You are here

Capacitors

Capacitors are passive devices that are used in almost all electrical circuits for rectification, coupling and tuning. Also known as condensers, a capacitor is simply two electrical conductors separated by an insulating layer called a dielectric. The conductors are usually thin layers of aluminum foil, while the dielectric can be made up of many materials including paper, mylar, polypropylene, ceramic, mica, and even air. Electrolytic capacitors have a dielectric of aluminum oxide which is formed through the application of voltage after the capacitor is assembled.

Characteristics of different capacitors are determined by not only the material used for the conductors and dielectric, but also by the thickness and physical spacing of the components.

Filter these results
Sort By:
products per page
View Mode: List View · Grid View

Pages

(10 pages)
C-ETKITCapacitor - Set Of Axial Lead Electrolytic, 8 Values, 6 Of Each
Package of 48
Don't pass up this deal! Several popular electrolytic values have been put into a kit for your convenience. Save 15% over individual prices. 6 of each of the following values:
22 µF @ 50 VDC
22 µF @ 160 VDC
22 µF @ 450 VDC
33 µF @ 160 VDC
33 µF @ 450 VDC
47 µF @ 450 VDC
100 µF @ 160 VDC
100 µF @ 450 VDC
$93.32
Click to read more
C-SACapacitor - Sprague Atom, Aluminum Electrolytic

Aluminum Capacitors +85 °C, axial Lead. The best electrolytic money can buy.


Starting at $2.50
Click to read more
C-EC60401025Capacitor - CE Mfg., 60µF@525V, 40@525, 10@450, 25@50

Capacitor - Electrolytic, 60/525, 40/525, 10/450, 25/50


$36.70
Click to read more
C-ET100-25-ILCapacitor - Illinois, 25V, 100µF, Axial Lead Electrolytic

Rated for 85 degree operation. Tolerance ±20%


$0.55
Click to read more
C-EC1020X3-450Capacitor - CE Mfg., 450V, 20/20/20/10µF, Electrolytic
  • CE Manufacturing USA Made Multi Section Can Capacitor. Reproduced To Exact Mallory Specs Using Original Mallory Machinery.
  • 20/20/20/10uF 450VDC.
  • FP / Twist Lock Style. Solder Tabs.
  • -10%, +50% Tolerance, 85°C Temperature Rating.

$30.50
Click to read more
C-EC10X4-450Capacitor - CE Mfg., 450V, 10/10/10/10µF, Electrolytic
  • CE Manufacturing USA Made Multi Section Can Capacitor. Reproduced To Exact Mallory Specs Using Original Mallory Machinery.
  • 10/10/10/10uF 450VDC.
  • FP / Twist Lock Style. Solder Tabs.
  • -10%, +50% Tolerance, 85°C Temperature Rating.

$31.45
Click to read more
C-EC16-16-500Capacitor - JJ Electronics, 500V, 16/16µF, Electrolytic

JJ Electronics aluminum electrolytic capacitor. Low impedance, low ESR, wide frequency range. For power supplies, high-end exlectronics, and industrial electronics.



  • Rated voltage: 16/16µF
  • Operating temperature: -25°C - 70°C
  • Rated voltage: 500VDC
  • Capacitance tolerance (at 100Hz, 20°C): -10% + 30%
  • Dissipation factor (at 100Hz, 20°C): 0.15 - 0.25


The aluminum case capacitors are supplied with PVC sleeve insulation and a safety vent located on end deck. Load life is 1000 hours (at maximum operating temperature, rated voltage, and AC current load)


$8.25
Click to read more
C-EC20X3-450Capacitor - CE Mfg., 450V, 20/20/20µF, Electrolytic

CE Manufacturing USA made multi section can capacitor. 3 sections 20µF at 450VDC. 85°C temp rating.


$37.75
Click to read more
C-EC40X4-450Capacitor - CE Mfg., 450V, 40/40/40/40µF, Electrolytic

CE Manufacturing USA made multi section can capacitor. Reproduced to Mallory specs using original Mallory machinery. 85°C temperature rating.


$38.80
Click to read more
C-ET33-50-ILCapacitor - Illinois, 50V, 33µF, Axial Lead Electrolytic
Polarized electrolytic capacitor with axial leads. Capacitance of 33uF and rated for 50V max.
$0.49
Click to read more

Pages

(10 pages)
Don't see a product you're looking for? Send us your product suggestions!
Subscribe to RSS - Capacitors