You are here

Circuit Design

Filter these results
Sort By:
products per page
View Mode: List View · Grid View
P-ECB-9V1ABattery Box - Gotoh, single, 9 volt

Single 9 volt battery box. See P-ECB-9V1B for single battery box with removable adapter. See P-ECB-9V2 for double battery box.


$13.95
$12.56
You save: 10%
Click to read more
P-PC-SB404BreadBoard - Solderable PCB, 400 point pattern
Solderable PC BreadBoard enables you to transfer your circuit and wires from a plug-in breadboard without recutting wires or changing your layout. This breadboard has the same pattern as a standard 400 connection point solderless plug-in breadboard which has a standard 5-hole strip for each IC pin, just like solderless breadboards. However, it has the advantage that soldered joints provide a more reliable long-term connection than solderless contacts.
The board has four power rails like solderless breadboards, plus two bonus rails for power or signals. There are bonus two-hole pads along the centerline allowing DIL (dual in-line) headers to be used as well as a top side silkscreen to position components. Four mounting holes allow your projects to be secured.
$4.50
$4.05
You save: 10%
Click to read more
P-ECB-9V2Battery Box - Gotoh, Dual, 9 Volt

Dual 9 volt battery box. Two 9V battery compartments, each compartment having its own red and black wires for battery positive and negative connections (4 wires total) allowing for series, parallel or separate connections of two 9V batteries. Four wood screws included. Directions: 1. Refer to the Drawing B and make a hole on guitar body. 57.5 mm (2.26") x 49.5 mm (1.95"), R6 (6 mm = 0.24") 2. Put the box in guitar body and fix it by screws.


$19.00
$17.10
You save: 10%
Click to read more
P-HTAG-40Tagboard - 40 Turret Pins, High Quality
200mm x 45mm, 2 x 20 turrets.
$9.82
$8.84
You save: 10%
Click to read more
S-TSP40LSoldering Iron - Weller, Marksman, 40 watts
  • Weller Consumer Soldering Irons with 3 LEDs
  • Three LED lights for limited application shadowing
  • Round Co-molded soft grip handle design for easy tip positioning
  • Triangular handle area for maximum tip control
  • Stainless steel heater construction
  • Excellent quality consumer iron
  • Input Voltage: 120
  • Power Consumption: 40 watts
  • Tip Temperature: 900ºF
  • Heating Element Type: Nichrome Wound
  • Fiberglass and ceramic insulated

$25.95
$23.36
You save: 10%
Click to read more
S-Z370Analog Multimeter - Volt-Ohm-Millimeter

Functions



  • Interior magnetic version to prevent interference from exterior magnetic field
  • Wide test range and high sensitivity
  • Transistor hFE test function
  • Overload protection diode & 0.5A (5Ø x 20mm) Fuse 1pc

$16.95
$15.26
You save: 10%
Click to read more
S-Z3220Digital Multimeter - YF-3220

Ergonomically designed. Uses one 9V battery, included.



  • 0.5% basic DC accuracy
  • audible continuity test
  • 3 1/2 digit LCD, 0.625" high
  • 10M ohm input resistance
  • 1.5" x 3" x 7.5"(w/o rubber case)
  • overload protection
  • voltage to 1000VDC, 750VAC
  • capacitance to 20 microfarads
  • polarity indicator
  • frequency to 10MHz
  • over range indicator
  • 10A (AC or DC)
  • low battery indicator
  • hFE and diode test
  • tilt stand and case

$44.95
$40.46
You save: 10%
Click to read more
P-HTAG-16Tagboard - 300mm x 16mm, 26 Tags
300mm x 16mm, 26 tags.
$5.25
$4.73
You save: 10%
Click to read more
S-TSPG80LSoldering Iron - Weller SPG80L, 80 watts

The Weller SPG80L is a heavy duty 80 Watt soldering iron. It is ideal for soldering chassis connections in classic amps such as can capacitors and can be used in many other applications. This soldering iron has an indicator light that shows when the iron is turned on for safe use. The barrel is stainless steel and the rugged tip is replaceable. The impact resistant handle remains cool when in use. Features:



  • 900°F tip temperature suitable for chassis soldering and other heavy duty applications
  • Indicator light to show when the iron is on
  • 3/8” chisel tip
  • 6 foot power cord
  • Metal stand included

$43.25
$38.93
You save: 10%
Click to read more
S-T9000-LFXSolder - Kester 48, .031", Flux 66, Lead-free 1 lb Spool

Lead free solder, Sn96.5Ag3.0Cu0.5, 031" diameter, rosin flux, core 66. Kester SAC305 48 Activated Rosin Flux for cored solder wire was developed for lead-free applications to enable soldering of most common metals.


$80.00
Starting at $72.00
You save: 10%
Click to read more
Don't see a product you're looking for? Send us your product suggestions!
Subscribe to RSS - Circuit Design