Circuit Design

Standard size terminal strips, 1/16" thick bakelite, tin plated steel solder lugs and brackets on 3/8" centers. Vertical mount.

Variety pack, 10 feet for each color. Great for color-coded wiring with smaller quantities. 600V stranded. Strands are tinned individually. See photos for detail. UL style 1015, rated to 105 degrees C. Perfect for new projects or rewiring any electrical equipment. 6 Pack (6 colors, 60 total feet) includes:

• Black
• Red
• Green
• White
• Yellow
• Blue

​​9 Pack (9 colors, 90 total feet) includes:

• Black
• Red
• Green
• White
• Yellow
• Blue
• Orange
• Brown
• Purple

See S-W22 for 50 foot rolls of individual colors.

Restore the performance of your soldering iron by replacing the tip. Replacement for S-TWTCP

• PT Series Screwdriver Tip for TC201 Series Iron
• PTA7 - 1.6mm / 0.063" diameter screwdriver tip
• Solid copper, plated with iron all over
• Designed to provide maximum heat transfer from the heater to the tip
• Tinned with lead-free solder
• Use only genuine Weller tips

Metal frame AA battery holder. This battery holder fits a single AA battery and is a great option for electronics that run on 1.5V. It features two solder lugs for connecting wires to the positive and negative ends. The battery holder in the original FZ-1A fuzz pedals looks nearly identical to this holder.

Eyelets, bag of 10 (mounts in 1/8" hole).

High quality 5 pole dual barrier strip. These terminal blocks have a solid PBT base with plated brass terminals and combination head screws. Features:

• PBT Base
• Closed Back Design
• Combo Phil-Slot Nickel-plated Steel Screws
• Plated Brass Terminals
• 5 Poles
• 10 Lugs
• 57.2mm Mounting Centers
• UL 94V-0

Prototyping circuit board that has a general purpose pad-per-hole pattern making it great for general purpose analog and digital use. It is a double-sided board with plated holes, which allows components to be easily soldered to either side of the board. A square pad is provided every 5th hole, which makes it easy to align components on the top and bottom of the board. An anti-tarnish coating protects the copper for a long shelf-life and provides easy soldering.
For fastening your project to a surface see our adhesive standoffs (S-H190)
Features:

• Pad-per-hole prototyping board with plated-thru holes. A square pad every 5th hole makes it easy to align components on top and bottom.
• Double-sided high-quality FR4 glass-epoxy circuit board with plated holes. Components can be soldered to either side.
• 1oz/ft2 copper with an anti-tarnish coating for easy soldering.
• 31 x 19 holes, 0.037" holes are drilled on 0.1" (2.54mm) centers. Four 0.125” mounting holes.
• Size 1 = 1.97 x 3.15in (50 x 80mm), 1/16" thick (1.6mm)

Standard size terminal strips, 1/16" thick bakelite, tin plated steel solder lugs and brackets on 3/8" centers.

Variety pack, 10 feet for each color. Great for color-coded wiring with smaller quantities. 600V rating. Tinned copper. See photos for detail. UL style 1015, rated to 105 degrees C. Perfect for new projects or rewiring any electrical equipment. 6 Pack (6 colors, 60 total feet) includes:

• Black
• Red
• Green
• White
• Yellow
• Blue

​​9 Pack (9 colors, 90 total feet) includes:

• Black
• Red
• Green
• White
• Yellow
• Blue
• Orange
• Brown
• Purple

See S-W33 for 50 foot rolls of individual colors.

Restore the performance of your soldering iron by replacing the tip. Replacement for S-TWP35 and S-TWLC100.

• ST Series Tips: Will fit the SP40L / SP40N series irons as well as the WP25, WP30, WP35, WLC100 series tools
• Precision ground copper tips are plated with iron, nickel and chromium
• ST7 - .031" / 0.79 mm diameter Conical tip
• Tinned with Lead Free alloy

Stripboard made with a phenolic substrate. Phenolic boards are found in many vintage electronics before the use of fiberglass became common. This stripboard features a 0.15” vintage spacing. This spacing is great for vintage-style builds and more easily accommodates axial capacitors and other larger sized vintage parts like resistors and transistors. The board has a 40 x 20 holes (20 strips). Each strip is surface treated making soldering easier than most protoboards and also ensures a long shelf life. Features: High-quality 1.6mm phenolic circuit board Corrosion resistant, surface treated copper strips 40 x 20 holes (20 strips) 6.14” x 3.15” Looking for projects? See our Wide Stripboard projects in our Pedal Layouts & Build Guides section for ideas.

