Circuit Design

Battery Clip - 9 Volt with Vinyl Tab
Single standard snap-on 9V battery clip. Features six inch pre-stripped and pre-tinned leads for an easy connection.
$0.50
9V Battery Cushion - Vinyl Foam Tape, 3M, ½” x 2”
1/2 inch by 2 inch adhesive foam strip for cushioning 9V batteries in pedal enclosures. This black, medium density foam used an acrylic adhesive and paper liner. The high quality 3M materials ensure a durable foam and lasting adhesive. Made with ¼ inch thick foam.
$0.65
Eyelets - Brass, .121 x .125 x .200; MT .0095, package of 10
Eyelets, bag of 10 (mounts in 1/8" hole).
$0.80
package of 10
Eyelets - Plated Brass, Small, .089” x .125” x .150”
Tin plated brass eyelets commonly used on vintage style pickups. The small sized eyelets are also great for smaller point-to-point projects such as DIY stomp boxes. The outside diameter of the barrel is 0.089” and the recommended mounting hole is 0.093” using a #42 drill bit.
$0.85
package of 10
Standoff - M3 Threaded, Adhesive Backing
Adhesive backed standoff with M3 threading. The high-strength adhesive tape allows the standoff to be securely mounted, providing an easy option for mounting PCBs in enclosures. These standoffs use a captive metal nut in a strong nylon plastic base for a durable and lightweight solution.
$0.95
Battery Clip - Premium, 9 Volt, Rigid Frame, T-Style, Shielded Eyelets
Premium 9V battery clip made of a rigid plastic frame with an insulating wall enclosing the battery terminals. This high quality battery snap features nickel-plated brass contacts. The six inch leads are 26 AWG stranded wire, prestripped and tinned for an easy installation.
$1.15
Battery Holder - AA, Chassis Mount, Wired, Single
Prewired AA battery holder. This plastic battery holder fits a single AA battery and is a great option for vintage fuzz pedals that run on 1.5V, such as the Maestro FZ-1A.
$1.15
Battery Clip - Premium, 9 Volt, Rigid Frame, T-Style
Premium 9V battery clip with a rigid plastic frame. This high quality battery snap features nickel-plated phosphor bronze contacts. The six inch leads are 26 AWG stranded wire, prestripped and tinned for an easy installation.
$1.15
Battery Clip - Premium, 9 Volt, Rigid Frame, I-Style
Premium 9V battery clip with a rigid plastic frame and I-style wire orientation. This high quality battery snap features nickel-plated phosphor bronze contacts. The six inch leads are 26 AWG stranded wire, prestripped and tinned for an easy installation.
$1.20
Battery Clip - Vintage Style, 9 Volt, Fiberboard Frame
9V battery clip with a fiberboard frame. This high quality battery snap features tinned brass eyelets that secure the nickel-plated steel contacts to the fiberboard. Wires can be soldered directly to the eyelets allowing for custom length battery connections. This fiberboard style is similar to the 9V battery connectors in vintage electronics such as the Arbiter Fuzz Face.
$1.20
Battery Holder - 9V, Chassis Mount, Horizontal
High quality chassis mount battery holder. This steel holder fits standard 9V batteries. The horizontal mount and small footprint of the holder allows for easy placement where vertical space is limited.
$1.25
Battery Holder - 9V, Chassis Mount, Vertical
High quality chassis mount battery holder. This steel holder fits standard 9V batteries. The vertical mount and small footprint of the holder are great for narrow spaces and work well for any project. See S-H158 for horizontal-mount.
$1.25
Battery Holder - AA, Chassis Mount, Wired, Double
Prewired AA battery holder. This plastic battery holder fits two AA batteries. The six inch leads are prestripped and tinned stranded wire for an easy installation.
$1.30
Battery Clip / Snap - for 9 Volt batteries
9 volt battery clip with 5 3/4" red and black wire lengths. Simple construction and perfect for use in effects pedals. Package of three.
$1.35
package of 3
Alignment Tool - Zenith-Admiral Hex Wrench
GC Electronics 8606 alignment tool with hex and special tip slug. This tool is made of non-conductive Delrin.
  • End 1 - 0.027 in.
  • End 2 - 0.1 in.
  • End 3 - 0.1 in.
$1.50
Turrets - mounting, for use on 2mm boards
Colors Available:
Turrets for use on boards measuring 2mm thick. For 3mm boards, see S-HTUR-SG-3X
Stake and anvil required for mounting.
  • Staking Tool is our part number: S-T1715
  • Anvil is our part number S-T1717
  • For a budget tool set see S-T-STAKE-SET
Starting at $1.93
package of 10
Sponge - for Soldering Station, for cleaning tips
Replacement sponge for soldering stations. Maintain a clean iron tip with this high quality replacement sponge. Using a damp sponge to clean a hot soldering iron helps the solder contract at a different rate than the iron, effectively removing any excess solder from the tip. Make sure the sponge is damp, not soaked, for optimal cleaning.
$1.95
Solder Lug - #6 or #8 Hole, Locking
Locking terminal lugs, #6 or #8 hole, 5/8" length, angled. Package of 10
$1.95
package of 10
Turrets - mounting, for use on 3mm boards
Colors Available:
Turrets for use on boards measuring 3mm thick, such as P-HTUR-189-3BK or P-HTUR-189-3R. For 2mm boards, see S-HTUR-SG-2X
Stake and anvil required for mounting.
  • Staking Tool is our part number: S-T1715
  • Anvil is our part number S-T1717
  • For a budget tool set see S-T-STAKE-SET
Starting at $1.99
package of 10
Standoff - Snap In, PCB, Adhesive Backing
Adhesive backed snap-in standoff. The high-strength 3M adhesive tape allows the standoff to be securely mounted, providing an easy option for mounting PCBs in enclosures. 1.6mm PCBs lock into place using the simple snap mechanisms and can be easily removed if required. These standoffs are also referred to as clip-on, edge mount, edge lock, and screwless standoffs.
$2.05
package of 4
Turrets - Bifurcated, for use on 3mm boards
Bifurcated turrets for use on boards measuring 3mm thick. Made of nickel plated copper. These are sometimes referred to as split or forked turrets. For use with 2mm boards, see S-HTUR-BI-2S. Stake and anvil required for mounting. Staking Tool is our part number S-T1715. Anvil is our part number S-T1717. For a budget tool set see S-T-STAKE-SET.
$2.25
package of 10
Turrets - Bifurcated, for use on 2mm boards
Bifurcated turrets for use on boards measuring 2mm thick. Made of nickel plated copper. These are sometimes referred to as split or forked turrets. For use with 3mm boards, see S-HTUR-BI-3S. Stake and anvil required for mounting. Staking Tool is our part number S-T1715. Anvil is our part number S-T1717. For a budget tool set see S-T-STAKE-SET.
$2.30
package of 10
Heat Sink - dissipate heat during soldering
Temporary Heat Sink. Absorb & dissipate heat during soldering/desoldering sensitive parts. Made in Taiwan.
$2.50
Battery Box - Dunlop, snap-in enclosure
Original Dunlop snap-in, black battery box with snap-closed swing door for effects pedals using one 9 volt battery (accessed via the bottom of the pedal). Cutout dimensions: 2.46" x 1.27", box depth: 0.70", snaps over a panel thickness of about 0.04". Used on Dunlop Cry Baby Wah Wah GCB95 and many Dunlop effects pedals.
$2.50