You are here

Capacitors

Capacitors are passive devices that are used in almost all electrical circuits for rectification, coupling and tuning. Also known as condensers, a capacitor is simply two electrical conductors separated by an insulating layer called a dielectric. The conductors are usually thin layers of aluminum foil, while the dielectric can be made up of many materials including paper, mylar, polypropylene, ceramic, mica, and even air. Electrolytic capacitors have a dielectric of aluminum oxide which is formed through the application of voltage after the capacitor is assembled.

Characteristics of different capacitors are determined by not only the material used for the conductors and dielectric, but also by the thickness and physical spacing of the components.

Filter these results
Sort By:
products per page
View Mode: List View · Grid View

Pages

(17 pages)
C-EC20X4-475-2D5Capacitor - CE Mfg., 475V, 20/20/20/20µF, Electrolytic, 2.5" Height
CE Manufacturing USA Made Multi Section Can Capacitor. Reproduced To Exact Mallory Specs Using Original Mallory Machinery.

  • 20/20/20/20uF 475VDC Electrolytic
  • FP / Twist Lock Style. Solder Lugs
  • -10%, +50% Tolerance, 65°C Temperature Rating
  • 1⅜"D X 2.5"H
  • All CE manufactured can capacitors have a two year warranty against manufactured defects.
$36.70
Click to read more
C-UD0033-400Capacitor - 400V, Polypropylene, Axial Leads, .0033 uF
General purpose polypropylene film capacitor.
  • Dissipation Factor: 0.001 Max at 1000 Hz and 25°C , 0.004 Max at 10 kHz and 25°C
  • Temperature Coefficient: -200 PPM/°C: -100 PPM/°C, 100 PPM/°C
  • ESR: 53.588 Ohms at 1 kHz and 20°C
  • Self Inductance: 1 Nanohenries maximum per mm of body length and lead length
  • dvdt: 15 V/µs
  • Tolerance: -10 % , +10 %
  • Temperature Range: -55°C to +105°C
    • Above 85°C the rated (DC/AC) voltage must be derated at per 1.25%°C
  • WVDC: 400 Volts DC
  • VAC: 220 Volts AC
  • Terminal to Terminal Dielectric strength: 1.6 times the rated DC voltage when applied between the terminals for 2 seconds
  • Terminal to case Dielectric strength: 2 VAC when applied between the terminals and case for 2~5 seconds
  • Insulation Resistance (Terminal to Terminal): 30000 MINIMUM after 100 Volts DC is applied for 60 seconds at 20°C
  • Insulation resistance (Termi
$0.69
Click to read more
C-EC60-30X2-450Capacitor - CE Mfg., 450V, 60/30/30uF, Electrolytic
  • CE Manufacturing USA Made Multi Section Can Capacitor. Reproduced To Exact Mallory Specs Using Original Mallory Machinery.
  • 60/30/30uF 450VDC Electrolytic.
  • FP / Twist Lock Style. PCB Mount.
  • -10%, +50% Tolerance, 85°C Temperature Rating.
  • 1 3/8"D X 3"H.


All CE manufactured can capacitors have a two year warranty against manufactured defects.


$40.90
Click to read more
SET-CAP-FENDER-010Cap set - for Fender Pro Reverb AA165 (Black face)

Replacement electrolytic capacitor set. Basic set includes:



  • (3) C-ET22-500-FT
  • (2) C-ET80-450-FT
  • (7) C-ET25-25
  • (1) C-ET25-50


Premium set includes:



  • (3) C-SA20-500 (Sprague Atom)
  • (2) C-SA80-450 (Sprague Atom)
  • (7) C-SA25-25 (Sprague Atom)
  • (1) C-SA25-50 (Sprague Atom)


Warning: some electrolytic capacitors can store charge even after the amp has been turned off and unplugged for some time. Always make sure your original electrolytic capacitors do not have a voltage present before touching them.


Starting at $27.75
Click to read more
C-ET16-475Capacitor - 475V, Axial Lead Electrolytic, Capacitance: 16 uF
  • 16µF, 475VDC
  • Rated for -25° C through +85° C
  • Tolerance ± 20%
  • Ripple current rated at 90mA rms at 120 Hz 105° C
  • Measures 26mm in length x 13mm in diameter.
$1.95
Click to read more
C-EC80-40-40-20-PCCapacitor - CE Mfg., 525V, 80/40/40/20uF

CE Manufacturing USA-made Multi Section Can Capacitor. Reproduced To Exact Mallory Specs Using Original Mallory Machinery.



  • 80/40/40/20 µF 525VDC
  • -PC Mount Tabs.
  • -10%, +50% Tolerance
  • -85°C Temperature Rating.

$44.05
Click to read more
C-EC1015X3-450Capacitor - CE Mfg., 450V, 15/15/15/10µF, Electrolytic
CE Manufacturing USA-made Multi Section Can Capacitor. Reproduced To Exact Mallory Specs Using Original Mallory Machinery.
  • 15/15/15/10 µF 450VDC
  • -FP / Twist Lock Style. Solder Tabs.
  • -10%, +50% Tolerance
  • -85°C Temperature Rating.
  • -1 ⅜"D X 2 ½"H.
$39.95
Click to read more
C-ET80-500Capacitor - 500V, Axial Lead Electrolytic, 80µF

Axial electrolytic capacitor.



  • Capacitance: 80µF
  • Tolerance: ±20%
  • Temperature range: -40°C +85°C.
  • Voltage rating: 500VDC

$2.50
Click to read more
C-ZMX-1000Capacitor - SoZo, Silver Mica, 1000V

The new SoZo fully custom silver mica capacitor is a distinct-design capacitor which is manufactured to fully exhibit the electrical characteristics of yesteryear and has custom materials. The overall goal was to manipulate the electrical characteristics to eliminate excess energy and ringing in the out-of-band audio frequencies.


Starting at $8.50
Click to read more
C-EC40X4-525-PCCapacitor - CE, 40/40/40/40µF, 525VDC, Electrolytic, PC Mount
  • CE Manufacturing USA Made Multi Section Can Capacitor. Reproduced To Exact Mallory Specs Using Original Mallory Machinery.
  • 40/40/40/40uF 525VDC.
  • FP / Twist Lock Style. PCB Mount.
  • -10%, +50% Tolerance, 55°C Temperature Rating.
  • 1-⅜" Dia. X 3-½" H.

$40.90
On Backorder
Click to read more

Pages

(17 pages)
Don't see a product you're looking for? Send us your product suggestions!
Subscribe to RSS - Capacitors