Turrets for use on boards measuring 3mm thick, such as P-HTUR-189-3BK or P-HTUR-189-3R. For 2mm boards, see S-HTUR-SG-2X
Stake and anvil required for mounting.

• Staking Tool is our part number: S-T1715
• Anvil is our part number S-T1717
• For a budget tool set see S-T-STAKE-SET

Prewired AA battery holder. This plastic battery holder fits two AA batteries. The six inch leads are prestripped and tinned stranded wire for an easy installation.

(63/37 Rosin Core) - ..031" Diameter, 1 lb Spool, contains lead alloy. Kester 44 Rosin Flux is an activated rosin formula for use in flux-cored solder wire. Kester 44 Rosin Flux has virtually dominated the field of activated rosin core solders for well over four decades. An outstanding performance feature of this flux is the “instant-action” wetting behavior.

Standard size terminal strips, 1/16" thick bakelite, tin plated steel solder lugs and brackets on 3/8" centers.

Staking tool for small eyelets such as S-HEYE-B. Directions:

• Drill hole using #42 drill bit
• Insert eyelet
• Flip board over onto a hard service
• Center staking tool over the eyelet
• Strike staking tool with hammer to clamp eyelet to board

Ergonomically designed. Uses one 9V battery, included.

• 0.5% basic DC accuracy
• audible continuity test
• 3 1/2 digit LCD, 0.625" high
• 10M ohm input resistance
• 1.5" x 3" x 7.5"(w/o rubber case)
• overload protection
• voltage to 1000VDC, 750VAC
• capacitance to 20 microfarads
• polarity indicator
• frequency to 10MHz
• over range indicator
• 10A (AC or DC)
• low battery indicator
• hFE and diode test
• tilt stand and case

High quality bifurcated (slotted) turrets with a hollow post. These terminals are made of annealed brass with a 100% tin over nickel plating. These slotted turrets closely resemble those found in vintage Marshall amps.

• Triple turret with slot
• 9.12mm height when installed
• 3.18mm diameter
• For 3.0mm to 3.2mm panel thickness
• Recommended for mounting holes sized 2.68mm to 2.78mm
• Bright 100% tin finish
• Knurled underside of shoulder to prevent rotation once swaged

Stake and anvil required for mounting.

• Staking Tool is our part number: S-T1715
• Anvil is our part number S-T1717
• For a budget tool set see S-T-STAKE-SET

Turret staking tool for use with our turrets (S-HTUR-SG-2X, S-HTUR-SG-3X, S-HTUR-PR-3S).
For anvil see S-T1717
For smaller staking tool, see S-T1714
Directions:

• Drill 1/8" hole
• Insert eyelet
• Flip board over on to a hard service
• Center staking tool over the eyelet
• Strike staking tool with hammer to clamp eyelet to board

High quality chassis mount battery holder with a built-in connector. This clip fits standard 9V batteries. The horizontal mount and small footprint of the holder allows for easy placement where vertical space is limited. The two connections use individual solder tabs for hard wiring directly into projects providing a rugged and stable connection.

Turret anvil for use with our turrets (S-HTUR-SG-2X, S-HTUR-SG-3X, S-HTUR-PR-3S).
For staking tool see S-T1715
Directions:

• Drill 1/8" hole
• Insert eyelet
• Flip board over on to a hard service
• Center staking tool over the eyelet
• Strike staking tool with hammer to clamp eyelet to board

Standard size terminal strips, 1/16" thick bakelite, tin plated steel solder lugs and brackets. 6 lugs, first and sixth lug are common.

The SB400 Solderable PCB BreadBoard enables you to transfer your circuit and wires from a plug-in breadboard without recutting wires or changing your layout. The SB400 has the same pattern and spacing as a standard 400 connection point BB400 solderless plug-in breadboard. It has a standard 5-hole strip for each IC pin, just like solderless breadboards plus 4 power rails. However, it has the advantage that soldered joints provide a more reliable long-term connection than solderless contacts. The SB400 has four power rails like solderless breadboards, plus two bonus rails for power or signals. There are bonus two-hole pads along the centerline allowing DIL (dual in-line) headers to be used. BPS prototyping boards use high-quality FR4 glass epoxy PCBs for long life, with an anti-tarnish protective coating for easy soldering.

Standard size terminal strips, 1/16 thick bake lite tin plated steel solder lugs and brackets on 3/8" centers. 5 lug 1 ground fifth lug common.