Capacitors

Capacitors are passive devices that are used in almost all electrical circuits for rectification, coupling and tuning. Also known as condensers, a capacitor is simply two electrical conductors separated by an insulating layer called a dielectric. The conductors are usually thin layers of aluminum foil, while the dielectric can be made up of many materials including paper, mylar, polypropylene, ceramic, mica, and even air. Electrolytic capacitors have a dielectric of aluminum oxide which is formed through the application of voltage after the capacitor is assembled. Characteristics of different capacitors are determined by not only the material used for the conductors and dielectric, but also by the thickness and physical spacing of the components.
Capacitor - Illinois, 500V, Axial Lead Electrolytic
Illinois Capacitor Inc. high quality low leakage axial lead electrolytic capacitor
Starting at $4.25
Capacitor - F&T, 500V, Type A, Axial Lead
Axial lead electrolytic capacitors from F&T. The capacitors have an operating temperature range -40°C to 85°C. Made in Germany.
Starting at $4.25
Capacitor - F&T, Multi-Section, Electrolytic
High quality multi-section can capacitors from F&T. These capacitors are similar to the LCR caps found in many Marshall and Hiwatt amplifiers. The body has a 1-⅜" diameter and a 2" length. A 1-⅜" mounting clamp is required. Made in Germany.
Starting at $10.95
Capacitor - JJ Electronics, 500V, Axial Lead Electrolytic
Electrolytic axial capacitor rated at 500 Volts. These capacitors have special features which enable them to excel in music industry applications. Low impedance, Low ESR, Wide frequency range.
  • Operating temperature: -25°C to 70°C
  • Nominal Voltage: 500Vdc
  • Rated Capacitance: 30µF - 100 µF (depending on capacitor)
  • Capacitance tolerance (at 100Hz, 20°C): -10%+30%
  • Dissipation factor (at 100Hz, 20°C): 0.18
  • Leakage current (after 5 minutes application of rated voltage): 0.004 C.U.

