman 5F6A
Replacement electrolytic capacitor set. Basic set includes:
  • (4) C-ET22-500-FT
  • (1) C-ET10-450
  • (2) C-ET10-160
  • (1) C-ET220-50

Mod set includes:
  • (4) C-ET20-500-MOD
  • (1) C-ET8-475-MOD
  • (2) C-ET8-150-MOD
  • (1) C-ET250-25-MOD

Premium set includes:
  • (4) C-SA20-500 (Sprague Atom)
  • (1) C-SA8-450 (Sprague Atom)
  • (2) C-SA8-150 (Sprague Atom)
  • (1) C-SA250-25 (Sprague Atom)

Warning: some electrolytic capacitors can store charge even after the amp has been turned off and unplugged for some time. Always make sure your original electrolytic capacitors do not have a voltage present before touching them.
Starting at $14.00
package of 8
Partially Out of Stock
Capacitor - Axial Lead Electrolytic, 70µF, 100VDC
High quality low leakage axial lead electrolytic capacitor
  • 70uF/100V
  • Rated for 85° C operation
  • Tolerance: -20%, +50%
  • Measures 0.51" dia. x 0.84" length
$1.00
Capacitor - CDE, 500V, Silver Mica, Radial Lead, ±5%
High quality silver mica capacitors rated at 500V. These epoxy dipped capacitors made by Cornell Dubilier have a ±5% tolerance. The terminals are made of copper clad steel with a nickel undercoat and a 100% tin finish. Stability and mica go hand-in-hand when you need to count on stable capacitance over a wide temperature range. CDE’s standard dipped silvered mica capacitors are the first choice for timing and close tolerance applications.
Starting at $1.95
Capacitor - CE Mfg., 450V, 10/10/10/10µF, Electrolytic
CE Manufacturing USA Made Multi Section Can Capacitor. Reproduced To Exact Mallory Specs Using Original Mallory Machinery.
  • 10/10/10/10uF 450VDC.
  • FP / Twist Lock Style. Solder Tabs.
  • -10%, +50% Tolerance, 85°C Temperature Rating.
$36.95
Capacitor - Jupiter, Bumblebee, Paper in Oil, 400V, Axial Lead
Jupiter Condenser 400V Bumblebee capacitors made with aluminum foil paper-in-oil. As one of the earliest construction types, featuring a pure paper/oil construction complete with a true hermetic seal. The tone you crave and love, in the most accurate reproduction. Made in the USA of US-made materials. Construction is accurate to the original materials used in the Bumblebee Capacitors, featuring a true hermetic seal, Aluminum Foil, Paper-in-Mineral Oil with tinned copper leads. Hand painted to reproduce the look and feel of the original Bumblebees.
  • Voltage: 400VDC
  • Dielectric: Paper in Mineral Oil
  • Tolerance: +/- 10% Operating
  • Temperature: 85°C
  • Leads: 20awg Tinned OFC Copper
  • RoHS Compliant
  • Made in USA
$29.95
Capacitor - SoZo, 500V, NexGen Yellow Mustard Vintage
SoZo's Yellow Mustard line of polyester film tube amp capacitors have been thoroughly tested by LA’s best tube amp builders. They are handmade to exact vintage specs, and beat everything available, even in high gain situations.
After years of painstaking research and development, in 2003 SoZo Amplification began manufacturing the SoZo Mustard Cap™ capacitors, which quickly caught on among discriminating musicians and amp designers. Now, hundreds of thousands of capacitors later, SoZo has engineered capacitor product lines optimized for different products, including amps by Marshall™, Fender®, Vox®, HiWatt, and others, as well as professional sound gear from Neve, API, Neumann, Universal Audio, Urei, and virtually any quality gear from the 1950s on.
These caps are successful recreations of the originals and are superbly built and excellent-sounding caps. When one considers the audio signal passes through as many as ten capacitors before exiting the amplifier, you can see how these components play an extremely large role in the tone of the amplifier.
Starting at $4.25
Capacitor - Vishay Roederstein, 250V, 0.68 µF, MKT1813, Axial Lead
High quality 0.68uF axial capacitor rated at 250V. This value is popular for cathode bypass capacitors in many vintage Marshall amps. The 8.5x26.5mm size works well for turret board builds of these classic amplifiers. These MKT1813 capacitors are produced by Vishay Roederstein, formerly known as ERO. These capacitors are made with metalized polyester film and sealed in epoxy resin. Suggested applications include blocking, bypassing, filtering, timing, coupling and decoupling, interference suppression in low voltage applications. Features
  • Plastic-wrapped, epoxy resin sealed, flame retardant encapsulation
  • Non polar
  • Tubular metalized polyester film construction
  • ±10% tolerance
  • Axial leads
  • Operational life greater than 300,000 hours (40 °C/0.5 UR)
$2.35
Capacitor - CE Mfg., 60µF@525V, 40@525, 10@450, 25@50
Capacitor - Electrolytic, 60/525, 40/525, 10/450, 25/50
$36.95
Capacitor - Sprague Atom, Aluminum Electrolytic
Aluminum Capacitors +85 °C, axial lead. The best electrolytic money can buy. Features:
  • Low leakage current
  • Long shelf life
  • Ideal for application in TV sets, auto radios, radio-phone combinations, electronic testing equipment
Starting at $2.95
Partially Out of Stock