Capacitors

Capacitors are passive devices that are used in almost all electrical circuits for rectification, coupling and tuning. Also known as condensers, a capacitor is simply two electrical conductors separated by an insulating layer called a dielectric. The conductors are usually thin layers of aluminum foil, while the dielectric can be made up of many materials including paper, mylar, polypropylene, ceramic, mica, and even air. Electrolytic capacitors have a dielectric of aluminum oxide which is formed through the application of voltage after the capacitor is assembled. Characteristics of different capacitors are determined by not only the material used for the conductors and dielectric, but also by the thickness and physical spacing of the components.
Capacitor - JJ Electronics, 500V, 40/20/20/20µF, Electrolytic
JJ Electronic multi-section electrolytic can capacitor, 40/20/20/20 µF -10%+30% @ 500 V. 1-1/2" diameter x 2" height (40 x 50 mm). Clamp mount, solder lug terminals. Excellent for music industry applications
$15.70
On Backorder
Capacitor - CE Mfg., 500V, 40/20/20 μF
CE Manufacturing USA Made Multi Section Can Capacitor. Reproduced To Exact Mallory Specs Using Original Mallory Machinery.
  • 40/20/20uF 500VDC Electrolytic.
  • FP / Twist Lock Style. Solder Tabs.
  • -10%, +50% Tolerance, 55°C Temperature Rating.
  • 1 3/8"D X 2 1/2"H.
$38.80
Capacitor - JJ Electronics, 500V, 32/32μF, Electrolytic
Same diameter as LCR. Great for use in Marshall amplifiers. 1-3/8" dia. x 2" long
$8.45
Capacitor - 500V, 32/32µF, Electrolytic
This low ripple capacitor tests superior to any other capacitor of its value currently being made. Commonly used as filter capacitors in guitar amps. 32μF + 32μF @ 500VDC. 1-3/8" dia. x 2" tall. Requires clamp - S-H122. Replacement for LCR.
$7.50
Capacitor - 500V, 50/50μF, Electrolytic
This low ripple capacitor tests superior to any other capacitor of its value currently being made. Commonly used as filter capacitors in guitar amps. 50 μF + 50 μF @ 500 VDC. 1 3/8" diameter x 2 3/16" tall. Requires clamp - S-H122. Replacement for LCR.
$8.25
Capacitor - JJ Electronics, 500V, 50/50µF, Electrolytic
Same diameter as LCR. Great for use in Marshall amplifiers. 1-3/8" diameter x 2" tall. S-H122 is a good mounting clamp for this can
$8.95
Capacitor - CE Mfg., 500V, 100/100µF
CE Manufacturing USA Made Multi Section Can Capacitor. Reproduced To Exact Mallory Specs Using Original Mallory Machinery
  • 100/100uF - 500VDC Electrolytic
  • FP / Twist Lock Style. Solder Tabs
  • -10%, +50% Tolerance, 55°C Temperature Rating
  • 1 ⅜"D X 4"H
$40.90
Capacitor - JJ Electronics, 500V, 100/100µF, Electrolytic
Same diameter as LCR. Great for use in Marshall amplifiers. 1-3/8" dia. x 2 7/8" height. S-H122 is a good mounting clamp for this can
$11.50
Capacitor - JJ Electronics, 500V, 250µF, Electrolytic
JJ Electronic single-section electrolytic can capacitor, 250 µF -10%+30% @ 500 V, 1 3/8" diameter x 2 3/4" height (35 x 68 mm). Clamp mount, solder lug terminals. Excellent for music industry applications
$12.95
Capacitor - CE Manufacturing, 2x 40µF/450V, 2x 25µF/50V
CE Manufacturing USA Made Multi Section Can Capacitor. Reproduced To Exact Mallory Specs Using Original Mallory Machinery. 40uF @ 450V, 40uF @ 450V, 25uF @ 50V, 25uF @ 50V. FP / Twist Lock Style. Solder Tabs.
$38.80
Capacitor - JJ Electronics, 500V, 16/16µF, Electrolytic
JJ Electronics aluminum electrolytic capacitor. Low impedance, low ESR, wide frequency range. For power supplies, high-end exlectronics, and industrial electronics.
  • Rated voltage: 16/16µF
  • Operating temperature: -25°C - 70°C
  • Rated voltage: 500VDC
  • Capacitance tolerance (at 100Hz, 20°C): -10% + 30%
  • Dissipation factor (at 100Hz, 20°C): 0.15 - 0.25

The aluminum case capacitors are supplied with PVC sleeve insulation and a safety vent located on end deck. Load life is 1000 hours (at maximum operating temperature, rated voltage, and AC current load)
$8.25
Capacitor - CE Mfg., 500V, 30/30µF, Electrolytic
Reproduced To Exact Mallory Specs Using Original Mallory Machinery. 30/30uF 500VDC Electrolytic. FP / Twist Lock Style. Solder Lugs. -10%, +50% Tolerance, 55°C Temperature Rating. 1 3/8"D X 2 1/2"H.
$36.70