Capacitors

USA made CE Manufacturing multi section electrolytic can capacitor. The four sections are - 20uF at 450VDC, 100uF at 50VDC, 100uF at 50VDC, and 20uF at 450VDC. Manufactured to Mallory specs on original Mallory machinery.

• 20@450V x2,100@50V x 2 Electrolytic
• FP / Twist Lock Style. Solder Tabs
• -10%, +50% Tolerance, 85°C Temperature Rating
• 1 ⅜"D X 2 ½"H

High quality, radial leaded, aluminum electrolytic capacitors rated at 100VDC.

CE Manufacturing USA Made Multi Section Can Capacitor. Reproduced to exact Mallory specs using original Mallory machinery.

• 100µF@350V, 100µF@350V, 20µF@350V, 20µF@350V
• FP / Twist Lock Style. Solder Tabs.
• -10%, +50% Tolerance, 85°C Temperature Rating.
• 1 ⅜"D X 3.6"H.
• All CE Manufacturing can capacitors have a two year warranty against manufactured defects.

0.068uF Metal Film capacitor. ± 10% tolerance. Non-inductive self healing windings. Polyester film axial lead capacitor. 250 Volts.

• 16µF, 475VDC
• Rated for -25° C through +85° C
• Tolerance ± 20%
• Ripple current rated at 90mA rms at 120 Hz 105° C
• Measures 26mm in length x 13mm in diameter.

CE Manufacturing USA Made Multi Section Can Capacitor. Reproduced to exact Mallory specs using original Mallory machinery.

• 200µF@450V, 80µF@450V
• FP / Twist Lock Style. Solder Tabs.
• -10%, +50% Tolerance, 85°C Temperature Rating.
• 1 ⅜"D X 3.6"H.
• All CE Manufacturing can capacitors have a two year warranty against manufactured defects.

Replacement electrolytic capacitor set. Basic set includes:

• (4) C-ET22-500-FT
• (1) C-ET10-450
• (2) C-ET10-160
• (1) C-ET220-50

Mod set includes:

• (4) C-ET20-500-MOD
• (1) C-ET8-475-MOD
• (2) C-ET8-150-MOD
• (1) C-ET250-25-MOD

Premium set includes:

• (4) C-SA20-500 (Sprague Atom)
• (1) C-SA8-450 (Sprague Atom)
• (2) C-SA8-150 (Sprague Atom)
• (1) C-SA250-25 (Sprague Atom)

Warning: some electrolytic capacitors can store charge even after the amp has been turned off and unplugged for some time. Always make sure your original electrolytic capacitors do not have a voltage present before touching them.

High quality low leakage axial lead electrolytic capacitor

• 70uF/100V
• Rated for 105° C operation
• Tolerance: -20%, +20%
• Measures 0.4" dia. x 0.84" length

High quality silver mica capacitors rated at 500V. These epoxy dipped capacitors made by Cornell Dubilier have a ±5% tolerance. The terminals are made of copper clad steel with a nickel undercoat and a 100% tin finish. Stability and mica go hand-in-hand when you need to count on stable capacitance over a wide temperature range. CDE’s standard dipped silvered mica capacitors are the first choice for timing and close tolerance applications.

CE Manufacturing USA Made Multi Section Can Capacitor. Reproduced To Exact Mallory Specs Using Original Mallory Machinery.

• 10/10/10/10uF 450VDC.
• FP / Twist Lock Style. Solder Tabs.
• -10%, +50% Tolerance, 85°C Temperature Rating.

Jupiter Condenser 400V Bumblebee capacitors made with aluminum foil paper-in-oil. As one of the earliest construction types, featuring a pure paper/oil construction complete with a true hermetic seal. The tone you crave and love, in the most accurate reproduction. Made in the USA of US-made materials. Construction is accurate to the original materials used in the Bumblebee Capacitors, featuring a true hermetic seal, Aluminum Foil, Paper-in-Mineral Oil with tinned copper leads. Hand painted to reproduce the look and feel of the original Bumblebees.

• Voltage: 400VDC
• Dielectric: Paper in Mineral Oil
• Tolerance: +/- 10% Operating
• Temperature: 85°C
• Leads: 20awg Tinned OFC Copper
• RoHS Compliant
• Made in USA

Circular clamp for mounting multi-section can capacitors directly to chassis. This clamp is for use with 1 3/8" (1.375") diameter capacitors. Includes one clamp with tightening hardware. Mounting hardware is sold separately.

• Mounting hole center to center - 1.938"
• Mounting holes - .188" x .281"

SoZo's Yellow Mustard line of polyester film tube amp capacitors have been thoroughly tested by LA’s best tube amp builders. They are handmade to exact vintage specs, and beat everything available, even in high gain situations.
After years of painstaking research and development, in 2003 SoZo Amplification began manufacturing the SoZo Mustard Cap™ capacitors, which quickly caught on among discriminating musicians and amp designers. Now, hundreds of thousands of capacitors later, SoZo has engineered capacitor product lines optimized for different products, including amps by Marshall™, Fender®, Vox®, HiWatt, and others, as well as professional sound gear from Neve, API, Neumann, Universal Audio, Urei, and virtually any quality gear from the 1950s on.
These caps are successful recreations of the originals and are superbly built and excellent-sounding caps. When one considers the audio signal passes through as many as ten capacitors before exiting the amplifier, you can see how these components play an extremely large role in the tone of the amplifier.

