Item Unavailable

Sorry! You're trying to check out one of our items which is no longer available. Why not check out one of these alternate options?
S-Z5R542Test Lead - Set, Military Specification
Contains: 2 alligator clips, 2 spade lugs, 2 pin jacks (long), 2 pin jacks (short), 2 probe tips, 2 tip insulators and 2 universal test jacks. All have threaded male ends. Also contains two 54" leads with female threaded ends. All parts are rolled up in a convenient pouch. Sealed in foil military package. The ultimate set of test leads!
$6.95
Click to read more about this product.
S-TBM4-EL84Bias Master™ - TAD, with 4 Noval Probes
BIASMASTER System BM4-EL84 Measures BIAS current of any EL84 etc. in your amp. Includes 4 noval probes (2x S-TBMA2-EL84) and english/german operation manual.
The BiasMaster™ allows to monitor the bias current safely and easily. While adjusting the Bias control pot of your amp the BiasMaster™ does show the actual result. This lets you set and evaluate all reasonable biasing range your amp and tubes offers to find and set your personal perfect choice.
The Bias setting has a dramatic impact on the amp's response, break-up and dynamic character.
$195.00
Click to read more about this product.
S-TBM4Bias Master™ - TAD, with 4 Octal Probes
BIASMASTER System BM4 Measures BIAS current of any 6L6GC, 6550, EL34, 6V6GT, 5881, KT66, KT88, KT90, KT100, KT120, 7027A etc. in your amp. Includes 4 octal probes (2x S-TBMA2) and english/german operation manual.
The BiasMaster™ allows to monitor the bias current savely and easily. While adjusting the Bias control pot of your amp the BiasMaster™ does show the actual result.
$195.00
Click to read more about this product.
S-Z150Digital Capacitance Meter - YF-150

Nine ranges give precision readings from 0.1 pF to 20,000 µF. Can be used to check virtually all capacitors for tolerance value, selecting matched sets, etc.



  • 0.1 pf to 20,000 μF, 9 ranges
  • Over range indicator
  • 0.5% basic accuracy
  • Tilt stand
  • 3-1/2 digit LCD, 1" h x 2-¼" w
  • 1.5" x 2.8" x 6"
  • Zero adjustment
  • 1.1 lbs
  • Input protected
  • Low battery indicator
  • Includes case, leads, battery, spare fuse and instructions

$42.95
Click to read more about this product.
S-Z3220Digital Multimeter - YF-3220

Ergonomically designed. Uses one 9V battery, included.



  • 0.5% basic DC accuracy
  • audible continuity test
  • 3 1/2 digit LCD, 0.625" high
  • 10M ohm input resistance
  • 1.5" x 3" x 7.5"(w/o rubber case)
  • overload protection
  • voltage to 1000VDC, 750VAC
  • capacitance to 20 microfarads
  • polarity indicator
  • frequency to 10MHz
  • over range indicator
  • 10A (AC or DC)
  • low battery indicator
  • hFE and diode test
  • tilt stand and case
  • 1.6 lbs.

$44.95
Click to read more about this product.
S-Z370Analog Multimeter - Volt-Ohm-Millimeter
Intermagnetic version to prevent interference from magnetic fields. Double protection of diode and fuse, transistor hFE test function. DCV: 0.25V, 0.5V, 2.5V, 10V, 50V, 250V 1000V. ACV: 10V, 50V, 250V, 500V,1000V. DCA: 50 uA, 2.5 mA, 25mA, 250mA. Ohms: x1, x10, x1k, x10k. Dimensions: 148mm x 98mm x 41mm
$16.95
Click to read more about this product.
S-MAFGENGenerator - Audio Frequency
The oscillation frequency range of this audio generator is between voice frequency band and super voice frequency band. Square and sine wave. 10K ohm input impedance, 10 V rms maximum input voltage. 600 ohm output impedance. Equipped with synchronized input terminals, enabling the high power output signas to be accurately controlled by small signals. comes with test lead and ground lead. 5.9" high x 9.8" wide x 5.1"deep.
$169.95
Click to read more about this product.
S-T5000Jumper Test Lead Set - Clip 35mm, Total Length 24", 22AWG
Set of 10 Jumper Test Leads " Alligator Clips 35mm each. Total Length 24", 22AWG wire. Black, Red, White, Yellow, Green
$3.95
Click to read more about this product.
S-MRFGENGenerator - RF Signal

Compact solid state RF signal generator designed for the hobbyist, service bench and technical instruction. The generator is most suitedfor checking and aligning the IF circuit and tuners in AM, FM, and TV's. 100KHz to 150MHz in 6 bands and up to 450MHz on third harmonics. 5.9" high x 9.8" wide x 5.1" deep. Features:



  • Wide frequency range- 100 Khz to 150 MHz
  • With 1 KHz oscillator purpose of modulation
  • High Stability
  • Output control- 0dB/-20dB/-40dB and fine adjuster
  • Frequency accuracy + or - 5%
  • RF output- 100mV rms appx.

$169.95
Click to read more about this product.
S-TBMA2Bias Master™ - TAD, 2 Octal Probes
Biasmaster Test adapter pair for tubes with octal base,
Octal spare probes (2 pieces = one pair) for use with the BIASMASTER System.
$65.00
Click to read more about this product.
S-CF5S-H6DeoxIT® Fader F5 - Caig, 5% solution

This product is a precision lubricant for moving contact surfaces (faders, switches, potentiometers and other mechanisms with sliding surfaces). It replenishes lubrication lost on surfaces that have been cleaned with solvents or other cleaning solutions.


