Circuit Design

Locking terminal lugs, #6 or #8 hole, 5/8" length, angled. Package of 10

Turrets for use on boards measuring 3mm thick, such as P-HTUR-189-3BK or P-HTUR-189-3R. For 2mm boards, see S-HTUR-SG-2X
Stake and anvil required for mounting.

• Staking Tool is our part number: S-T1715
• Anvil is our part number S-T1717
• For a budget tool set see S-T-STAKE-SET

Eyelets, bag of 10 (mounts in 1/8" hole).

Standard size terminal strips, 1/16" thick bakelite, tin plated steel solder lugs and brackets on 3/8" centers.

Standard size terminal strips, 1/16" thick bakelite, tin plated steel solder lugs and brackets on 3/8" centers.

Standard size terminal strips, 1/16" thick bakelite, tin plated steel solder lugs and brackets. 8 lugs, first and eighth lug common.

Turrets for use on boards measuring 2mm thick. For 3mm boards, see S-HTUR-SG-3X
Stake and anvil required for mounting.

• Staking Tool is our part number: S-T1715
• Anvil is our part number S-T1717
• For a budget tool set see S-T-STAKE-SET

Vulcanized Fiberboard, used for laying out circuits using eyelets such as S-HEYE-A and our staking tool S-T1715.

• .062" thick
• 3" x 15"

Tin plated brass eyelets commonly used on vintage style pickups. The small sized eyelets are also great for smaller point-to-point projects such as DIY stomp boxes. The outside diameter of the barrel is 0.089” and the recommended mounting hole is 0.093” using a #42 drill bit.

Hollow Turret Terminal,Brass, .172" Long, Premium.

• Finish/Plating: Tin
• For Panel Thickness: .125 [3.2]
• Material: Brass
• Mounting Hole: 0.116
• Terminal Length: 0.312
• Terminal Style: Tubular Turret
• Type: Solder Turret Terminal
• Package of 10

Standard size terminal strips, 1/16" thick bakelite, tin plated steel solder lugs and brackets on 3/8" centers.

Standard size terminal strip, 1/16" thick bakelite, tin plated steel lugs and brackets on 3/8" centers.

Standard size terminal strips, 1/16" thick bakelite, tin plated steel solder lugs and brackets on 3/8" centers. Vertical mount.

Standard size terminal strips, 1/16 thick bakelitetin plated steel solder lugs and brackets on 3/8" centers. 6 lug, 1 ground. Second lug common. Similar to the strip used in the Dallas Rangemaster.

Bifurcated turrets for use on boards measuring 3mm thick. Made of nickel plated copper. These are sometimes referred to as split or forked turrets. For use with 2mm boards, see S-HTUR-BI-2S. Stake and anvil required for mounting. Staking Tool is our part number S-T1715. Anvil is our part number S-T1717. For a budget tool set see S-T-STAKE-SET.

Standard size terminal strips, 1/16" thick bakelite, tin plated steel solder lugs and brackets. 6 lugs, first and sixth lug are common.

Standard size terminal strips, 1/16" thick bakelite, tin plated steel solder lugs and brackets.

Standard size terminal strips, 1/16" thick bakelite, tin plated steel solder lugs and brackets.

Staking tool set that includes both the anvil and swage/punch. The set works with standard turret and eyelet sizes commonly used in amplifiers. The anvil also can be used with Y style turrets.

Bifurcated turrets for use on boards measuring 2mm thick. Made of nickel plated copper. These are sometimes referred to as split or forked turrets. For use with 3mm boards, see S-HTUR-BI-3S. Stake and anvil required for mounting. Staking Tool is our part number S-T1715. Anvil is our part number S-T1717. For a budget tool set see S-T-STAKE-SET.

Standard size terminal strips, 1/16 thick bakelitetin plated steel solder lugs and brackets on 3/8" centers. 5 lug 1 ground first lug common

Standard size terminal strips, 1/16" thick bakelite, tin plated steel solder lugs and brackets. 7 lugs, first and seventh lug common.

Turret staking tool for use with our turrets (S-HTUR-SG-2X, S-HTUR-SG-3X, S-HTUR-PR-3S).
For anvil see S-T1717
For smaller staking tool, see S-T1714
Directions:

• Drill 1/8" hole
• Insert eyelet
• Flip board over on to a hard service
• Center staking tool over the eyelet
• Strike staking tool with hammer to clamp eyelet to board

Bifurcated turrets with a screw mount that works on boards with thicknesses of 1.5mm to 4mm. Made of gold plated brass. These are sometimes referred to as split or forked turrets. Includes a mounting washer, lock washer, and mounting nut. The staking tool is not required for these turrets.