Capacitors

Capacitors are passive devices that are used in almost all electrical circuits for rectification, coupling and tuning. Also known as condensers, a capacitor is simply two electrical conductors separated by an insulating layer called a dielectric. The conductors are usually thin layers of aluminum foil, while the dielectric can be made up of many materials including paper, mylar, polypropylene, ceramic, mica, and even air. Electrolytic capacitors have a dielectric of aluminum oxide which is formed through the application of voltage after the capacitor is assembled. Characteristics of different capacitors are determined by not only the material used for the conductors and dielectric, but also by the thickness and physical spacing of the components.
Capacitor - 350V, Axial Lead Electrolytic
High quality low leakage tubular electrolytic capacitor. Rated for 85° C operation. Tolerance -20%, +50%.
Starting at $1.05
Capacitor - F&T, 450V, 8/8µF, Axial Lead Electrolytic
Dual section electorlyic capacitor from F&T with two 8uF sections rated for 450V. This type of cap is used in Vox AC30 amps. The capacitor body has a 1" diameter and 1.5" length. Made in Germany.
$8.25
Capacitor - 160V, Axial Lead Electrolytic
High quality low leakage tubular electrolytic capacitor. Rated for 85° C operation. Tolerance -20%, +50%.
Starting at $0.55
Capacitor - F&T, 500V, Type A, Axial Lead
Axial lead electrolytic capacitors from F&T. The capacitors have an operating temperature range -40°C to 85°C. Made in Germany.
Starting at $4.25
Capacitor - CE Mfg., Tubular, 450V, 10/10µF
CE Manufacturing multi-section electrolytic "Firecracker" style capacitor (modern polarized electrolytic caps in a tube for a vintage look). 10/10 µF ±20% @ 450 VDC. 7/8" diameter x 2-¾" length. Includes zip-tie and mount square. Great for antique radio restoration. Three wires (Orange, Orange, Black):
  • Orange to Black = 10 µF
  • Orange leads are the anodes
  • Black lead is the common cathode
$8.50
Capacitor - Illinois, 350V, Axial Lead Electrolytic
High quality low leakage tubular electrolytic capacitor. Rated for 85° C operation. Tolerance -20%, +50%.
Starting at $2.25
Capacitor - Illinois, 500V, Axial Lead Electrolytic
Illinois Capacitor Inc. high quality low leakage axial lead electrolytic capacitor
Starting at $4.25
Capacitor - CE Mfg., 450V, 20/10/10/10 µF
CE Manufacturing USA Made Multi Section Can Capacitor. Reproduced to exact Mallory specs using original Mallory machinery.
  • 20/10/10/10uF 450VDC. Used In Dynaco PAM-1 Preamplifiers. This is not a standard design of FP Cap, as the 20 Mfd is B(lank). Standard rolling would be D(iamond) as the high cap section.*
  • FP / Twist lock style, Solder tabs.
  • -10%, +50% Tolerance
  • 85°C temperature rating.
  • 1 3/8"D X 2 1/2"H.

*C-EC20-10-10-10 does contain all four values. This note is indicating that the four tabs for each capacitor section are not marked according to the standard method. The three 10 uF section are marked by D, square and triangle. The one 20 uF section is not marked with a symbol (i.e. blank).
$37.95
Capacitor - CE Mfg., 475V, 20/20/10/10µF, Electrolytic
Made in the USA on Mallory's original machinery.
  • 4 sections - (2) 20μF at 475V and (2) 10μF at 475V
  • -10%, +50% tolerance
  • 65° temperature rating
  • 1-3/8" diameter x 3" tall
$36.95
Capacitor - CE Mfg., 475V, 30/30/30/10µF, Electrolytic
Capacitor - Electrolytic, 30/30/30/10 µF @ 475 VDC Drop-In replacement for Leslie 4 section 30uF/30uF/30uF/10uF @ 475V
For use in Leslie 122, 147, many others.
CE Manufacturing USA Made Multi Section Can Capacitor. Reproduced To Exact Mallory Specs Using Original Mallory Machinery.
  • 30/30/30/10 μF 475VDC.
  • FP / Twist Lock Style. Solder Tabs.
  • -10%, +50% Tolerance, 65°C Temperature Rating.
  • 1 3/8"D X 2 1/2"H.
$38.95
Capacitor - CE Mfg., 50µF@300V, 30µF@25V x2, 10µF@350V
Multi-section twist lock capacitor, four sections - 50uF @ 300 VDC, 30uF @ 25 VDC, 30uF @ 25 VDC and 10uF @ 350 VDC. Manufactured to Mallory specs on original Mallory machinery.
$40.95
Capacitor - F&T, 475V, 16µF, Axial Lead
Electrolytic F&T axial lead electrolytic capacitor
  • 16uF/475V
  • 0.63" dia. x 1.50" long
  • Operating temperature range -40°C to 85°C
  • Made in Germany

Founded in 1948 by Heinz Fischer and Alfred Tausche, F&T Capacitors has over 60 years of experience in producing some of the finest capacitors available today. F&T Caps are known for their great tone and reliability
$5.95
Capacitor - F&T, Multi-Section, Electrolytic
High quality multi-section can capacitors from F&T. These capacitors are similar to the LCR caps found in many Marshall and Hiwatt amplifiers. The body has a 1-⅜" diameter and a 2" length. A 1-⅜" mounting clamp is required. Made in Germany.
Starting at $10.95
Capacitor - CE Mfg., 525V, 20/20/20µF
CE Manufacturing USA Made Multi Section Can Capacitor. Reproduced To Exact Mallory Specs Using Original Mallory Machinery.
  • 20/20/20uF 525VDC. FP / Twist Lock Style. Solder Tabs.
  • -10%, +50% Tolerance, 55°C Temperature Rating.
  • 1 3/8"D X 3"H.

