Capacitors
Capacitors are passive devices that are used in almost all electrical circuits for rectification, coupling and tuning. Also known as condensers, a capacitor is simply two electrical conductors separated by an insulating layer called a dielectric. The conductors are usually thin layers of aluminum foil, while the dielectric can be made up of many materials including paper, mylar, polypropylene, ceramic, mica, and even air. Electrolytic capacitors have a dielectric of aluminum oxide which is formed through the application of voltage after the capacitor is assembled.
Characteristics of different capacitors are determined by not only the material used for the conductors and dielectric, but also by the thickness and physical spacing of the components.
Capacitor - Solen, 250V, "Fast", Metalized Polypropylene
Made of the highest quality aluminum metalized polypropylene film available. Made in France. This superior concept significantly improved the electrical and mechanical characteristics of the film capacitor. They deliver a high level of performance that has never before been achieved.
Starting at $4.75
Capacitor - F&T, 500V, 16/16µF, Axial Lead Electrolytic
Dual section axial lead electrolytic capacitor from F&T with two 16uF sections rated for 500V. This type of cap is used in Marshall amps. The capacitor body has a 1" diameter and 2" length. Made in Germany.
$8.95
Capacitor - 0.01µF, 250V, Chicklet style, Axial Lead
Flat 0.01uF (10nF) film capacitor rated for 250V. Made of metallized polypropylene film, this capacitor is a great choice for audio applications. The style of this yellow capacitor is similar in appearance to the flat rectangular Philips 341 output caps found in original Fuzz Face pedals.
$1.35
Capacitor - CE Mfg., 350V, 50/50/50/50 μF
CE Manufacturing USA Made Multi Section Can Capacitor. Reproduced To Exact Mallory Specs Using Original Mallory Machinery.
- 50/50/50/50 μF 350VDC.
- FP / Twist Lock Style. Solder Tabs.
- -10%, +50% Tolerance, 85°C Temperature Rating.
- 1 3/8"D X 2 1/2"H.
$40.95
Capacitor - CE Mfg., 160V, 47/47µF, Electrolytic
CE Manufacturing multi-section electrolytic "Firecracker" style capacitor (modern polarized electrolytic caps in a tube for a vintage look). 47/47 µF ±20% @ 160 VDC. 7/8" diameter x 2-¾" length. Includes zip-tie and mount square. Great for antique radio restoration. Three wires (Red, Red, Black):
- Red to Black = 47 µF
$8.95
Capacitor - CE Mfg., 500V, 30/30µF, Electrolytic
Reproduced To Exact Mallory Specs Using Original Mallory Machinery. 30/30uF 500VDC Electrolytic. FP / Twist Lock Style. Solder Lugs. -10%, +50% Tolerance, 55°C Temperature Rating. 1 3/8"D X 2 1/2"H.
$36.95
Capacitor - 250V, .068µF, Metal Film, ±10%
0.068uF Metal Film capacitor. ± 10% tolerance. Non-inductive self healing windings. Polyester film axial lead capacitor. 250 Volts.
$0.50
Capacitor - JJ Electronics, 500V, 32/32μF, Electrolytic
Same diameter as LCR. Great for use in Marshall amplifiers. 1-3/8" dia. x 2" long
$9.95
Capacitor - Orange Drop, 1600V, Polypropylene
Radial lead, polypropylene film capacitor. ± 10% tolerance. Features a long history of proven reliability, a low dissipation factor, excellent stability, and a virtually linear temperature coefficient.
Starting at $1.49
Capacitor - 475V, Axial Lead Electrolytic, Capacitance: 16 uF
- 16µF, 475VDC
- Rated for -25° C through +85° C
- Tolerance ± 20%
- Ripple current rated at 90mA rms at 120 Hz 105° C
- Measures 26mm in length x 13mm in diameter.
$1.95
Capacitor - F&T, 475V, 16µF, Axial Lead
Electrolytic F&T axial lead electrolytic capacitor
Founded in 1948 by Heinz Fischer and Alfred Tausche, F&T Capacitors has over 60 years of experience in producing some of the finest capacitors available today. F&T Caps are known for their great tone and reliability
- 16uF/475V
- 0.63" dia. x 1.50" long
- Operating temperature range -40°C to 85°C
- Made in Germany
Founded in 1948 by Heinz Fischer and Alfred Tausche, F&T Capacitors has over 60 years of experience in producing some of the finest capacitors available today. F&T Caps are known for their great tone and reliability
$5.95
Cap Set - for Fender Bassman 5F6A
Replacement electrolytic capacitor set. Basic set includes:
Mod set includes:
Premium set includes:
Warning: some electrolytic capacitors can store charge even after the amp has been turned off and unplugged for some time. Always make sure your original electrolytic capacitors do not have a voltage present before touching them.
- (4) C-ET22-500-FT
- (1) C-ET10-450
- (2) C-ET10-160
- (1) C-ET220-50
Mod set includes:
- (4) C-ET20-500-MOD
- (1) C-ET8-475-MOD
- (2) C-ET8-150-MOD
- (1) C-ET250-25-MOD
Premium set includes:
- (4) C-SA20-500 (Sprague Atom)
- (1) C-SA8-450 (Sprague Atom)
- (2) C-SA8-150 (Sprague Atom)
- (1) C-SA250-25 (Sprague Atom)
Warning: some electrolytic capacitors can store charge even after the amp has been turned off and unplugged for some time. Always make sure your original electrolytic capacitors do not have a voltage present before touching them.