1.66" length x 0.99" diameter 1.70" lead length.
Starting at $7.75
Capacitor - JJ Electronics, 500V, 40/20/20/20µF, Electrolytic
JJ Electronic multi-section electrolytic can capacitor, 40/20/20/20 µF -10%+30% @ 500 V. 1-1/2" diameter x 2" height (40 x 50 mm). Clamp mount, solder lug terminals. Excellent for music industry applications
$18.95
Capacitor - CE Mfg., 500V, 40/20/20 μF
CE Manufacturing USA Made Multi Section Can Capacitor. Reproduced To Exact Mallory Specs Using Original Mallory Machinery.
  • 40/20/20uF 500VDC Electrolytic.
  • FP / Twist Lock Style. Solder Tabs.
  • -10%, +50% Tolerance, 55°C Temperature Rating.
  • 1 3/8"D X 2 1/2"H.
$38.95
Capacitor - 500V, 32/32µF, Electrolytic
This low ripple capacitor tests superior to any other capacitor of its value currently being made. Commonly used as filter capacitors in guitar amps. 32μF + 32μF @ 500VDC. 1-3/8" dia. x 2" tall. Requires clamp - S-H122. Replacement for LCR. The common negative terminal is dotted.
$7.95
Capacitor - JJ Electronics, 500V, 32/32μF, Electrolytic
Same diameter as LCR. Great for use in Marshall amplifiers. 1-3/8" dia. x 2" long
$9.95
Capacitor - 500V, 50/50μF, Electrolytic
This low ripple capacitor tests superior to any other capacitor of its value currently being made. Commonly used as filter capacitors in guitar amps. 50 μF + 50 μF @ 500 VDC. 1 3/8" diameter x 2 3/16" tall. Requires clamp - S-H122. Replacement for LCR. The common negative terminal is dotted.
$9.25
Capacitor - JJ Electronics, 500V, 50/50µF, Electrolytic
Same diameter as LCR. Great for use in Marshall amplifiers. 1-3/8" diameter x 2" tall. S-H122 is a good mounting clamp for this can
$10.95
Capacitor - CE Mfg., 500V, 100/100µF
CE Manufacturing USA Made Multi Section Can Capacitor. Reproduced To Exact Mallory Specs Using Original Mallory Machinery
  • 100/100uF - 500VDC Electrolytic
  • FP / Twist Lock Style. Solder Tabs
  • -10%, +50% Tolerance, 55°C Temperature Rating
  • 1 ⅜"D X 4"H
$40.95
Capacitor - JJ Electronics, 500V, 100/100µF, Electrolytic
Same diameter as LCR. Great for use in Marshall amplifiers. 1-3/8" dia. x 2 7/8" height. S-H122 is a good mounting clamp for this can
$12.95
Capacitor - JJ Electronics, 500V, 250µF, Electrolytic
JJ Electronic single-section electrolytic can capacitor, 250 µF -10%+30% @ 500 V, 1 3/8" diameter x 2 3/4" height (35 x 68 mm). Clamp mount, solder lug terminals. Excellent for music industry applications
$16.25
Capacitor - JJ Electronics, 500V, 500µF, Electrolytic
JJ Electronic single-section electrolytic can capacitor, 500 µF -10%+30% @ 500 V. 1 3/8" diameter x 3 1/2" height (35 x 88 mm). Clamp mount, solder lug terminals. Excellent for music industry applications
$21.95
Capacitor - Sprague Atom, Aluminum Electrolytic
Aluminum Capacitors +85 °C, axial lead. The best electrolytic money can buy. Features:
  • Low leakage current
  • Long shelf life
  • Ideal for application in TV sets, auto radios, radio-phone combinations, electronic testing equipment
Starting at $2.95
Partially Out of Stock
Capacitor - F&T, 500V, 16/16µF, Axial Lead Electrolytic
Dual section axial lead electrolytic capacitor from F&T with two 16uF sections rated for 500V. This type of cap is used in Marshall amps. The capacitor body has a 1" diameter and 2" length. Made in Germany.
$8.95
Capacitor - CE Mfg., 40µF/500V, 40µF/450V, 40µF/400V, 20µF/300V
CE Manufacturing USA Made Multi Section Can Capacitor. Reproduced To Exact Mallory Specs Using Original Mallory Machinery. This cap is used in the Fisher 500 C amplifier (capacitor C91).
  • 40uF@500V, 40uF@450V, 40uF@400V, 20uF@300V.
  • FP / Twist Lock Style. Solder Tabs.
  • -10%, +50% Tolerance, 85°C Temperature Rating.
  • 1 ⅜"D X 3"H.
$36.95
Capacitor - CE Manufacturing, 2x 40µF/450V, 2x 25µF/50V
CE Manufacturing USA Made Multi Section Can Capacitor. Reproduced To Exact Mallory Specs Using Original Mallory Machinery. 40uF @ 450V, 40uF @ 450V, 25uF @ 50V, 25uF @ 50V. FP / Twist Lock Style. Solder Tabs.
$38.95
Capacitor - Mod® Electronics, Aluminum Electrolytic, 105°C, Axial Lead
Mod® Electronics electrolytic capacitors provide builders with quality capacitors that offer long-lasting performance at the highest degree. These capacitors are designed with tube amplifiers in mind; each capacitor is rated at 105°C. This temperature rating provides a highly-stable capacitance in any device, be it vacuum tube or solid state. The Mod® electrolytic capacitor line features capacitance values that are common in many vintage amplifiers but are not readily available today. Builders and techs can confidently use these capacitors to match the original specifications of their equipment.
Starting at $0.65
Capacitor - JJ Electronics, 500V, 16/16µF, Electrolytic
JJ Electronics aluminum electrolytic capacitor. Low impedance, low ESR, wide frequency range. For power supplies, high-end exlectronics, and industrial electronics.
  • Rated voltage: 16/16µF
  • Operating temperature: -25°C - 70°C
  • Rated voltage: 500VDC
  • Capacitance tolerance (at 100Hz, 20°C): -10% + 30%
  • Dissipation factor (at 100Hz, 20°C): 0.15 - 0.25

The aluminum case capacitors are supplied with PVC sleeve insulation and a safety vent located on end deck. Load life is 1000 hours (at maximum operating temperature, rated voltage, and AC current load)
$9.95
Capacitor - Jupiter, Cosmos, Wet Electrolytic, Axial Lead
The Cosmos Wet Electrolytic Capacitors present a new axial range from Jupiter Condenser. Inspired from and designs based on early American Wet Electrolytic capacitors used in audio amplifiers, guitar amplifiers, and pro audio applications. Available ranging from 10uF to 250uF and voltages from 25V to 500V
Starting at $4.99
Capacitor - 500V, Axial Lead Electrolytic, 80µF
Axial electrolytic capacitor.
  • Capacitance: 80µF
  • Tolerance: ±20%
  • Temperature range: -40°C +85°C.
  • Voltage rating: 500VDC
$2.55
Capacitor - CE Mfg., 500V, ~\frac{50}{50}~ μF
CE Manufacturing USA Made Multi Section Can Capacitor. Reproduced to exact Mallory specs using original Mallory machinery.
  • 50µF@500V, 50µF@500V
  • FP / Twist Lock Style. Solder Tabs.
  • -10%, +50% Tolerance, 55°C Temperature Rating.
  • 1 ⅜"D X 2 1”H.

All CE Manufacturing can capacitors have a two year warranty against manufactured defects.
$40.95
Capacitor - CE Mfg., 500V, 30/30µF, Electrolytic
Reproduced To Exact Mallory Specs Using Original Mallory Machinery. 30/30uF 500VDC Electrolytic. FP / Twist Lock Style. Solder Lugs. -10%, +50% Tolerance, 55°C Temperature Rating. 1 3/8"D X 2 1/2"H.
$36.95