$16.95
Click to read more about this product.
P-PC-BB400BreadBoard - Solderless, 400 point pattern

Solderless (plug-in) breadboard with 400 connection tie-points (i.e. 400 wire insertion holes) and 4 power rails. Solderless breadboards are great for building and testing new circuits because parts can be easily inserted and removed making them completely re-usable. This breadboard has a 300 tie-point IC-circuit area plus four 25 tie-point power rails. The housing is made of white ABS plastic, with a printed legend giving numbers and letters for columns and rows. The internal contacts are phosphor bronze with a plated nickel finish and a peelable adhesive tape backing is provided for attaching it to a surface. Be sure to check out the Zipwire™ jumper wire kits for use with this breadboard.


$4.75
Click to read more about this product.
P-PC-SB404BreadBoard - Solderable PCB, 400 point pattern
Solderable PC BreadBoard enables you to transfer your circuit and wires from a plug-in breadboard without recutting wires or changing your layout. This breadboard has the same pattern as a standard 400 connection point solderless plug-in breadboard which has a standard 5-hole strip for each IC pin, just like solderless breadboards. However, it has the advantage that soldered joints provide a more reliable long-term connection than solderless contacts.
The board has four power rails like solderless breadboards, plus two bonus rails for power or signals. There are bonus two-hole pads along the centerline allowing DIL (dual in-line) headers to be used as well as a top side silkscreen to position components. Four mounting holes allow your projects to be secured.
$4.50
Click to read more about this product.
S-CAX1W-20Axe wipes - Caig, metal string cleaner, package of 20
Axe Wipes - Metal string cleaner. Pack of 20, individually wrapped
Get better sound quality from ALL your strings
Cleaner, lubricant and protectant for metal strings
  • Prolongs life of metal strings
  • Improves sound quality
  • Dissolves oxidation and corrosion
  • Protects against acid from hands
  • Lubricates for fast / smooth movement
  • Safe to use. No waxy buildup. Contains no teflon, silicone or solvents
  • Package of 20

Use on all metal musical instrument strings;
guitars, banjo, violin, autoharp, hammer dulcimer, mandola, pedal steel, zither, etc.
$13.95
Click to read more about this product.
S-TGTBAS1Bass Player Tech Kit - CruzTOOLS, GrooveTech

Not wanting to leave bass players out, we developed an alternate kit optimized for low-enders. The hex key set is matched to virtually all bass makes, and the string winder has been removed to save a couple of bucks. Like its guitar brethren, the GrooveTech Bass Kit has top-shelf tools that are lifetime guaranteed, and stored in a pouch that will fit into most gig bags. An Easy Setup Guide will make you comfortable with truss rod, action, pickup, and intonation adjustment.


$57.95
Click to read more about this product.
S-CMP02Fretboard Conditioner - Lizard Spit, 4oz.
Removes dirt and stains and slows oxidation of frets. Protects against drying and cracking by moisturizing and conditioning to preserve fret board life. Use Lizard Spit Guitar Polish for finished surfaces.
$8.25
Click to read more about this product.
S-CMP04Cloth - Lizard Spit, Micro Fiber
Baby blue micro fiber cloth for use with Lizard Spit or other polishing products.
$6.25
Click to read more about this product.
S-CMP08Polish - Lizard Spit, VIP Vintage for Instruments, 4 oz.

Lizard Spit vintage polish for all paint surfaces. Removes: Old wax build-up without causing chemical reactions commonly associated with other products. Produces: Brilliant Shine.


$10.75
Click to read more about this product.
S-CGBCP01Care Pack - Lizard Spit, for Guitar/Bass

This Lizard Spit Guitar and Bass Care Pack contains 4 oz. Fretboard Conditioner, 4 oz. Guitar Polish, and a Lizard Spit Micro Fiber Cloth, everything you need to keep your guitar or bass in good condition and looking brand new!


$21.00
Click to read more about this product.
P-PC-PAD1PadBoard - Size 1, Double Sided, Plated Holes

Prototyping circuit board that has a general purpose pad-per-hole pattern making it great for general purpose analog and digital use. It is a double-sided board with plated holes, which allows components to be easily soldered to either side of the board. A square pad is provided every 5th hole, which makes it easy to align components on the top and bottom of the board. An anti-tarnish coating protects the copper for a long shelf-life and provides easy soldering.



For fastening your project to a surface see our adhesive standoffs (S-H190-X)



Features:



  • Pad-per-hole prototyping board with plated-thru holes. A square pad every 5th hole makes it easy to align components on top and bottom.
  • Double-sided high-quality FR4 glass-epoxy circuit board with plated holes. Components can be soldered to either side.
  • 1oz/ft2 copper with an anti-tarnish coating for easy soldering.
  • 31 x 19 holes, 0.037" holes are drilled on 0.1" (2.54mm) centers. Four 0.125” mounting holes.
  • Size 1 = 1.97 x 3.15in (50 x 80mm), 1/16" thick (1.6mm)

$2.95
Click to read more about this product.