Starting at $14.00
package of 8
Capacitor - 50 V, 0.1 µF, Polyester
Polyester Film Capacitor used in MOD® Pedal Kits. Rated at 0.1µF 50V. Tolerance: 10%. Operating temperature: -40 C to +85 C
$1.10
Capacitor - Fender, .05 µF at 150V, Vintage '50s, Mylar & Tin
Fender offers a wide selection of Pure Vintage electronics to players looking to restore or upgrade their guitar or amplifier with classic Fender in mind. From potentiometers to select capacitors, tube sockets and more, these electronics are created to closely replicate original-era Fender parts and have been used on a number of Fender reissue instruments and amplifiers, including the American Vintage series of guitars and basses.
$25.95
Capacitor - Siemens, 250V, .1uF, Film
New old stock radial capacitors from Siemens with 10mm lead spacing. These 0.1uF film capacitors are rated for 250V. The construction matches the style found in vintage equipment such as the MKIII and MKIV Tone Bender pedals.
$5.95
Capacitor - CE Mfg., 525V, 80/40/30/20µF
CE Manufacturing USA Made Multi Section Can Capacitor. Reproduced To Exact Mallory Specs Using Original Mallory Machinery.
Great replacement for the can capacitor in the Princeton 6G2.
- 80/40/30/20uF 525VDC.
- FP / Twist Lock Style. Solder Tabs.
- -10%, +50% Tolerance, 55°C Temperature Rating.
- 1-3/8" Dia. X 3-1/2" H.
Great replacement for the can capacitor in the Princeton 6G2.
$43.95
Capacitor - 100pF, Variable, Single Section
This capacitor is used as a tuning capacitor in a variety of RF test equipment and ham radio gear. It's combination of low price, high maximum voltages, fairly large capacitances, and low-leakage L-4 grade ceramic have made it a popular configuration. Single section 100pf, screwdriver or knob adjustable, full rotation.
$32.20
Capacitor - Mod® Electronics, 600V, Oil Filled, Axial Lead
Mod® Electronics Oil Caps are high quality, hand-crafted capacitors that are the perfect choice for guitars, amplifiers, and all audio equipment. Each capacitor is impregnated with mineral oil for a void-free winding providing highly stable capacitance. The capacitor is hermetically sealed in an aluminum casing to ensure a long life. The detailed construction results in a precise capacitance with a tolerance of ±10%. Mod® Oil Caps also feature a red stripe to designate the outside foil.
Starting at $6.65
Capacitor - CE Mfg., 450V, 80/80/20µF
CE Manufacturing USA Made Multi Section Can Capacitor. Reproduced To Exact Mallory Specs Using Original Mallory Machinery
- 80/80/20uF - Electrolytic, 450 V (80uF sections) / 400V (20uF section)
- FP / Twist Lock Style. Solder Tabs
- -10%, +50% Tolerance, 55°C Temperature Rating
- 1 ⅜"D X 4"H
$36.95
Capacitor - JJ Electronics, 385V, 350µF, Electrolytic
JJ Electronic single-section electrolytic can capacitor, 350 µF -10%+30% @ 385 V, 1 3/8" diameter x 2" height (35 x 50 mm). Clamp mount, solder lug terminals. Excellent for music industry applications
$11.95
Capacitor - 630V, Metal Film, Tubular
± 10% tolerance. Non-inductive self healing windings. Polyester film axial lead capacitor. 630 Volts.
Starting at $0.60
Capacitor - CE Mfg., 450V, 60/30/30uF, Electrolytic
CE Manufacturing USA Made Multi Section Can Capacitor. Reproduced To Exact Mallory Specs Using Original Mallory Machinery.
All CE manufactured can capacitors have a two year warranty against manufactured defects.
- 60/30/30uF 450VDC Electrolytic.
- FP / Twist Lock Style. PCB Mount.
- -10%, +50% Tolerance, 85°C Temperature Rating.
- 1 3/8"D X 3"H.
All CE manufactured can capacitors have a two year warranty against manufactured defects.
$40.95
Capacitor - Illinois, 300V, 220µF, Axial Lead Electrolytic
Rated for 85 degree operation. Tolerance ±20%. Measures 1.03" diameter X 1.97" height
$8.95
Cap Set - for Fender Champ 5F1 (Tweed)
Replacement electrolytic capacitor set. Basic set includes closest generic values:
Mod set includes:
Premium set includes:
Warning: some electrolytic capacitors can store charge even after the amp has been turned off and unplugged for some time. Always make sure your original electrolytic capacitors do not have a voltage present before touching them.
- (1) C-ET22-450
- (2) C-ET10-450
- (1) C-ET25-25
Mod set includes:
- (1) C-ET16-475-MOD
- (2) C-ET8-475-MOD
- (1) C-ET25-50-MOD
Premium set includes:
- (1) C-SA16-475 (Sprague Atom)
- (2) C-SA8-450 (Sprague Atom)
- (1) C-SA25-25 (Sprague Atom)
Warning: some electrolytic capacitors can store charge even after the amp has been turned off and unplugged for some time. Always make sure your original electrolytic capacitors do not have a voltage present before touching them.
Starting at $4.85
package of 4