Capacitors

Capacitors are passive devices that are used in almost all electrical circuits for rectification, coupling and tuning. Also known as condensers, a capacitor is simply two electrical conductors separated by an insulating layer called a dielectric. The conductors are usually thin layers of aluminum foil, while the dielectric can be made up of many materials including paper, mylar, polypropylene, ceramic, mica, and even air. Electrolytic capacitors have a dielectric of aluminum oxide which is formed through the application of voltage after the capacitor is assembled. Characteristics of different capacitors are determined by not only the material used for the conductors and dielectric, but also by the thickness and physical spacing of the components.
Cap Set - for Fender Deluxe Reverb AB763 (Black face)
Package of 13
Replacement electrolytic capacitor set. Basic set includes:
  • (5) C-ET16-475-FT
  • (1) C-ET25-50
  • (7) C-ET25-25

Mod set includes:
  • (5) C-ET16-475-MOD
  • (8) C-ET25-50-MOD

Premium set includes:
  • (5) C-SA16-475 (Sprague Atom)
  • (1) C-SA25-50 (Sprague Atom)
  • (7) C-SA25-25 (Sprague Atom)

Warning: some electrolytic capacitors can store charge even after the amp has been turned off and unplugged for some time. Always make sure your original electrolytic capacitors do not have a voltage present before touching them.
Starting at $14.95
Capacitor - JJ Electronics, 385V, 550µF, Electrolytic
JJ Electronics aluminum electrolytic capacitor. Low impedance, low ESR, wide frequency range. For power supplies, high-end electronics, and industrial electronics. The aluminum case capacitors are supplied with PVC sleeve insulation and a safety vent located on end deck.
$13.50
Capacitor - CE Mfg., 450V, 60/30/30uF, Electrolytic
CE Manufacturing USA Made Multi Section Can Capacitor. Reproduced To Exact Mallory Specs Using Original Mallory Machinery.
  • 60/30/30uF 450VDC Electrolytic.
  • FP / Twist Lock Style. PCB Mount.
  • -10%, +50% Tolerance, 85°C Temperature Rating.
  • 1 3/8"D X 3"H.

All CE manufactured can capacitors have a two year warranty against manufactured defects.
$40.90
Capacitor - JJ Electronics, 385V, 100µF, Electrolytic
JJ Electronic single-section electrolytic can capacitor, 100 µF -10%+30% @ 385 V, 7/8" diameter x 1 5/8" height (22 x 42 mm). Snap-in PC mount terminals. Excellent for music industry applications
$7.95
Capacitor - CE Mfg., 33µ[email protected], 47µ[email protected], 22µ[email protected]
CE Manufacturing multi-section electrolytic "Firecracker" style capacitor (modern polarized electrolytic caps in a tube for a vintage look). 33/47 µF @ 160 VDC & 22 µF ±20% @ 25 VDC. 7/8" diameter x 2-¾" length. Includes zip-tie and mount square. Great for antique radio restoration. Four wires (Blue, Red, Orange, Black):
  • Blue to Black = 33 µF
  • Red to Black = 47 µF
  • Orange to Black = 22 µF
$8.95
Cap Set - for Fender Bassman AA864 (Black face)
Package of 10
Replacement electrolytic capacitor set. Basic set includes:
  • (3) C-ET22-500-FT
  • (2) C-ET80-450-FT
  • (1) C-ET25-50
  • (4) C-ET25-25

Mod set includes:
  • (3) C-ET20-500-MOD
  • (2) C-ET70-350-MOD
  • (5) C-ET25-50-MOD

Premium set includes:
  • (3) C-SA20-500 (Sprague Atom)
  • (2) C-SA80-450 (Sprague Atom)
  • (1) C-SA25-50 (Sprague Atom)
  • (4) C-SA25-25 (Sprague Atom)