Note: This 3-section capacitor is in a 4-section case. A 4-section insulator such as S-H120 should be used with this capacitor, rather than a 3-section insulator.
$38.95
Capacitor - JJ Electronics, 500V, Axial Lead Electrolytic
Electrolytic axial capacitor rated at 500 Volts. These capacitors have special features which enable them to excel in music industry applications. Low impedance, Low ESR, Wide frequency range.
  • Operating temperature: -25°C to 70°C
  • Nominal Voltage: 500Vdc
  • Rated Capacitance: 30µF - 100 µF (depending on capacitor)
  • Capacitance tolerance (at 100Hz, 20°C): -10%+30%
  • Dissipation factor (at 100Hz, 20°C): 0.18
  • Leakage current (after 5 minutes application of rated voltage): 0.004 C.U.

1.66" length x 0.99" diameter 1.70" lead length.
Starting at $7.75
Capacitor - CE Mfg., 475V, 20/20/20/20µF, Electrolytic
CE Manufacturing USA Made Multi Section Can Capacitor. Reproduced To Exact Mallory Specs Using Original Mallory Machinery.
  • 20/20/20/20uF 475VDC Electrolytic.
  • FP / Twist Lock Style. Solder Lugs.
  • -10%, +50% Tolerance, 65°C Temperature Rating.
  • 1 3/8"D X 2"H.

Great replacement for the can capacitor in the Princeton AA964, Princeton AB1270, Princeton Reverb AA1164, Princeton Reverb AA760 and Princeton Reverb AB1270.
All CE manufactured can capacitors have a two year warranty against manufactured defects.
$36.95
Capacitor - CE Mfg., 525V, 30/20/20/20 μF
CE Manufacturing USA Made Multi section Can Capacitor. Reproduced To Exact Mallory Specs Using Original Mallory Machinery.
  • 30/20/20/20uF 525VDC Electrolytic. Used In Dyanaco ST-70 Amplifiers.
  • FP / Twist Lock Style. Solder Tabs.
  • -10%, +50% Tolerance, 55°C Temperature Rating.
  • 1 ⅜"D X 3 1/2"H.
$40.95
Capacitor - CE Mfg., 525V, 40/20/20/20µF
CE Manufacturing USA Made Multi Section Can Capacitor. Reproduced To Exact Mallory Specs Using Original Mallory Machinery.
  • 40/20/20/20uF 525VDC Electrolytic.
  • FP / Twist Lock Style. Solder Tabs.
  • -10%, +50% Tolerance, 55°C Temperature Rating.
  • 1 ⅜"D X 2 1/2"H.

All CE manufactured can capacitors have a two year warranty against manufactured defects.
$40.95
Capacitor - JJ Electronics, 500V, 40/20/20/20µF, Electrolytic
JJ Electronic multi-section electrolytic can capacitor, 40/20/20/20 µF -10%+30% @ 500 V. 1-1/2" diameter x 2" height (40 x 50 mm). Clamp mount, solder lug terminals. Excellent for music industry applications
$18.95
Capacitor - CE Mfg., 500V, 40/20/20 μF
CE Manufacturing USA Made Multi Section Can Capacitor. Reproduced To Exact Mallory Specs Using Original Mallory Machinery.
  • 40/20/20uF 500VDC Electrolytic.
  • FP / Twist Lock Style. Solder Tabs.
  • -10%, +50% Tolerance, 55°C Temperature Rating.
  • 1 3/8"D X 2 1/2"H.
$38.95
Capacitor - CE Mfg., 525V, 40/40/20/20 μF
CE Manufacturing USA made multi section can capacitor. Made to Mallory specs using original Mallory machinery.
$40.95
Capacitor - F&T, 25V, 25/25µF, Electrolytic
Dual section axial lead electrolytic capacitor from F&T with two 25uF sections rated for 25V. This type of cap is used in Fender amps. The capacitor body has a 1" diameter and 2" length. Made in Germany.
$9.95
Capacitor - CE Mfg., 800V (900V Surge), 25µF, Electrolytic
CE Manufacturing multi-section electrolytic "Firecracker" style capacitor (modern polarized electrolytic caps in a tube for a vintage look). 25 µF ±20% @ 800 VDC. 1-1/16" diameter x 4-½" length. Includes zip-tie and mount square. Great for antique radio restoration. Two wires (Red, Black)
$12.25
Capacitor - 25V, 25µF, Axial Lead Electrolytic
High quality low leakage tubular electrolytic capacitor. Rated for 85° C operation.
Tolerance -20%, +50%.
Measures .52" in length x .25" in diameter
$0.30