High quality 0.68uF axial capacitor rated at 250V. This value is popular for cathode bypass capacitors in many vintage Marshall amps. The 8.5x26.5mm size works well for turret board builds of these classic amplifiers. These MKT1813 capacitors are produced by Vishay Roederstein, formerly known as ERO. These capacitors are made with metalized polyester film and sealed in epoxy resin. Suggested applications include blocking, bypassing, filtering, timing, coupling and decoupling, interference suppression in low voltage applications. Features

• Plastic-wrapped, epoxy resin sealed, flame retardant encapsulation
• Non polar
• Tubular metalized polyester film construction
• ±10% tolerance
• Axial leads
• Operational life greater than 300,000 hours (40 °C/0.5 UR)

Capacitor - Electrolytic, 60/525, 40/525, 10/450, 25/50

Aluminum Capacitors +85 °C, axial lead. The best electrolytic money can buy. Features:

• Low leakage current
• Long shelf life
• Ideal for application in TV sets, auto radios, radio-phone combinations, electronic testing equipment

Fender offers a wide selection of Pure Vintage electronics to players looking to restore or upgrade their guitar or amplifier with classic Fender in mind. From potentiometers to select capacitors, tube sockets and more, these electronics are created to closely replicate original-era Fender parts and have been used on a number of Fender reissue instruments and amplifiers, including the American Vintage series of guitars and basses.

New old stock radial capacitors from Siemens with 10mm lead spacing. These 0.1uF film capacitors are rated for 250V. The construction matches the style found in vintage equipment such as the MKIII and MKIV Tone Bender pedals.

Mod® Electronics Oil Caps are high quality, hand-crafted capacitors that are the perfect choice for guitars, amplifiers, and all audio equipment. Each capacitor is impregnated with mineral oil for a void-free winding providing highly stable capacitance. The capacitor is hermetically sealed in an aluminum casing to ensure a long life. The detailed construction results in a precise capacitance with a tolerance of ±10%. Mod® Oil Caps also feature a red stripe to designate the outside foil.

Replacement electrolytic capacitor set.
Basic set includes:

• (2) C-EC100-385
• (2) C-ET33-450
• (2) C-ET22-450
• (2) C-ET10-160
• (2) C-ET47-50

Premium set includes:

• (2) C-EC100-385 (JJ)
• (2) C-SA40-500 (Sprague Atom)
• (2) C-SA16-475 (Sprague Atom)
• (2) C-SA10-150 (Sprague Atom)
• (2) C-SA50-50 (Sprague Atom)

Warning: Some electrolytic capacitors can store charge even after the amp has been turned off and unplugged for some time.

High quality radial capacitors rated at 100V. These MKT368 capacitors are produced by Vishay BC and formerly by Philips. These capacitors are made with metalized polyester film and sealed in epoxy lacquer. Their style and make is similar to the tropical fish capacitors of the 1960s and 70s. Suggested applications include blocking, bypassing, filtering, coupling and energy reservoir applications. Features

• Polyester film dielectric
• Vacuum deposited aluminum electrodes
• Wound mono construction
• Flame retardant epoxy material (UL-class 94 V-0)
• Tinned wire radial leads
• Performance Grade 1 (long life)
• ±10% tolerance
• Rated 100VDC

Voltage Rating SKU 100V C-368-X-100 250V C-368-X-250 400V C-368-X-400

CE Manufacturing USA Made Multi Section Can Capacitor. Reproduced To Exact Mallory Specs Using Original Mallory Machinery. The C-EC30-20-475 is a great replacement for the original can capacitors found in H.H. Scott 299 amplifiers as well as others.

Replacement electrolytic capacitor set. Basic set includes:

• (3) C-ET22-500-FT
• (2) C-ET80-450-FT
• (1) C-ET50-50
• (7) C-ET25-25

Mod set includes:

• (3) C-ET20-500-MOD
• (2) C-ET70-350-MOD
• (1) C-ET50-50-MOD
• (7) C-ET25-50-MOD

Premium set includes:

• (3) C-SA20-500 (Sprague Atom)
• (2) C-SA80-450 (Sprague Atom)
• (1) C-SA50-50 (Sprague Atom)
• (7) C-SA25-25 (Sprague Atom)

Warning: some electrolytic capacitors can store charge even after the amp has been turned off and unplugged for some time. Always make sure your original electrolytic capacitors do not have a voltage present before touching them.

High quality axial-leaded electrolytic capacitors. These 021 ASM series capacitors are produced by Vishay BC, formerly known as Philips / BC. These capacitors have been produced for many years and can be found in a wide variety of music equipment ranging from vintage amps by Vox and Marshall to classic fuzz pedals such as the Fuzz Face and Tonebender. Suggested applications include general purpose use, industrial, automotive, audio-video, coupling, decoupling, smoothing, filtering, buffering, portable and mobile equipment. Features

• Long useful life: 2500 h to 8000 h at 85 °C
• Miniaturized, high CV-product per unit volume
• Charge and discharge proof
• Polarized aluminum electrolytic capacitors, non-solid electrolyte
• Axial leads, cylindrical aluminum case, insulated with a blue sleeve