Warning: some electrolytic capacitors can store charge even after the amp has been turned off and unplugged for some time. Always make sure your original electrolytic capacitors do not have a voltage present before touching them.
Starting at $16.55
Capacitor - CE Mfg., 475V, 30/20µF, Electrolytic
CE Manufacturing USA Made Multi Section Can Capacitor. Reproduced To Exact Mallory Specs Using Original Mallory Machinery. The C-EC30-20-475 is a great replacement for the original can capacitors found in H.H. Scott 299 amplifiers as well as others.
$36.70
Capacitor - CE Mfg., 160V, 33/33/47 µF, Electrolytic
Electrolytic capacitor, three sections 33uf, 33uf, 47uf at 160VDC. Measures 1" (diameter) x 3.7" (length).
$8.95
Cap set - for Fender Pro Reverb AA165 (Black face)
Package of 13
Replacement electrolytic capacitor set. Basic set includes:
  • (3) C-ET22-500-FT
  • (2) C-ET80-450-FT
  • (7) C-ET25-25
  • (1) C-ET25-50

Mod set includes:
  • (3) C-ET20-500-MOD
  • (2) C-ET70-350-MOD
  • (8) C-ET25-50-MOD

Premium set includes:
  • (3) C-SA20-500 (Sprague Atom)
  • (2) C-SA80-450 (Sprague Atom)
  • (7) C-SA25-25 (Sprague Atom)
  • (1) C-SA25-50 (Sprague Atom)

Warning: some electrolytic capacitors can store charge even after the amp has been turned off and unplugged for some time. Always make sure your original electrolytic capacitors do not have a voltage present before touching them.
Starting at $18.50
Capacitor - CE Mfg., 200V, 100/100/100/20µF, Electrolytic
Made in the USA on Mallory's original machinery.
  • 4 sections - 100/100/100/20µF at 200V
  • -10%, +50% tolerance
  • 85° temperature rating
  • 1-3/8" dia. x 3" tall
$38.95
Capacitor - JJ Electronics, 500V, 500µF, Electrolytic
JJ Electronic single-section electrolytic can capacitor, 500 µF -10%+30% @ 500 V. 1 3/8" diameter x 3 1/2" height (35 x 88 mm). Clamp mount, solder lug terminals. Excellent for music industry applications
$19.95
Capacitor - CE Mfg., 400 V, 60/40/40/40 μF
CE Manufacturing USA Made Multi Section Can Capacitor. Reproduced To Exact Mallory Specs Using Original Mallory Machinery.
  • 60/40/40/40uF 400VDC.
  • FP / Twist Lock Style. Solder Tabs.
  • -10%, +50% Tolerance, 85°C Temperature Rating.
  • 1 3/8"D X 3"H.

All CE manufactured can capacitors have a two year warranty against manufactured defects.
$40.90
Capacitor - CE Mfg., 800V (900V Surge), 16µF, Electrolytic
CE Manufacturing multi-section electrolytic "Firecracker" style capacitor (modern polarized electrolytic caps in a tube for a vintage look). 16 µF ±20% @ 800 VDC. 1-1/16" diameter x 4-½" length. Includes zip-tie and mount square. Great for antique radio restoration. Two wires (Blue, Black)
$10.95
Capacitor - CE Mfg., 525V, 30/30/20 μF
CE Manufacturing USA Made Multi section Can Capacitor. Reproduced To Exact Mallory Specs Using Original Mallory Machinery.
  • 30/30/20uF 525VDC Electrolytic.
  • FP / Twist Lock Style. Solder Tabs.
  • -10%, +50% Tolerance, 55°C Temperature Rating.
  • 1 ⅜"D X 3"H.
$39.95
Capacitor - CE Mfg., 160V, 33/47/47 µF, Electrolytic
CE Manufacturing multi-section electrolytic "Firecracker" style capacitor (modern polarized electrolytic caps in a tube for a vintage look). Made in the USA. 33/47/47 µF ±20% @ 160 VDC. 1-1/16" diameter x 3-¾" length. Includes zip-tie and mount square. Great for antique radio restoration. Four wires (Blue, Red, Red, Black):
  • Blue to Black = 33 µF
  • Red to Black = 47 µF
$8.95
Capacitor - CE Mfg., 350 V, 120/100/100/100 μF
CE Manufacturing USA Made Multi Section Can Capacitor. Reproduced To Exact Mallory Specs Using Original Mallory Machinery. Similar to Mallory FP417.26.
  • 120/100/100/100uF 350VDC.
  • FP / Twist Lock Style. Solder Tabs.
  • -10%, +50% Tolerance, 85°C Temperature Rating.
  • 1 ⅜" D X 3.5" H.
  • All CE manufactured can capacitors have a two year warranty against manufactured defects.
$40.95
Cap Set - for Fender Showman AA763 / AB763, Black / Silverface
Package of 11
Replacement electrolytic capacitor set. Basic set includes:
  • (3) C-ET22-500-FT
  • (2) C-ET80-450-FT
  • (1) C-ET25-50
  • (5) C-ET25-25

Mod set includes:
  • (3) C-ET20-500-MOD
  • (2) C-ET70-350-MOD
  • (6) C-ET25-50-MOD

Premium set includes:
  • (3) C-SA20-500 (Sprague Atom)
  • (2) C-SA80-450 (Sprague Atom)
  • (1) C-SA25-50 (Sprague Atom)
  • (5) C-SA25-25 (Sprague Atom)

Warning: some electrolytic capacitors can store charge even after the amp has been turned off and unplugged for some time. Always make sure your original electrolytic capacitors do not have a voltage present before touching them.
Starting at $17.20
Capacitor - CE Manufacturing, 2x 40µF/450V, 2x 25µF/50V
CE Manufacturing USA Made Multi Section Can Capacitor. Reproduced To Exact Mallory Specs Using Original Mallory Machinery. 40uF @ 450V, 40uF @ 450V, 25uF @ 50V, 25uF @ 50V. FP / Twist Lock Style. Solder Tabs.
$38.80
Capacitor - CE Mfg., 200V, 100/100/100µF, Electrolytic
Made in the USA on Mallory's original machinery. Used in Marantz 10B tuner.
$38.95
Cap Set - for Early 80s Marshall JCM800 2203, 4103 (100W Master)
Package of 8
Replacement electrolytic capacitor set.
Basic set includes:
  • (6) C-EC50-50-500CE
  • (2) C-ET10-160
Premium set includes:
  • (6) C-EC50-50-500FT (F&T)
  • (2) C-SA10-150 (Sprague Atom)
Warning: some electrolytic capacitors can store charge even after the amp has been turned off and unplugged for some time. Always make sure your original electrolytic capacitors do not have a voltage present before touching them.
Starting at $54.80
Cap Set - for Later 80s Marshall JCM800 2203, 4103 (100W Master)
Package of 5
Replacement electrolytic capacitor set.
Basic set includes:
  • (3) C-EC50-50-500CE
  • (2) C-ET10-160
Premium set includes:
  • (3) C-EC50-50-500FT (F&T)
  • (2) C-SA10-150 (Sprague Atom)
Warning: Some electrolytic capacitors can store charge even after the amp has been turned off and unplugged for some time. Always make sure your original electrolytic capacitors do not have a voltage present before touching them.
Starting at $27.95
Capacitor - CE Mfg., 450V, 15/15/15/10µF, Electrolytic
CE Manufacturing USA-made Multi Section Can Capacitor. Reproduced To Exact Mallory Specs Using Original Mallory Machinery.
  • 15/15/15/10 µF 450VDC
  • -FP / Twist Lock Style. Solder Tabs.
  • -10%, +50% Tolerance
  • -85°C Temperature Rating.
  • -1 ⅜"D X 2 ½"H.
$39.95
Cap Set - for Fender Bassman 5F6A
Package of 8
Replacement electrolytic capacitor set. Basic set includes:
  • (4) C-ET22-500-FT
  • (1) C-ET10-450
  • (2) C-ET10-160
  • (1) C-ET220-50

Mod set includes:
  • (4) C-ET20-500-MOD
  • (1) C-ET8-475-MOD
  • (2) C-ET8-150-MOD
  • (1) C-ET250-25-MOD

Premium set includes:
  • (4) C-SA20-500 (Sprague Atom)
  • (1) C-SA8-450 (Sprague Atom)
  • (2) C-SA8-150 (Sprague Atom)
  • (1) C-SA250-25 (Sprague Atom)

Warning: some electrolytic capacitors can store charge even after the amp has been turned off and unplugged for some time. Always make sure your original electrolytic capacitors do not have a voltage present before touching them.
Starting at $14.00
Capacitor - CE Mfg., 450V, 80/40/40µF
CE Manufacturing USA Made Multi Section Can Capacitor. Reproduced To Exact Mallory Specs Using Original Mallory Machinery
  • 80/40/40uF - 450VDC Electrolytic
  • FP / Twist Lock Style. Solder Tabs
  • -10%, +50% Tolerance, 55°C Temperature Rating
  • 1 ⅜"D X 4"H
$36.70